Counting matching models…
I made the adapter after upgrading my stem. My new handlebars didn't come in the mail yet and i had a group ride scheduled for the weekend. after mounting make sure the slit is at the top of the stem. also make sure that it is properly…
the sponge filter is designed for suction cups to be added. It's also possible to put the base of the filter under a small layer of substrate. it should work fine with most small cylindrical airstones and has tested to be good in my…
Needed to rise my 65 in TCL tv 8cm to fit a center speaker under it. I didn't find sturdy solutions online on printables so i made my own. Print in any material, with standard settings and one of these will handle a human easily. fits…
W(MT)W 3D-Printed Center Channel Speaker This is a 3-way, 3D-printed W(MT)W center channel speaker designed specifically for home theater use. Thanks to a low crossover point between the midwoofers and midrange , it avoids the common…
This motor mount was created to be easy to print and mount. After printing, scratch the outer 1mm of the print, apply hot glue and stick in the nose of the aircraft. It has been tested with the t-motor 2814 and 2820 motors. make sure to…
Was servicing an old bike, noticed one of these missing. Quickly measured and printed my own. works great, my brother uses the bike to commute and do some XC with it and its holding up.
A very simple turn signal lever designed after 2 peaces of the original one. may be a bit tedious to put it and may require some sanding to get it to move smooth. Mine took a month to wear in and feel like the original one. Installation…
Good for low power applications (I suggest staying below 50w), I use it for Dayton audio 50W shakers. Drives them very nicely. Also tested with the Hexibase 7th order band-pass 4in sub which also worked nicely. Due to the nature of the…
These are all currently available results.
