All models

Yashica 124G Lens hood (BAY-1)

Bay 1 lens/sun hood, for all cameras with bay 1 bayonet. This was designed in INCHES. Have to convert to mm for printing (2450%)

400ft to 100ft Bulk Film Respooler

MK4SMMU3 PETG Filament used 131.2 g / 42.95 m / 103.31 cm³ 0.4 mm 0.2 mm Infill density 15% Support material yes rotate base diagonaly as on picture Experimental Version 2.1 - 400ft-100ft BASE ONLY Version 2.0 without sidewalls Version…

Tunel insert for Rifter, Combo, Berlingo, Proace City Verso, Doblo

tunel insert into middle console for PSA and Toyota cars 2019+

IKEA FÖRNUFTIG air filter feet for sideways standing

I needed my IKEA FÖRNUFTIG (or FORNUFTIG, as it might need to be spelled to be found by those of you without the accents on your keyboard :-) )to stand on its side to fit where it was going to be placed, and hanging it on the wall was not…

Mazzer Philos Doser Cup Ring

The new Mazzer Philos coffee grinder is awesome. My only reservation is the dosing cup which doesn't have a ridge that would prevent it from going all the way down into the basket, and then making a mess when pulled up. This current model…

Gameboy Camera Case

Simple case for Gameboy Camera Supports are required. I went with 5% infill.

Base for Pixel Arc Holopuck with weight

Add pause on proper layer to insert M10 nuts edit v4: adjusted position of cavity for nuts edit v5: added space for remote. Supports required.

Lens hood compatible with Leica Elmarit 28mm v4

Lens hood compatible with Leica Elmarit 28mm v3

Wet Plate Insert for Graflex 1234 Pack Film Adapter for 4x5

Here is a simple insert that converts the Graflex 1234 adapter into a 4x5 wet plate holder. This fits 4"x5" glass or aluminum plates. Print Settings Supports: No Resolution: .15-.20 Infill: 30%

Dust Cleaner for Photographic Film

Film strip cleaner for 35mm and 120 film. Just slide the film between the brushes There are cavities inside the base for m8 nuts to add some weight. Place stop on top end of the cavity, insert nuts and continue the print. BOM: Vinyl…

Gameboy Cartridge Case for cartridge with rumble motor

print with suports for smoother finish use variabile layer hight bend the conecting part to close the cartridge Edits: v6 - small adjusments v7 - adjusted placement, stronger joint

Shim for doorhandle

schim for doorhable so you dont need to glue magnet to plexiglass

tripod screw

print horizontaly with supports for better strenght

APS Film Canister film removal

Push the leader under un-rolled film and it will unhook the film from the center spool. Usefull tools to rewind and open the casette https://www.printables.com/model/50071-aps-film-canister-tools/comments See video for details:

Simple stand for Eufy C220

stand for eufy C220

Parkside 12v adapter - converter

Print with supports from PETG or more heat resistant material when soldering cables to terminals. Cover the soldered terminals with heastrink. always be carreful with batteries. Dont shortcut or overheat etc..

Replacement funnel for Jobo 1500 series

Replacement funnel for Jobo 1500 series system. Printed with black PETG: 0.2 layer 3 perimeters Supports: snug Top contact Z distance 0.22 Top interface layers 2

Canister for Viewmaster reels

Canister to store viewmaster or meopta meoskop reels. For aproximately 40 pcs. One lid vwith Meopta logo and one lid plain. Lid is tight fit, depends on your printer settings

Control box for B's Original film Processor

Control box for B's Original film Processor arduino based - easy to program and setup to your needs change direction od rotation every 30s timer in minutes from 1 to 30m reset by holding the button for 3sec BOM: arduino clone:…

Buddy3d camera light shade for use with Prusa enclosure and LED strip

When using Buddy3D Camera for Prusa CORE One in Original Prusa MK4/S Enclosure , together with White LED Strip , light will leak into the camera picture, lower the contrast and quality. I created small, simple cover to improve the…

Schuko plug adapter for Schuko plug

schuko adapter for sonicare charger

Ikea Sensible Air Filter Redirection

I printed these to screw them onto the outlet of the air filter. They are at a relatively exact 90° to the back of the fan. I believe they were attached by drilling through and screwing them onto the grille. The corresponding counterpart…

Interview Handle for Rode Wireless Go with box

shortend to fit mk4s

Eufy cam table clamp stand

Shelf or table clamp-style stand for Eufy (mine is 2k pan& tilt) cam, possible for other cameras with same mount. Remodeled screw for wing style. print on the side, use supports v1 - simple edit: more ridgit version added v2 - with base…

Modifications for Large Format Camera Leaf Shutter

Shutter Lens boards for Vega 4x5 camera v4 more simple design v5 more rigid, space for nut Latch to secure lens mount ring to shutter body print 4x needs supports Lens mount for Carl Zeiss Jena tessar 210mm F4.5 lens opening 62.9, secured…

Coldshoe for Vega

Cold shoe for Vega 4x5 camera

Netatmo display from Raspberry Pi and Waveshare 2.7" E-Ink display,

Build a small display for Netamo weather station: https://github.com/zahumenskyduri/netatmo And needed a case for it. Remixed the model, it needs support for screw holes. Pi and display can be mounted with hardware delivered with the…

simple battery frame for lP801437 3.7V ( 801437 ) battery

2x5 Cell Holder for lP801437 3.7V ( 801437 ) 400mAh battery commonly found in onetime vape (e-cig). Friction fit

Fuji Frontier SP3000 lightbox

Replacement for original Fujifilm Froniter SP3000 lightbox. When you want place film info film mask, and light box is missing or not working it's hard to align film to film mask. Frame is designed by me BOM: rocker switch - i used…

Filtration box from Prusa MK4s enclosure with common hepa filter

Hepa filter ventilation box attachable to original Prusa enclosure for MK4/s. Placed on hexagon cutout on back of the enclosure. Designed for common vacuum filter: EFH12W EFS1W HEPA H12 HEPA H13 Electrolux HEPA filter Philips HEPA filter…

keychain Labster film lab - Round

Keychain for Labster film lab in bratislava. Round with mascot

Keychain Labster film lab no support

Keychain for Labster film lab in Bratislava. Without support

Swinging door with Basic Board installed

edited parts: BL - Outside Door Block V4 - tested on my enclosure with mk4s BL - Long Outside Door Block V4 - not tested yet Printed with PETG. 0.4 nozzle, 0.25mm Layer For better seal of the plexiglass to the enclosure, i did put m3…

Viewmaster Image Digitizer

all as the orignal model. did a small adjustments for the lens

Spy Guy by Trefl card holder/box

obal pre herne karty to hier Spy Guy od Trefl rozmer 58x88mm s logom alebo bez ********************************************* box for game cards for Spy Guy game from Trefl card dimensions 58mmx88mm with logo or without logo printer with…

Fujica DL-100 battery door holder

Got Fujica DL-100 camera with broken battery latch. Tripod mount screw was close so why not use it. Created plate to keep the the battery door closed. Used this tripod screw and also created remixed low profile one , to secure the plate.…

Vega recessed board and adjusted Front bellows frame

lens board needs supports you need to use adjusted frame to fit the recessed board

Stand for Spy Guy game figure

replacement stand for Spy Guy game figures, in for on “stone”, with slit for game figure card

Gameboy Cartridge Case for tilt cartridge

Modified original design to accommodate gameboy advance cartridge with movement sensor v8 - adjusted to have same width as original cartridge

Simple cell holder for LP801437 battery

2x5 Cell Holder for lP801437 3.7V ( 801437 ) 400mAh battery commonly found in onetime vape (e-cig). Friction fit printed with 0.2 mm profile speed on MK4s

Compatible with Fujifilm DE100 and DE100-XD Photo Printers

sliced to fit on mk4s bed

Viewmaster Personal Camera mkII sunhood

Push-on sunhood for Viewmaster camera. Print in black, best would be matt or use matt paint for inside. Some supports are required.

keychain Labster film lab

Simple keychain for Labster film lab

ArcaSwiss Foot for Vega Camera

ArcaSwiss Foot for Vega Camera also with heat set insert for tripod screw

400FT/120m film bulk loader reworked

Bike lightmount

for 19mm tube printed from PETG, 3 perimeters, 0.15mm layer, 40% infill prints without support

Simple enclosure door seal with Mechanical Lock Add-on

Simple seal to cover the gap between doors. Modfied original enclosure parts for lock addon. Both seal parts are needed. Ticht fit depends on how your door is adjusted Check out @BuildX work for more leak solutions

Gameboy Cartridge Case - Tamagochi from Bandai

Gameboy case for this special sized cartridge. See my other designs for other cases for odd shaped cartridges. No supports required. v12 - adjusted postition fo sound holes, padding for cartridge

Alzament Spool - autorewinder version

compatible with autorewinder grippy-v2 prototype for better grip

Tominon 105cm f4.5 lens cover

Lens cover for Tominon 105cm f4.5 lens

Front Aperture for Leitz Dimaron 150mm F2.8

Holder for waterhouse stops in front of lens. Projector lens Leitz Dimaron F2.8, can cover 4x5 , but DoF was very shallow. Designed holder for front of the lens, fricktion fit to the lens barrel. Waterhouse stop is pressed to the holder.…

Christmas tree twig support

our beloved Christmas tree wigs broke, and we did not wan to throw him out..Made a prosthetics for him

Gopro Session frame with 52mm filter thread

Printed with PETG Support required. press the filter in, or screw it.

Film Camera Hotshoe-Coldshoe Covers ISO

filmspeed reminder for analog film cameras

Ifixit iOpener case

Simple ifixit iopener case inspired by https://www.printables.com/model/1527193-ifixit-iopener-kit-box Print with suppors.

Light duct for Twinstar 20b

Made a cover from plexiglass for my aquarium and lightduct for twinstar light, so the light goes not shine through plexiglass. Did cut opening in to plexiglass to incorporate the wider side of duckt. supports are required, printed out of…

Gameboy Cartridge Case - Made In Wario

Support for top part are required. My settings for MK4s 0.4mm nozzle, Alza PLA: top contact Z distance 0.22 pattern spacing: 1 Top interface layers 2

Lion Battery 18650 insert for LiitoKala to get alligator clips

To be used with 10mmx10mm battery terminals: https://www.aliexpress.com/item/1005007104657640.html?spm=a2g0o.order_list.order_list_main.82.1f291802poHe9N Print with supports Always be carreful with batteries!

Modifications for Polaroid 110A, 110B and 120 4x5 conversion kit

Ground glass frame to be better usable also with the Lomograflock back / RollFilm / Grafmatic Adapter. From Marten Kolve Shims to hold ground glass

Oscar statue Rode microphone handle

Oscar statue microphone handle for rode mics.. Printed with black and gold PLA. If printed as one piece use supports. Also statues themselves require supports.

Film roll storage/catcher for scanning

Catcher adjusted for thicker tables. Added screw for securing to the table. Box to place dust cleaner ( KINETRONICS Stati-vac ) before catcher and scanner (Noritsu LS600) and Place to put my passive film cleaner . Did my best to created…

Dell WD15 usb cover

Plastic usb-c cover on Dell WD15 brakes easily. Made a replacement which fits my wd15 version. Glue them together