Counting matching models…
4-23-2023 - I have added an additional file labeled ‘CALIPER CASE TOP loose fit’ This is a case to protect an inexpensive (plastic) caliper. It has a friction fitting top and standoffs inside the case to prevent excess movement and…
This is an attachment for the Makita trim router for edge band trimming. It is designed to use with a 0.5" bit. The mounting plate allows for micro-adjustments to allow for a perfect trim. I use a bullnose router bit to avoid an edge…
4-29-2025 – I am uploading a new model v2.6 of this Oral B replaceable battery -operated toothbrush handle case. This case solves several problems - the lid now snaps together, the lid fits and stores under the base (when traveling the…
This is a Vesa mount for a Raspberry Pi case. This model has been changed because the bottom was not entirely flat. Version 1.7 is now available and should be used. No other changes were made. The Raspberry Pi is mounted is a snap fit…
4-7-2024 The Amazon Firestick remote now comes in a new larger version called the Max Firestick. I have modified the case to accommodate the new remote. It is labeled as the Max version. I do not own the Max version but made the changes…
This is a banana stand - nothing really to explain. This should help banana to stay fresh longer. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 4 layers Infill: 35% gyroid infill…
This is a snap fit box to store a Mach3 Razor. It is ideal for travel since it can hold 2 extra blades. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: eSun PLA various…
snap-on attachment for a Rigid vacuum nozzle to allow it to roll on the floor instead of scraping the floor. This item can use standard 608 bearings but I print my own bearings using - https://www.thingiverse.com/thing:2598427 If you…
6/27/2019 - I made the clip very slightly thicker. I think it is an improvement. The locking collar on the top of the hot end keeps the PTFE tube from slipping out. The lock is only effective when it is lifted away from the hot end. When…
This is an upgrade to the Kreg Pocket Hole jig. The Kreg device as shown is no longer sold but I am sure that many thousands were sold in the past. It does an impressive job but is cumbersome to use especially when you need to cut…
This not really a remix but an addon for an already great project. I shorted the handle and added the metric number to the top. I also included a blank top handle for those who like to guess. To make the hex key holders you will need to…
Highrise has nice depth stops but the holder does not fit in the newer Dewalt drill cases. The new cases have transparent plastic on one side and yellow plastic on the other side. The new case can be linked together which is an advantage…
This fixes the problem of the Makita Trim Router blowing the air downward in a CNC machine. It also acts as a muffler to dampen the high frequency sound coming from the air, motor, and bearings. The air diverter is held in place by the…
This is a cleaner for the refillable K cups. The cups I use are listed: https://www.amazon.com/gp/product/B00LHCCR92/ref=ppx\_yo\_dt\_b\_search\_asin\_title?ie=UTF8&psc=1 Place the cup full of coffee grinds over the three cleaner blades…
This insert can not be found in the market, the fit is very nice Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: standard Infill: standard setting - 20% Notes: fits very well, this insert can not…
Although I designed this tool to align the Y rods on my Prusa MK2 Bear modification, it can work equally as well on the Original Prusa MK2. Why do you need this alignment? If the Y rods are not parallel and properly separated, stress will…
I have a Prusa CoreOne +. I printed this with PLA, 3 perimeters, 15% infill, no supports. The print took 7 hours, so it was ready to use in the morning after an overnight print. I am adding a portable version of the water tank dryer that…
I have built the Prusa i3 Bear Half ( https://www.thingiverse.com/thing:2562174 ) which is a Prusa i3 frame upgrade. Cutting the 20x40 to the correct length is critical to obtaining a square frame, but in actual practice such cuts are…
eSun makes a spool that can be split in half by removing two bolts. With my object, you can replace one half and have a Masterspool. The bolts used are M6x34, you will need 2 bolts and 2 nuts to make the second spool since you will reuse…
change the connection sleeve to fit 2.25" vacuum systems Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 10% Filament: PolyMaker PETG, flex Category: Tools
I have remixed this cyclone THINGIVERSE 1447214, to use on my CNC machine. I needed connections for standard 2.25-inch vacuum hoses a small capture container with a wide mouth. I made the cyclone from PLA with 6 layers and 30% infill. I…
This is an aid for filling the Prusa USS Drybox desiccant bins. It is a quick and easy print and saves time and frustration. Thanks to a helpful comment from GTL, I have made adjustments to the original model. It is more stable when…
This a travel case and bush head protector for the Oral-b Vitality toothbrush. I believe this will only work with the Vitality model (it does work with the old and new versions). This case has been tested for over a year and has several…
The extruder cable is the thickest and heaviest of the 3 Prusa cables and tends to sag with time. This will cause it to drag on the print bed and may loop over and catch the heater bed cable. there are several fixes: tie a string to the…
This a replacement part for a Hitachi sliding miter saw model C 10FS. This may work on other Hitachi miter saws. The table inserts become damaged after much use and need replacement. The inserts are longer than the 3D printer bed, so they…
This is a remix of two objects to make a ball bearing Polymaker spool hub. The thing files are: https://www.thingiverse.com/thing:3604939 & https://www.thingiverse.com/thing:3652656 The SCAD ball bearing file was the 5-ball design that I…
This is a modified Original Prusa MK2 fan nozzle shroud. The original fan nozzle did not fit well and also directed too much cooling toward the heated nozzle. This resulted in THERMAL RUNAWAY and lowering of the hot end temperature during…
PLEASE POST A MAKE With years of rain running down the house downspouts, they shrink! They are too shore to reach the drainage pipe and water spills onto the ground. To the rescue – the Drainpipe Extender. I have 3 pictures: 1. Before…
The wet toothbrush drains on the countertop and creates a mess. This allows the drainage to be trapped preventing staining. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament:…
When building with 20x40 V-Slot Linear Rail, and the project is completed, there is no way to add parts because the end of the rail is closed, and a new nut cannot be inserted. With the drop in nut any place on the rail can be accessed.…
There are 2 sizes depending on the pill’s size. Thyroid medication is a very small pill and is taken alone on an empty stomach. The container has a lid marked ‘Thyroid’ but there is also a lid with no label for a small pill such as for…
This covers the plumbing utility that gives access to the drain pipes. I believe it is a code to have access to this cleanout port but the port itself is not nice looking and is often located in plain view. The cover base fixes to the…
8-25-2020 This STL file has been updated now that I am proficient in Fusion 360. This is a wrench to tighten the nut holding the PINDA probe. Because of the location and size, it is difficult to do with the needle-nose plyers and there is…
This is a cover for the water cutoff valve. The handle is not centered on the actual valve so the cover can not be in place when the valve is closed, but this helps indicate the valve is closed and not open. It is normally open so the…
This remix uses the excellent mechanism of V3 but changes the magnets holes so they can use the original magnets easily, All the assembly instructions are with the Hackman V2. You must use V3 parts except for my remix. I suggest printing…
The Oticon charger has a long USB charging cable which is difficult to pack when traveling. This object attaches to the bottom of the charger and allows the wire to be wrapped neatly and secured. You will need 3 1/4 bolts each 1/4" long.…
This covers the pressure regulator valve. The slip-on cover is easily removed for access. Print Settings Printer Brand: Prusa Printer: Mk2.5s Rafts: No Supports: No Resolution: .2 Infill: 20% Filament: Atomic petg white and black…
These are all currently available results.
