Counting matching models…
Low Poly Rose for Vase Mode Printing. My attempt to model a low poly rose for vase mode printing. Of course you could also print it the normal way “not in vase mode” for a special looking rose! I also designed a stem to be glued to the…
Paper Embosser Stamp Heart Liked the embosser stamp, but did not find a heart shape, so I made one. The paper may show some creases around the shape, that's normal. It's reversable so you can use it to Emboss or Deboss. Update: Added a…
A Flower Bouquet Vase designed for Vase Mode printing. For a sturdier print (Thicker Wall), use the following settings: Set the number of perimeters and bottom layer as you like, Set the top layer to "0" (no top layer), Set the infill to…
This Low Poly Rose Stem is specifically designed for my Low Poly Rose. It can be printed in Vase Mode or regularly. Different versions available. Apply little glue between the stem and the rose and let it se well. You can find the Low…
Skull Paper Embosser Stamp Easily emboss a Skull on papers. The paper may show some creases around the shape, that's normal. It's reversable so you can use it to Emboss or Deboss. My settings: PETG Printed at 0.2 mm layer height 50%…
Screw Fridge Magnet A simple note holder fridge magnet. Requires a magnet to be glued into the cavity. Use a strong magnet. File Name Magnet Size Note Screw V2 4x2 4x2 mm (actually it measures 4x1.75 mm) Note Screw V3 6x2 6x2 mm Update :…
A Bomb Container, so your gifts will have a better impact :) For the top part, swap your filament (color change) for a colorful look. I printed it with no supports or brim. Hope you like and share your make :)
Designed to hold a framed 3D Painted canvas. Due to its fine tolerance, best to print at 0.1 mm detail setting. You can find the Frames here: https://www.printables.com/model/543221-frame-your-filament-paint The Filament Paint “Starry…
Lapel Pins - The Daisy - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry,…
Garden micro spray nozzle for lawn irrigation replacement. Pre Supported, Remove the support tab after printing! Some cleanup might be required. Happy Printing :)
Phone Speaker Amplifier Stand, Powerful Audio Boost. It really makes a difference! Important: Print it standing straight, just barely touching the print bed, not resting on its legs, so the support can reach inside. See attached photos.…
Lapel Pins - The Alphabets - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to…
Lapel Pins - The Low Poly Heart - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part, print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and voila,…
Daisy Flower Fridge Magnet - Color Change Decorate your fridge or whiteboard with magnetic charms. Recommended print at 0.1 mm layer height. Color change at 4.0 mm. Requires 6x2 mm magnet. You can add a stem to the flower, found here:…
Lapel Pins - The Cat - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
Lapel Pins - The Butterfly - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to…
A Flower Vase, designed for Vase Mode printing. Goes well with this Vase https://www.printables.com/model/657155-vase-of-hearts-ii-vase-mode-print If you don't want to print in vase mode, i.e. for thicker wall, use the following settings:…
A fast to print Bookmark featuring Nightmare Before Christmas' Jack Skellington, Sally and Zero! Happy Printing :)
Lapel Pins - Jack - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
Using the Microphone Flag allows you to place your logo on the mic. This is an easy to print cubical mic flag. Print with No Supports. After printing, place a foam sponge with a path in the middle to grip the mic, and insert the cover to…
Double Poles Magnet Insert Helper Tools This tool helps you to consistently grab magnets in a desired orientation to insert in printed parts. Add a magnet with opposing orientation in both ends (Marked N and S). Tiny bit of glue might be…
OK Sign Paper Embosser Stamp Emboss an OK Sign (Hand gesture emoji) on papers. The paper may show some creases around the shape, that's normal. Attention! Please be aware that these embossers are intended for fun and decoration crafts and…
A Flower Vase, designed for Vase Mode printing. Goes well with this Vase https://www.printables.com/model/655793-vase-of-hearts-vase-mode-print If you don't want to print in vase mode, i.e. for thicker wall, use the following settings:…
Star Wars Stormtrooper Paint Size: 76x76 mm Print at 100% infill with a layer height of 0.07mm with a base layer of 0.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA…
Kuwait Towers The iconic towers in Kuwait, which serves as a water reservoir and a tourist attraction in Kuwait City. With a Viewing Sphere, 123 meters above sea level, the sphere features a revolving platform which completes a 360°…
Stem for my Magnet Flowers This Stem can be attached or glued to my fridge magnet flowers. You can either add a magnet to the stem and attach the flower to it, Or use glue for permanent attachment. Stems with 2 different magnet cavity…
A Planter Pot designed for Vase Mode printing. For a sturdier print (Thicker Wall), use the following settings: Set the number of perimeters and bottom layer as you like, Set the top layer to "0" (no top layer), Set the infill to "0" (no…
This is a replacement for the Whirlpool Dishwasher Salt Funnel. Used to add dishwashers' salt to the dishwasher. It's is regularly misplaced, so I made this to have a replacement available if the original one is lost. How cool is it to…
Lapel Pins - The Owl - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
A Multiface Ghost, you can change the face with a twist. No support needed, and you can print with Zero infill. An opening at the bottom of the model allows you to insert an LED Tea Light to glow his eyes and mouth. you can use Tea Light,…
Lapel Pins - The Bow - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
A Planter Pot designed for Vase Mode printing. For a sturdier print (Thicker Wall), use the following settings: Set the number of perimeters and bottom layer as you like, Set the top layer to "0" (no top layer), Set the infill to "0" (no…
Lapel Pins - The Camel - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry,…
Print at 100% infill with a layer height of 0.07mm with a base layer of 0.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Prusa Azure Blue PLA PolyLite White Transmission Distance: 5 PLA PolyLite Stone Blue…
A variety of Dishes to match the Planter Pots series I designed. If you scale the Planter Pot, make sure to use the same scale percentage for the Dish too. The corresponding Planter Pot for each Dish can be found in the following table:…
A Multiface Pumpkin, you can change the face with a twist. No support needed. An opening at the bottom of the model allows you to insert an LED Tea Light to glow his eyes and mouth. you can use Tea Light, but never use a real candle!…
Sculpted this model using Nomad Sculpt on iPad. No Support Needed. You can add a hole in the back to fit a magnet, or just use double-face tape or glue, and mount it where you like. To make a magnet hole, use your printer slicer (ie.…
Lapel Pins - The Numbers- Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry,…
Organic Vase - for Vase Mode Printing Nicely matches the Low Poly Roses https://www.printables.com/model/764527-low-poly-rose-vase-mode-print-updated Hope you like and share your make! Happy Printing =)
To know the current time, just pull your mobile camera, scan the watch face (QR Code), and voilà, there is your time =) For best results: Print at 0.2 mm layer height. Print the watch strap using Flex filament (TPU). For the QR Code watch…
Lapel Pins - The Frog- Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
Daffodil Flower Fridge Magnet - Color Change Decorate your fridge or whiteboard with magnetic charms. Recommended print at 0.1 mm layer height. Start with White, then Color change to Yellow at 4.5 mm. Optional: you could add an extra…
Traditional Yemeni Jambiya Dagger with Sheath, V2. The Cover requires support for the curved tip. I used organic support. Dagger may benefit from support too. Using brim helps in print stability. You may also like the other design found…
A Planter Pot designed for Vase Mode printing. For a sturdier print (Thicker Wall), use the following settings: Set the number of perimeters and bottom layer as you like, Set the top layer to "0" (no top layer), Set the infill to "0" (no…
POP-UP a multi-layered hidden message of I Love You to your loved ones, and see their reaction. Print in place with no supports. PETG might be preferable for the durability of the latching mechanism. Hope you like it! Happy Printing :)
Greedy Cup (Pythagorean Cup) is a fun way to explain fluid mechanics. Add liquid below the mark, everything is ok, but exceed the mark, and watch the cup empty itself to the last drop! No Support needed. It's recommended to make the seam…
Flower Shaped Treats Container Fill with candies, and you have a sweet treat for the mouth and the eyes :) You can add a custom message inside, using your slicer, which makes it a nice gift for your loved ones ☺ Can be used as a planter…
Mesh sink strainers tend to clog easily, so I designed this one to reduce the clogging issue and for easy cleaning. It suits kitchen sink drains with 41 mm diameter and 30 mm depth. Print upside down, no support needed. Hope you like and…
Lapel Pins - Saturn - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
Lapel Pins - The Flower - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry,…
Lapel Pins - The Ant - Crocs Clogs Compatible Charms. Easy, fast printing pins. Print the top part with color change , print the pin back button, then add a tiny bit of glue and attach the two parts together, wait for the glue to dry, and…
Inspired by the Nightmare Before Christmas Mayor, you can change the Multiface Mayor face with a twist, to set his mood! No support needed. An opening at the bottom of the model allows you to insert an LED Tea Light to glow his eyes and…
Traditional Yemeni Jambiya Dagger with Voronoi Pattern. The Cover requires support for the curved tip. I used organic support. Dagger may benefit from support too. Using brim helps in print stability. You may also like the other designs…
A Planter Pot designed for Vase Mode printing. This design have small openings for soil breathability. For a sturdier print (Thicker Wall), use the following settings: Set the number of perimeters and bottom layer as you like, Set the top…
Honeywell Home Smart Room Sensor Mount Replacement part for the part that mounts the sensor to the wall. Someone asked me to design this part as a replacement for him. So I might as well share it with you all. Two versions provided: Flat…
Holds laminated signs, with a space to place your logo. The STEP file is provided for easy logo placement. Hope you like it, and Happy Printing :)
Traditional Yemeni Jambiya Dagger with Sheath, Thin design. The Cover requires support for the curved tip. I used organic support. Using brim helps in print stability. You may also like the other design found here…
Traditional Yemeni Jambiya Dagger with Wider Handle Grip. The Cover requires support for the curved tip. I used organic support. Dagger may benefit from support too. Using brim helps in print stability. You may also like the other designs…
This cover is meant to close the Eureka Mignon Fork opening when the fork is removed, to keep the grinder in clean shape. Happy Printing!
I wanted to make a less filament consuming version of my Kitchen Sink Strainer , so I came up with this design, which is so satisfying to watch =) It's not as tough as the other version, but it does the job well! Suits kitchen sink drains…
Unlike my other Jambiya Dagger designs, this version is in one piece and has a keychain hole. Print with Support if printing vertically. Check my other designs here https://www.printables.com/@MrENG/models Hope you like and share your…
Funnel for MOAB Coffee Beans. When filling the MOAB , some coffee beans may escape their grinding destiny. So I revisited my old designs, and modified this funnel to make it suitable for the MOAB system. Now my coffee beans have no choice…
Simple IKEA Motion Sensor holder to place on staircase using zip ties. Happy Printing!
Kitchen Sink Strainer with detachable blades. Easy Clean, Easy Print, and Easy Assembly! After designing my other sink strainers, I wanted to design one with much easier way to clean, so I came up with this strainer. Note: Designed for 40…
Kids Art Gallery - The Bird - Color Change Filament Painting Print at 0.1 mm Layer Height, Change color as follows: Color Change at Layer Height (mm) Light Gray Start - 1 Red or Ping 1.1 - 1.4 White 1.5 - 1.8 Yellow 1.9 - 2 Black 2.1 -…
Kids Art Gallery - The Rabbit - Color Change Filament Painting Print at 0.1 mm Layer Height, Change color as follows: Color Change at Layer Height (mm) Yellow Start - 1 White 1.1 - 1.4 Pink 1.5 - 1.8 Black 1.9 - 2 Note: If you want to…
Kids Art Gallery - The Bear - Color Change Filament Painting Print at 0.1 mm Layer Height, Change color as follows: Color Change at Layer Height (mm) Cyan Start - 1 Brown 1.1 - 1.4 White 1.5 - 1.8 Black 1.9 - 2 Note: If you want to…
Kids Art Gallery - The Happy Bear - Color Change Filament Painting Print at 0.1 mm Layer Height, Change color as follows: Color Change at Layer Height (mm) Cyan Start - 1 Brown 1.1 - 1.4 White 1.5 - 1.8 Black 1.9 - 2 Note: If you want to…
Kids Art Gallery - The Fox - Color Change Filament Painting Print at 0.1 mm Layer Height, Change color as follows: Color Change at Layer Height (mm) Gray Start - 1 Orange 1.1 - 1.4 White 1.5 - 1.8 Black 1.9 - 2 Note: If you want to…
Kids Art Gallery - The Owl- Color Change Filament Painting Print at 0.1 mm Layer Height, Change color as follows: Color Change at Layer Height (mm) Light Gray Start - 1 Yellow 1.1 - 1.4 White 1.5 - 1.8 Black 1.9 - 2 Note: If you want to…
These are all currently available results.
![Low Poly Rose - Vase Mode Print [Updated!]](https://media.printables.com/media/prints/764527/images/5955426_67cdaf14-8e4c-404a-b2fe-3cdc0ab618bd_fcb92255-45bb-4088-9dc5-013d3f05d97b/img_9378.jpg)
![Low Poly Rose Stem [Updated!]](https://media.printables.com/media/prints/764540/images/5955645_6671c6b0-6f98-4dc4-b259-90ef9a3ccab4_c5e45b8b-5ba3-464e-8cc6-202988a6853b/img_9388.jpg)
![Screw Fridge Magnet [Updated!]](https://media.printables.com/media/prints/805421/images/6232500_a192ecd1-9f1f-4ad3-8647-45fe8515abbf_abe0d61b-b84c-4564-ae9c-0c39bcf17777/img_9667.jpg)
