Counting matching models…
A zero clearance throat plate for an old portable craftsman table saw. print the pieces as they are laid out. The plug end for the hook is deliberately tight to get a snug fit after a small amount of sanding. Print instructions Print…
Update 1/30/2020: added new dispenser body with slots so you can see how many stamps are left. UPDATED 10/16/19: Added lid option with thinner walls. Tired of having your postage stamp roll unravel in the drawer? Well then have I got a…
Updated 11/28/2020 added old style follower. Updated by request: 2/13/2020 increased diameter by 1mm I found out while re-keying a new Schlage lock today that it appears they have changed the cam on the end of the key way and the old…
I have been working on installing a Koi pond and the liner kit came with a little seam roller to press the liner down where it's glued together, needless to say I broke it so 3d printing to the rescue!
I'm a cabinet maker by trade. Occasionally we get cabinets in from insurance claims which need to be restored, whenever this happens I like to make models of the plastic parts i.e. drawer track sockets, shelf clips, hinge mounts etc.…
This is a tip out tray for sink base cabinets. It's made in three pieces for ease of printing and resizing, in it's current format will produce a tray around 11" long. Use these hinges to attach the drawer front to your cabinet.…
I run into a need for these every once in a while being that I own a cabinet shop. I tried to make this as printer friendly as possible (you'll note the original would have required supports to print).
This is a replacement Pump leaf basket for Hayward brand pool pumps. I go through a LOT of these baskets thanks to the amount of leaves that end up in my pool so I decided to make my own so I can just print another when one breaks. All of…
A print friendly stake for micro sprinkler heads. Print instructions Category: Outdoor & Garden Summary A print friendly stake for micro sprinkler heads. Print Settings Printer: Mk2.5s </div> Rafts: Doesn't Matter Supports: No </div>…
This piece was made to fit a unique situation where the elbow fitting was protruding through the wall (pictured), The flange has a 7/16" recess to accommodate this. There are two versions included, a threaded version which fits 1/2"…
I created this model due in part to the need for a case which would incorporate the Nano Hat Oled as the original aluminum case which is extremely difficult to come by. Print settings: .20 layer height 2 shells 20% infill Supports
I found this "Pet Corrector" at my local pet supply store (second picture), It's a great product and works as intended but at 14 bucks a can for 50 shots and the amount of correcting I have to do with my 4 dogs I needed to find a less…
Just a followup to an earlier design for those who need the old style follower.
This is a support for an oval closet rod. Bracket V1 is the entire bracket if you want to print it with supports. Plate, Peg and Peg2 are an attempt at printing the bracket without needing support material. I haven't had a chance to test…
Here's something I just wanted to design! It's a roller pan for those mini paint rollers up to 4" wide. I have yet to try and print it so buyer beware! ;-) Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2.5 </div>…
Not exactly a remix but an add on to an already neat print! Update: Going with PSomeone's suggestion I added a clamping Mech to the design. I haven't tested it yet, plan on doing that tonight! Print instructions Print Settings Printer…
This clip is one of those pieces that tends to break on your kitchen/ bath cabinets. Print instructions Print Settings Printer Brand: Prusa Printer: Prusa Mk2 </div> Rafts: Doesn't Matter Supports: No </div> Resolution: .30 Infill: 100%…
I purchased this fan for a cargo trailer conversion I'm doing to ventilate the bathroom. When it arrived I found out they do not include an exterior trim ring with it.…
I'm building a cargo trailer camper and I'm using the Ikea Vigda sliding track suspended from the ceiling for the shower enclosure. Unfortunately when you buy the track it only comes with two hanger clips and I needed a couple of extra…
Next in my series of difficult to find parts is this drawer slide rear support from an import cabinet. This turned out pretty well and fit perfectly into the existing bracket. I made the post solid instead of the original I-beam…
Replacement bumper for a full extension drawer track. Print instructions Printer: Mk2.5s </div> Rafts: No Supports: No </div> Resolution: .20 Infill: 90% </div> Filament: NINJAFLEX TPU BLACK
Yet another hard to find drawer track bracket. Revised: 1/6/19 Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2.5 </div> Rafts: No Supports: Yes </div> Resolution: .20 Infill: 30% </div> Filament: Solutech PETG,ABS…
Yet another cabinet drawer support bracket for under mount tracks. Your track should look like the one pictured to work with this bracket. Print instructions Print Settings Printer Brand: Prusa Printer: i3 MK2.5 </div> Rafts: No Supports:…
This is a mounting plate for a store bought shower wand holder. Many of the shower wands come with a holder meant to screw onto an angled tube but what if you aren't using conventional plumbing and still want to use the factory holder?…
My wife broke her hand Lol! This is a repair piece for Ikea's wooden hand model "handskalad" This was made to repair the thumb joint where it connects to the palm but the other finger joints look similar so it may work for them as well. I…
I made this to repair my Delta planer handle which broke several years ago before I owned a 3D printer. I added a picture of the orientation in which I printed it hoping this will provide strength against the twisting force of turning the…
Update: I added a new trigger model (V2) that is designed with a snap off support piece so it can be printed without slicer generated supports, Print the trigger at 100% infill. I copied this device from one I had a long time ago. You use…
This is a bracket for supporting drawer slides in Wellborn brand cabinetry. This track works as-is for the left and right track, no need to mirror it. Print instructions Printer: Mk2.5s </div> Rafts: No Supports: Yes </div> Resolution:…
I designed this cap for use with the Camco brand stack stands https://www.amazon.com/gp/product/B000760FX4/ref=oh\_aui\_detailpage\_o04\_s00?ie=UTF8&psc=1 The problem being solved is our drop down gate on our RV has the typical rubber…
Do you have a dog that loves to swim but won't leave your pool hose alone? We have a couple of dogs that spend nearly every day swimming in our pool! the problem is they are very against our pool cleaner hose being in there with them LOL…
I made this replacement piece to fix a broken handle on our porpoise leaf rake. https://pinchapenny.com/shop/porpoise-pro-heavy-duty This is best printed in something like PETG with the orientation laying down for the main body and the…
Socket for import cabinet drawers.
These are all currently available results.
