Counting matching models…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a solution to and annoying problem feel…
This is a solid Model of the Lgx lite extruder. The model comes from the bondtech's websight but I converted the file from .step to .obj to save others some time if they want to to a quick & dirty mock-up for there printer Category: 3D…
I'm in hopes some skilled cad chads can remix and upload new designs
I printed at .3 layer hight with .8 nozzle
Hornady Shell Holder and trimmer Pilot's to kennedy tool box drawer Print Settings Printer: Folgertech Ft-6 Rafts: No Supports: No Resolution: .3 Infill: 25 Filament: Kvp Pla Red Notes: Printed with a .8 nozzle Category: Sport & Outdoors
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
Works with Ruger BX-25 and Butler Creek 25/22 mags but not the factory 10 shot(fits but tight) For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if…
For a low profile coolant nozzle for cnc manhines As for printing you need to run a high resolution because of thread pitch Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: .1 Infill: 15 Filament:…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
This is only a first draft and is a little crude but works great The idea is that you swing this down and it locks the case feeder form loading more cases into the press All you will need is: 4 m3 heatset inserts 4 m3 X 12mm screw 1 m5 X…
Made to hold up to 14 hornady shell plates in a Kennedy #52611 tool box If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a buck for a coffee Print Settings Printer: Folgertech ft-6 Rafts:…
When I upgraded from v2.4 to v3 I still wanted to use my old mgn12h rail
Made to use the dillon primer alarm on a Hornady LnL AP press All that's needed is a few m3 screws a m3 lock nut and a m3 heat set insert I used a 3d printer leveling knob on the wedge block screw for ease of use but you should be able to…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a solution to and annoying problem feel…
You need two print 2 to make this work and I printed in Pla Category: Computer
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
Adjust the scale to fit very tight and print with the over hang facing the bed and use supports. It may come out a little tight and will not let the stock fold all the way and lock in so I would use a heat gun and slowly heat up the part…
Works with Uzi mags and Colt 9mm ar mags using M5x15mm If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a buck for a coffee Category: Sport & Outdoors
A remix for a 80mm fan for a clean look The holes used for mounting are 3.9mm for small M3 heatset inserts drill to size for large ones -Needs 8 fan screws to complete -Removed buck converter -Added fan surround I used a fixed stepdown…
X back plate for the MZ76v2 to use Lm8Luu Bearings (45mm) I printed in ABS and removed the square nuts to use 5 m3 heat set inserts with 4mm od's Print Settings Printer Brand: Prusa Printer: Prusa Clone Resolution: .2 Infill: 25 Filament:…
For some 1936 Bling Needed items to complete = 4x m3x30mm Stainless screws and 4x m3 Stainless nuts Category: Automotive
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not Category: Sport & Outdoors
There are two files included. Please print one of each to mount a 15 button streandeck to the back of a K65 Lux Rgb keyboard If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a buck for a…
This is to mount a Duet 2 Wifi and paneldue in an Ender 5 plus positioned in a way to get maximum Wifi signal. you will need to move the mosfet to do this mod, use: https://www.thingiverse.com/thing:4888746 The screen cover and mount is…
For Wiha Master Technicians Bench Top 50pc set For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time,…
I remixed the backplate of the eva v3.0 to fit the Folgertech Ft-6
Hornady Pistol metering organizer for kennedy tool box holds 7 standard and 1 Micrometer Measure If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a buck for a coffee Print Settings Printer:…
Hornady rifle metering organizer for kennedy tool box holds 7 standard and 1 Micrometer Measure If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a buck for a coffee Print Settings Printer:…
For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a solution to and annoying problem feel…
Made for the Duet 2 wifi Antenna to mount of a 2020 Printed as seen with supports with roof Category: 3D Printer Parts
Hornady case expander organizer for kennedy tool box holds 7 case expanders and a extra space for spare nuts and bolts or short wrench If this saved you a bunch time, trouble,or a solution to and annoying problem feel free to tip me a…
Needed something better than the heatbreak so i went with a captured bowden tube This is only for the Orbiter V1.4 and will allow you to print with tpu with ease it works fine but could use a little work to make it 100% 12/14/20 Update…
This is a blank cover to modify to your needs Category: Computer
For use with nema 14 round LDO-36STH17-1004AHG with a 25mm fan Print Settings Rafts: No Supports: No Resolution: .2 Infill: 100 Filament: amazon ABS Black Category: 3D Printer Accessories
Duet 2 wifi mount for Sapphire plus Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: 3D Printer Parts
I want start out by saying this thing is large. It is 585 mm long so you’re going to need a printer capable of that size but you can cut off about 60 mm off each side if you have a printer that’s only capable of 500 mm This is made for…
This extends the screen out to clear the dash and adds a 8° of tilt Joying has made a lot of models and there is some variation on the bolt pattern on the deck and the micro sd card slot location recommendations: Print a few layers on the…
You will need a large form printer to print 400x400 or larger the back box is for a V59.AV2 the two av inputs are a RCA and BNC Comments or questions are welcome! If this saved you a bunch time, trouble,or a solution to and annoying…
Made to replace the original screen with a Duet paneldue in the factory location I use the paneldue lcd case form LumberjackEngineering to complete https://www.thingiverse.com/thing:2799628 Print Settings Printer Brand: Monoprice Printer:…
For Spektrum DX3 to replace ageing foam wheel with 1/10 scale touring car tire Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: Yes Resolution: .2 Infill: 100 Filament: amazon PLA Gray Category: R/C…
Are you looking for a sub $20 mod to bring life back to an old brushed on road rc car and make even a driveway difficult and a challenge to drive? Then your in luck This fits 6mm body posts with 65mm spacing Runs off the servo output of a…
This is made to use uxcell Drag Chain Cable Carrier Open Type that is 10mmX11mm for its ease of cable install and is on amazon you will need: uxcell open 10mmX11mm drag chain 2-4) m3X40mm screws (motor top) m3X15mm screws (drag chain…
This is for the old steel Psl mags For a slat-wall with a distance of 75mm spacing with M5x15mm I am using the aluminum inserts in the wall so you may need different t-nuts if you are not If this saved you a bunch time, trouble,or a…
This is for mounting a Paneldue 7in to the top of a prusa frame. Its is a remix of the spool holder offset to the left side Use LumberjackEngineering ( https://www.thingiverse.com/thing:2799628/files ) Front and rear case and Mount…
This is a Remix form Blinkingsun's ft-6 Y-carriage the changes i made are: Y-Carrier Increased size for belt screw holes for m3 and put m3 nut cut-outs in Belt guide Increased size for belt guide screw hole for m3 and put m3 square nut…
This is an adapter for the proclip wired 6,7,8,plus bace plate to a Iphone xs max with apple battery case Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 10…
Used with LumberjackEngineering flexible mount system to mount a PanelDue on Wanhao i3, Maker Select v2 or Cocoon Create and made to use the 4 pin (1x4 Dupont) connector Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't…
For mounting a mini fpv camera (21.8mm wide) on a 2020 For my multi cam, servo Switcher setup Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: Yes Resolution: .2 Infill: 25 Filament: amazon Petg Black…
This is for the side electrical panel in the back of the FT-6 the part # is BFP-12 There is a cut-out for the 110v plug and a 80mm fan Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No…
This is for a Ft-6 (maybe ft-5) with a Maker 713 Standard Carriage a 42BYGH40H-23D stepper motor and a Bondtech BMG-M with Mosquito hotend -moved the bltouch behind the hotend for better cooling with 30mm fan -moved the fan ducts for…
This is for the side electrical panel behind the lcd on the FT-6 the part # is BFP-14. I left it as a blank panel for you to add the fan/lcd/controler you want Print Settings Printer: Ft-6 Rafts: No Supports: No Resolution: .2 Infill: 50…
For a duet 2 wifi and a BTMOS V2.0 12 volt mosfet I made this to press fit on the stock posts and use the factory screws and a washer to hold it down. Some of the holes are a little tight and may need to chased out with a drill and i…
Made to hold a micro Fpv camera on a 713maker Standard Carriage slots under stepper motor and is held in with stock 713maker screw I used the Runcam micro eagle because it's small/light and has a m12 lens I swaped it to a m12 f8.0mm for…
This is made to use uxcell Drag Chain Cable Carrier Open Type that is 10mmX11mm for its ease of cable install and is on amazon Print Settings Printer Brand: Monoprice Printer: Maker Select Plus Rafts: No Supports: Yes Resolution: .2…
I printed at .2 layer height with supports with top distance of .2 used the factory screw and t-nut Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: .2 Infill: 25 Filament: amazon PLA Black Category:…
Do you have a Duet board and want to display it proudly? Is the sticker too big or have an open place for it? Or the need for it to work with your color scheme? Adorn a 20x20 extrusion near you! Print Settings Printer Brand: Wanhao…
This is a kit to help with the noise in the parts in Ft-6 prints The problem I ran into is that the Two motor breakout board for X axis seems to backfeed power between the two motors and adds noise in the print and limits the speed This…
These are all currently available results.
