Counting matching models…
I wanted to print a Shuriken for my kid, but the sharp edges of the original model made me a bit nervous. All I did was chopping them off - all credit goes to the original designer.
This is a replacement leg that is identical to the original Rummikub game. There are 2 versions: rummikub-leg - sits pretty much perpendicular to the board rummikub-leg_angled - sits at an angle towards the middle of the board (like this…
This is an extremely easy and fast print. Because it's very thin, make sure to use a good quality filament so it won't break (I used white PLA+). Print on the side since it's the orientation that'll yield the strongest part. I'm using…
I really liked how the original design slides into the frame so neatly. However, I don't like tensioning the z-rod of my printers since this can easily damage them. My solution was to remove the z-rod guide from the original design and…
When not in use, my door stop is usually wandering around and you can't find it when you actually need it. Now the door stop finally finds its place on the door knob :) Model needs to be printed in TPU or other type of plastic that has…
This is a vertical stand for thick computers (40mm) inspired by a Reddit post . It's not the most fancy stand out there, nor the lightest on material, but it's very simple and sturdy and gets the job done. I've added a version with holes…
This is a remix of a beautiful and thoughtful model by CodeNameX from Thingiverse. I tweaked 3 things: Steeper angle for the device - it'll now face towards you Easily accommodate thicker devices Shorter back support to avoid collision…
Just a simple box that's designed to hold a soft-packaged tissue package and be mounted upside down, ideally under a desk. Package replacement is very easy, as the back of it is completely open. It's extremely easy to print vertically,…
It should snap in place firmly. Some force may be required at first. If you can't get it in or it's too loose, scale the model in the slicer accordingly (and maybe consider calibrating your printer for dimensional accuracy while you're at…
With summer around the corner (at least if you live in the northern hemisphere), it's always a challenge to go for a stroll with the kid in middle of the day. This umbrella holder clips onto the handle of the stroller and includes an…
This is a remix of a beautiful model by @Turge_265572 . I just added 2 holes for 10x3mm magnets. These are designed to press-fit, so use some pliers to force the magnets in if they do not slide in easily (actually, they shouldn't…). Glue…
I'm constantly wrapping my insulating tapes in nylon to keep dust off. Inspired by https://www.printables.com/model/1435426-side-protection-for-electrical-insulating-tape-sei , I designed a fully parametric, two‑part sleeve that snaps…
After several spills by my 2-year old, I knew I had to do something. My idea was to attach a larger base to the cup which will stay attached for until the cup needs to be washed. It came out so good that we ended up making several of…
The original model is made for CR Touch but I used it with BL Touch for a while with very little success. I wanted to switch to the more reliable Micro Touch from Biqu but it's extremely small compared to the others, so I had to make an…
I designed this specifically for this hanger from Aliexpress: https://www.aliexpress.com/item/1005004006702098.html However, it could fit all sorts of clips of the same type. I originally printed this with Polymaker PLA which is a bit…
A remix of this great model by @ceres to expand the “ecosystem” for the commonly used CR2032 battery. I designed this stand so it could be attached to the side of the “regular” AA/AAA batteries stand. It fits 10 CR2032 batteries with…
This is a somewhat original a somewhat remix model, created from scratch using OpenSCAD. I used the BOSL2 library, so if you're interested, you can poke around and change it for your own liking. I created the bracket to fit my Ender 2 Pro…
This is a remix of the rear panel to house a power switch on the back of the Rook Evolution printer. Here's the list of changes I made: Allow for the panel to be screwed from below, like the original screws are screwed in. This adds…
Friction fitting works well with no special print settings or anything. I used regular PLA and it works just fine.
It's designed to exactly fit 180mm printers like the Prusa Mini. I used OpenSCAD with the BOSL2 library, so if you're interested, you can poke around and change it for your own liking. It's designed to fit an European outlet, but if you…
Going to Maker Faire in Prague this weekend I thought it'd be cool to have the entrance QR code printed on a badge, so I quickly put together an OpenSCAD script for that. Simply put in your code, replacing XXXXXX in the file, and put your…
The magnetic front cover (the “door”) of the Rook Evolution is nice and all, but it's super inconvenient when you need to open it, because you need to toss it somewhere before you can do anything. That is why I set to design a hinge, and…
The original Rook Evolution door is missing a handle, so I made one taking inspiration from the Original Prusa Enclosure . The handle attaches to the already existing panel connector at the back. With the added thickness, a longer screw…
These are all currently available results.
