Counting matching models…
This is my design for self leveling / gyro cup or a MUG holder. You can install on adult walking aid, baby stroller handlebars for bicycles. I was inspired from the design…
I bought an aluminum profile in 2020 for may ANET AM8 upgrade. It turned out this model of Simplex manufacturer. I did not find a suitable T-nut, because the inner dimensions are slightly different, so I designed one that fits this…
Yet another Kobayashi Fidget Cube. 09/12 - Update for less support. I refined the model to print with a 0.6 nozzle, the spacing between the parts was adjusted accordingly. Of course with a 0.4 nozzle the part can be printed. Printed with…
This is my rotary tool (dremel) 50mm sanding pad. I have used M4 screw+hex nut. Print Settings Printer: Creality CR-10 Rafts: No Supports: Yes Resolution: 0.1 Infill: 20-40% Category: Parts
Small gift box, dimensions: 230x165x25 cm. Suitable for half A4 pages. With the option of laces to close the gift. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Infill: 10-20% Triangle…
I decided to design wheels for my RC Plane models. The printed wheels are 30 to 50 percent lighter than standard wheels. The base is printed from PLA. Printed wheel from TPU flexible material. The wheel hub fit to 4mm axle Print Settings…
My Dyson's v6 clip was broken, so I re design the button and print it. Print Settings Printer: Creality CR-10 Resolution: 0.2 Infill: 30% Filament: Tesla PLA Black Category: 3D Printing
No more throwing an empty filament roll. Attached are a number of models for drawers, full height, half height, with inner wall ... The drawers fit to spool size: Inner circle: 95mm. outer circle: 200mm. Hight: 68mm. Also drill holes Jig,…
For the purpose of grinding / sanding round corners. I used double sided tape to glue the sanding paper to the tool. The tool with 4 different radius R1 = 15mm R2 = 20mm R3 = 25mm R4 = 30mm The tool is 250mm height. Print Settings Printer…
Futaba R7008SB receiver Holder Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 35% Filament: Tesla Filament PLA RED Category: 3D Printing
This is a case for MKS GEN L ver 2.1 The cover part included a PUSH BUTTON for RESET. Also you can install a 60x60 DC FAN. Updates 24/10 - Add reset button for MKS GEN L ver 1.0 02/11 - Add snap lock (V2 cover & base) Print Settings…
Case for Raspberry Pi 3 model. Case Base Case Top Case Top with LOGO Category: 3D Printing
For all those who are making soap bars! This is a tool for you :) You can use it for Beveling & Clean the Edges of your new soap The model is printing with NO SUPPORT. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't…
New design. For X20 & X20S Gimbal protector. It is also protecting the switches & potensiometer. Printed also in GLOW IN THE DARK PLA. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter Supports: Yes Filament:…
I was always looking for a solution for a balsa planer tool, that will be wide enough. I didn't find a suitable tool so I planned a suitable tool that uses with standard blades. This tool is not intend to replace a professional tool. I…
Never again crawl under the basin to attach water lines to faucets. Conveniently and easily secure faucets to vanities with water lines attached. 2 Part nuts, with 2 holding screws. Category: Household
For the purpose of sanding a leading edge of foam wing with a balsa coating, I designed a sanding block fitted to the profile. Base on NACA 2415 dimension. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Yes Supports: No…
Attached is support for the FRSKY TENDEM X20(S) transmitter. lder suitable for this model. So here is my desig for the support/holder. You can use a single leg or dual legs. Also my X10(S) Support :…
This is a case to install standart servo size, in side position for RC PLANE WING. Print Settings Printer Brand: Creality Printer: CR-10 Supports: Yes Resolution: 0.2 Infill: 25% Filament: Tesla Filament PLA RED Category: 3D Printing
Potted funnel, allows water to flow at different heights in the ground. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 200 Filament: Tesla Filament PLA RED Category: Household
Tool for easy cutting soaps. Of course it is cheaper and simpler to purchase such a tool, but I still decided to design and print the tool for myself. The width can be extended from 7-11cm. Cutting soap from 0-2.5cm Need only 6 x M4-25mm…
FRSKY receiver ARCHER RS protective case. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Filament: Tesla Filament PETG Category: Hobby
The model was designed in conjunction my daughter, and from there the hands grew as a base for the Menorah. Chanukah is the holiday of unity of all the people of Israel and therefore the chosen base is the Star of David. In the upper…
Funnel for watering a pot from 360 degrees around. Allows the water to flow all around the "RING". Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: Doesn't Matter Resolution: 200 Infill: 5 Filament: Tesla Filament…
Frsky Horus RP-SMA Dummy load cover Category: DIY
This is a mini coffee cup table holder, table size ~20x20 cm. Print Settings Printer: Creality CR-10 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% How I Designed This Design Software I was using Fusion 360 for it.…
Attached is support for the FRSKY X12S transmitter. The leg is updated to V2 after some feedback. This is a redesign from my X10S : https://www.thingiverse.com/thing:2843888 Bill of materials : M3x20mm Round Philips Screw + M3 Nut - for…
Attached is support for the FRSKY X10S transmitter. I recently purchased the new FRSKY remote control and found that there is no support/holder suitable for this model. The grip is wider and the handle is coated with rubber, which I did…
This is my design for the bracing frame for the CR-10 printer. There are two types of adapters: the lower adapter is designed to connect to the existing M5 screws of the frame, the top adapter with holes for M4 screws, for connecting to…
I decided to build a filament drying machine. Not because I need, but because I can. The principle of operation is, the heating element glued to the bottom of the pot, connected to the temperature controller, which controls the constant…
These are all currently available results.
