Counting matching models…
This is a Remix of the great "Paste Pusher Animals" by makeplace and my own "Toothless-cookie-cutter" It was kinda requested by marianok . Thanks for the inspiration ;) Use the "smaller" Version. It fits 4cm wide tubes Let me know if…
I used the Twisted Spiral Horn Generator from ricswika These are the settings I used to generate it: Resolution: 50 length: 80 spiralR: 15 startR: 17 endR: 4 rotations: 1 segments: 61 I added a slot for a 20mm velcro strap. I bought it…
This is a basic moddeled Toothless-Cookie-Cutter :) Have fun Please let me know if something won't work. V1.01: -added V1: smaller but higher cuts You can try the gingerbread dough recipie: http://www.thingiverse.com/thing:1874585 Good…
This coverplug goes on a standard "Gardena-connector". I use it to cover the plug which I use to fill my Watertank. Since importing into Fusion360 and changing the model didn't quite work I redesigned it from scratch. So technical it's…
This is V2 of my Headset-Horns. Now you can switch between Headset mode (with velcro band) and Headband-mode (see headband model). You might have to scale the headband-connector to something between 102 and 104 percent.
I redesigned the ears to fit a 20mm velcro strap through them Other than that, the original design is wonderful!
This is a X-mas remix of my Poop-Emoji-Cooki cutter. check out the original https://www.printables.com/de/model/197796-poop-emoji-cookie-cutter and the gingerbread-recipe I used:…
Finally you can eat poop! :) Print it and make some awesome poop-cookies. Either use simple cookie dough or use some gingerbread-dough. You can find the gingerbread-dough recipe here: http://www.thingiverse.com/thing:1874585 I made two…
Have you ever pulled to strong in your waistband cord or hoodie cord? This is a basic waistband threader. For threading your cord into the waistband or your hoodie. I still have to figure out how to effectively get the cord hold onto the…
Since the key for the Westfalia detachable towbar can't be hang on a keychain this ring will do the job. Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0,15…
With this sleeve it's easier to tell apart multiple similar keys. I added a cat-paw version for extra fluffyness ;) No supports needed. Feel free to add your own design or ask me for a design :)
This lampshade replaces the original glass STEINEL L 585 lampshade. Perfect for Halloween. I printed it using “Glow in the dark” filament for the Eyes. Print settings: Support: touching bed Layerh.: 0.25mm I glued the top and the eyes…
This combination of a hammerheadscrew and nut let's you fix hooks into the extrusion profiles of your greenhouse. That way you can tie lines to support e.g. tomato plants which like to “climb”.
This is a remake of a sink plug hair sieve. It is slightly smaller in diameter than the original one. That's because the original one didn't fit. Category: Bathroom
Cookie Cutter for a Gingerbread-house that sits on a teacup. Recipe for the gingerbread recipe is down in the "Custom Section" DO NOT USE ANY TOXIC GLUE IF YOU WANT TO EAT THEM! Maybe I'll design some sort of holder for easier "gluing" in…
This is a Remix of https://www.thingiverse.com/thing:49263 I love the animal paste pusher so I decided to remix it and make a Xmas version:-D Since my family and friends like the X-Mas Edition of my Poop-Emoji Cookie Cutter I added a bit…
This is just a simple hook. The logo is the “multi-use-bottle” deposit sign. No support needed.
V1.01 Added a Lid to slide onto it. A Cable-Holder for the Deltaprintr. It clips on the aluminium extrusion. I remixed it from the "DeltaPrintr SD Card Adaptor Holder" by Costfu Works good in combination with a strud clamp either…
With this stamp you can design your own templates. Outer diameter should be ~ ø35mm The design should not exceed ø33mm The Thickness of the inlay (round) ~2mm Design to stamp should be at least 5mm height Stamp inlays should be made of…
These feet are a repair for my sportsbag. Uses very little filament and prints quiet fast. Since the orignal feet were screwed on I reused the screws. Best fitting screw would be ø 3mm length: 10mm (inclusive head)
V1.01 added the hole that ian99rt remixed, now also customizable with "hole = on/off" and "holedia" as the ø of the hole This little fixture should prevent the Hotend from moving out of the Platform. It should fix "shifting prints" as…
Screwlibary from syvwlch http://www.thingiverse.com/syvwlch/about !!! This is a remix of my original Extruder Upper Block wich was made with Fusion 360 and had metric pipe threads This time I used OpenScad It's my first OpenScad design…
Customized version of http://www.thingiverse.com/thing:1378695 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1378695 Instructions Using the following options: Pitch = 5 Pulley_Height = 2.5…
Extruder upper Block for Deltaprintr. This block replaces the original wooden upper part of the extruder on the Deltaprintr. You may have to drill the holes with a 3mm drill so the filament and the screws fit. But don't drill the lower…
This is a Strud-clamp for the Deltaprintr. Usefull as cable-management. I reuploaded the clamp as a .stl file since some problems experienced with the dimensions. See the pictures for the dimensions. I printed it at 50mm/s 100%infill Also…
These are all currently available results.
