Counting matching models…
Lamp shade printed in transparent PET-G, vase mode with thick line 0.7 mm for 0.4 nozzle up to 1 mm for 0.6 mm nozzle. To be used with LED light source - one should pay attention to lamp/bulb working temperature.
Made out of Rosa3D PET-G (not a surprise ;)) weights around 57 grams and takes 2,5 hours to print in 0.24 layer height and some speedy profile setting. The project keeps flat surface for a label sticker, yet lacks the graduation for…
A washing machin has teared my wife bra shoulder strap. Both ring and "eight" were destroyed. The fix was needed - infant feeding bra. Open designs were made to avoid ripping and sawing strap loops - stitches with high load and…
A remix of a great model to hold Pokemon play cards - 64mm wide ones. Recommended 3 wall and a kind of filament saving infill pattern - like support cubic or lightening.
I had had enough of AA batteries rumbling in the drawer. So I have designed an Ultimate Honeycomb Battery organizer. This geometry provides high strength, high pack density and so versatile options of stacking the honeycombs - see…
A car was missing plug/cover for windscreen sprinkler tank filler. Simple design, mant to be snap fit on the genuine filler. Might work for others GMC/Opel models. Internal diameter is 46 mm, internal height 10 mm. Print Settings Printer…
After AA Ultimate Honeycomb Battery organizer here comes AAA organizer. This geometry provides high strength, high pack density and so versatile options of stacking the honeycombs - see attached photos. Organizers can be aligned both…
A hart in a hand for someone close to Your heart. Made as a practical desktop piece. It can express vivid emotions and intentions as demonstrated in pictures. Can be printed without supports, lightening infill will work and reduce print…
A quick design for practical Mija sensors. To be printed in vase mode: 1mm line width , 0.25 layer height, 4 bottom layers, pay attention to volumetric speed with such wide line Each mount can be used as free standing, although screw one…
This is right side case for Teaching Tech system dedicated for SKR E3 mini V3. Remix is adjusted for radiator holding studs.
I have been using Sharpie Marker Color Blender by MakeAnything to color my prints, and I have realized, that I have no proper holder for Sharpies. There it is! It holds 10 Shapries, tip down (yes tip down is the correct way) or tip up.…
The service stand and cup (for up side down position ) for Honda CN250 carburetor - KEIHIN VE. The main stand has slot in the base for convenient attachment and top clamp so the carburetor body can be hold in tilted position. The cup is…
A job for a friend's friend - that's why no picture of mounted one, it was a remote assignment. The handle was printed with PET-G, no support required. A good example of design case of replacement part using FDM technology with it's…
Printed in 40 ShD elastic base filament with black TPU letters on top. Main body printed around 30mm/s with 1mm retraction on DD extruder, 3 walls, 4 top and bottom layers, 20% gyroid infill. Filament swap can be tricky - I did slow down…
Simple print with PLA or PETG-G. The location of guides was designed to assist right-hadand operator to hold an item being cut.
A simple template or check for blade sharpening angle - chisel or hand plane or spoke shave you got it... Notch is for check, chamfers for setting blade in sharpening guide. Fusion 360 design file included if one wants different angles or…
TV remote controller (or any other controller) can get lost quite fast, especially with help of little hands of little kids :). To avoid the frustration of seeking and bouncing a controller around in periodic manner, this small and neat…
Guide inserts for 12mm chisel (Irwin Marples and 4mm (market brand). I have added a riser to hold better trapezoidal chisel blades - paring chisels. There is also a dedicated clamp for 4mm chisel (cold work up to 6 mm). Just a upgrade to…
Victorinox Pikutek curved knife sheath. I felt pity just trowing fine blade into box with other knifes. Cover should protect blade mor than fingers :). Optimized for thick spirale vase mode. Print with 0.7 line width, and 3 to 5 bottom…
Hero Me Gen5 is a great suite, yet since I have started using Titan extruder in direct drive configuration , adapter for mounting it was missing. So I have designed one to work with stock Ender 3 hot end and X carriage -…
Clock face with roman numeral to help learning time reading and roman numerals the same time. Printed in two tone with filament change on the right layer(s) to get desired effect. Indicators printed separately, assembled with click. Shaft…
Inspired by other projects alike, designed with Fusion 360 to be printed in vase mode. Designed this way is more convenient for left handed users. To make it "right hand" version is enough to mirror the item along long axis in a slicer…
Honda CN250 Helix - Fussion seal between transmission cover and it's filter. Flexible materials only
The replacement outer sliding part for rear drive shaft. In this case, genuine part did snapped clean with broken M2 screw it the hub. Flexible part no is a mechanical circuit breaker - it will skipp or detach in case of real axle…
Simple, useful print, with compliant mounting. Print flat site down with PLA or PET-G A text can be embossed using a slicer and/or multi color print.
A replacement part for a broken travel suitcase foot. Mirror the object to fit left and right site. Designed to be printed with TPU or other hard flexible without the use of supports. Printing instructions make sure that Elastic filament…
Genuine vacuum adapter was thin, injection molded and has broke apart. So this design without loosing internal cors section has thicker walls, better fit to blade housing and deeper hose socket. Print with support to have clean mounting…
Holder, ergonomic grip For those short yet favorite crayons that can be use a bit more. Vase mode printed, spring loaded construction (use 0.8 to 1.0 mm layer width)
Design The item was design to provide better everything ;) above factory solution: better grip to floor, better unfold procedure with a foot, better storage position, better noise dumping on close action, better longevity thanks to…
Not much to add, fast print for 60 mm OD electrical installation cans. Can be used to protect internals for time of finishing and painting. Category: Household
These are all currently available results.
