All models

ga25-370 Gear Motor W Encoder STEP + STL FILE

Useful to model off of, not perfect but is dimensionally accurate.

GA12-N20 Gear Motor + Encoder STEP + STL FILE

Doesn't include electrical tracing, and some of the internal gear details but is dimensionally accurate so a good reference to work with for modeling.

Chapstick Holder Fidget

Fits a start sized chapstick and is best printed in TPU with high infill. There is an additional file which has a keyring on the top lid. Model in picture on left 120% scale on right 100% scale There is a 120% scale in the files, this one…

TPU Case - Fits IPhone 13 and 14 + STEP FILE

Printed in Overture 95A TPU - Grey 100% infill, 6 wall, very flexible and durable. Around 40-60 grams of filament so costs less than a dollar Went through a couple different trials getting the fit right. Weaker than a nice otter box but…

Floor Jack TPU Pads - 6 Designs!

Print came out great and fits, will be tested on a car soon! No supports needed! Make sure the pattern side (circular, knurling, etc…) is face down on the build plate. All of the models are set up this same way including the pinch weld…

Dog TPU Ring Toy - German Shepard Approved

Model shown was in Overture 95A TPU with 100% infill Took about 16 hours at 20 mm/s with a Creality K1 ~110 grams of filament (at 100% infill) Will update with time how it holds up from my dogs abuse. Update - Its been a couple weeks and…

Creality K1 X-Y Belt Tensioning Distance Tool

150 mm in length to properly space the idler pulleys when checking belt tension.

Ford Blend Door Actuator Gears

Note----------------------------- Only files for two final gears as shown. Tested and Fits, tolerances with gears are tight I advise running through the holes in the gear with a slightly oversized drill bit to ensure they are round. Has…

V2 UPDATE IN PROGRESS - Storage Case with Tattoo Gun Kit and Blank Inserts

STEP BY STEP INSTRUCTIONS IN A PDF IN FILES!! (I put a lot of time into them so plz use!) note: not fully tested due waiting for filament to come! Bill of Materials ------------------------------------------------------------- 10 -…

Brother Sewing Machine Repair Parts

10 min print no support Fits brother sewing machine Printed in Inland Clear PETG Model shown in photo JX2517 but may fit other models as well

DHT11 Temperature and Humidity Sensor Case - STEP + STL FILE

Assembly Instructions All of the parts are shown above along with three dupont wires The top must be attached to the bottom case - I used super glue Once they are glued the sensor can be slid in The wires can be connected before or after…

Scraper

Slow Feeder Insert for Bowl (6 inch dia)

A slow feeder down bowl insert - 150mm diameter (~6 inch)

Box Fan Replacment Feet

Fits a standard box fan, just simple place the width of the box fan in the gap between the feet. Can attach using glue or by drilling two holes and attaching with fasteners.

Valentine's Octopuses

Two adorable octopuses that make the perfect valentines day present!

Creality K1 Filament Drier Side Mount

Designed for the Creality Single Roll Space Pi Dehumidifier. Shown model is printed in black Creality CR PETG 30% infill, 3 walls I advise ABS, ASA or PETG at a minimum due to chamber temps or rather any high temp filament! Bill of…

2008-2026 Ford Windshield Wiper Arm Cover Replacement Cap

I made this replacement for my 2011 Ford Taurus wiper as it has been missing for a while and this is the perfect application for additive manufacturing. Note: Place the part sideways on the bed and use tree supports. - Make sure to set…

FD Rx7 Sillouette

FD Rx7 Silhouette model I made for a class and repurposed later into an Christmas ornament. roughly 5 ½ / 6 inches long The model shown is laser cut but can be 3d printed as well I recommend a 0.4 nozzle and fine settings for some of the…

Octopus Buddies

V2 - The upper octopus has the arms closer to the lower octopus’s head for less supports

Brake Caliper Piston Compressor 3/8 and 1/2 inch Ratchet Attachment

Hasn't been used yet, will update soon but should be plenty strong for the application. Printed in PETG : Ideally should be ASA or similar Suggested Print Settings : 30% Infill, 5 Walls Two models below 3/8 inch model ½ inch model Should…

Creality K1 Rear Ventillation System Add-on

Description isn't finished but I will add assembly instructions but its pretty straight forward. Bill of Materials---------------------------- Required ---------- 4 x M3 diameter machine screws 4 x M3 diameter heat inserts. optional…

DO NOT PRINT - FIXES IN PROGRESS - Reusable Dust Bag Fits Eufy L50/L60 SES and Various Other Models

DO NOT PRINT - FIXES IN PROGRESS Slight design change from photos and instructions, new design the front face and slider panel twist together No additional hardware necessary Fits Models Eufy L50 SES and L60 SES Congo 10000, 8090 Ultra…

Brake Caliper Piston Compressor Handle Attachment

Tested works great in PETG Printed in PETG : Ideally should be ASA or similar Suggested Print Settings : 30% Infill, 5 Walls I have another model where a 3/8 or ½ inch drive ratchet can be added/used to turn the brake compressor rather…

Molecule Shelf - update coming

Background/ Info Model I made for some friends to hold their rave objects and bracelets! Model can be scaled to any size, and the angle will not change on the hooks so they can be scaled separately as well! No supports needed! Attach…

ECAS04 Bowden Tube Coupler Mounts

Mount is for “ECAS04 Bowden/PTFE Tube Coupler” by @jphalip Allows for the coupler to be placed anywhere on a Creality K1 using existing screws, holding the coupler in a single spot! (M3) Link to the Part Below!…

Boyden Tube Bracket

8 inch Aquarium/Terrarium LED Cover

200 mm or 8 inches wide. The outer edge grabs onto the walls of the tank so simple set in place. Just simple place on top of a suction mounted aquarium led strip. Helps to stop the LEDs blinding you when you look at the tank. Print…

Plant Squirt Bottle Replacment

A squirt bottle replacement Outer thread diameter of 23 mm Recommend 3-4 outer layers to ensure no leaking. Top came off of small squirt bottle.

Fidget Lighter Sweater and Sleeve

Print in TPU 8% Infill (Cross Pattern) 3 walls 20 mm/s

Scalable Hole Tolerence Tester

Initial diameter is 5-5.3 mm At 100% scale holes are 3mm deep +/- 20% scale = 1mm in diameter e.g 120% scale = 6mm 140% scale = 7 mm 20% = 1mm 40% = 2mm 60% = 3mm 80% = 4mm 100% = 5mm 120% = 6mm 140% = 7mm and so on………………

Octopus Buddies Mold Set

Included are STL and Step files for a silicon mold maker to reuse old filament and an additional mold to create a silicon octopus buddy Can be scaled to whatever size!

Lightning Port/ Charger- Painting Customization Jig

5 Bit 1/4 Hex Magnetic Holder

A simple 5 spot 1/4 Hex Holder with spots for sheet magnets

Speedshape Wall Mount Brackets

Mount A is glued inside the back of the speed shape and Mount B is attached to a stud in the wall.

Desk Workspace Station

Inserts - TPU Body - PETG Will need to slice inserts stl file on plate No support needed!

Small Space HVAC Actuator Tool

8mm socket on the end. Hypothetically you can scale it up and down for other sizes as well. Works for all Ford, Mercury, Lincoln 2008-2011 HVAC actuator screws. Two designs but the short one worked the best for me. In the 2nd picture from…

Vertical phone mount

Pretty niche but hey maybe someone will find it useful for them. Specific car is a 2011 Ford Taurus - Not the Sony system should probably fit some other cars in that year range, like 2009-2012 cars with Microsoft Sync like that. – Maybe…

Wire / Test Lead Hanging Rack

two slots 50 mm apart for wall hanging located on back of hanger 200 mm wide 5 - 5mm gaps 4 - 4 mm gaps Print in this orientation for best results

Aqeon Quiet Flow Fishtank Filter Motor Bushing

A replacement for the small rubber bushing that goes on the motor shaft of a Aqeon Quiet Flow Fishtank Filter