Counting matching models…
FILES UPDATED A standard internal 3.5" Gotek case with 0.91" OLED display window. You should be able to re-use the original Gotek screws with this design. I had just hot glued the OLED screen in place. Print Settings Printer: Da Vinci 1.0…
Overview: This is a tray to hold a SD Card to SATA interface adapter in the lower floppy bay of an Amiga A4000. The SD Card to SATA adapter was purchased from Amazon, I used this device in the photo. You'll need nine screws and some glue…
A simple bracket to mount a Gotek floppy emulator in your Checkmate 1500 Plus using theoptional 3-1/2" floppy insert. There is an arrow indicating the direction to the front of the case. Note: This might also work for mounting a floppy…
This allows the reuse of an old Amiga A1010 external floppy drive by inserting a Gotek PCB. The fascia accepts a rotary encoder, 0.91" OLED display (hot glued in place), and relocation of the activity and 'power on' LEDs (3mm), also hot…
UPDATE: A raft is not require for this part. I erroneously indicated it was needed. But, it would be wise to use a 5mm-10mm brim to minimize or prevent corner lift. What's this for? This is a Gotek panel for Stephen Jones' epic Checkmate…
Note: I noticed after I made one that it partially blocks the 40mm fan envelope. I’ll redesign it in the next few weeks so that it clears the fan envelope. There are now 4 files for 2 parts. Each part has an IGS and an AMF file. Some…
This allows the use of a Mean Well RT-50B power supply module in the A500 PSU enclosure without modification to the enclosure. Note that the 'pocketed' side goes towards the bottom enclosure half. The green power resistors are not…
These are all currently available results.
