Counting matching models…
I spent a day designing something around a flawed model of a linear bearing that I found online and I can't seem to find an actual source for linear bearing models that isn't in .CAD format, so I mocked these STLs up according to the…
For some reason BTT didn't put mounting holes in the model for the 3D step file for their SKR Mini E3 V2.0 (but they did put them in the schematics). I have converted their STEP to an STL and added the holes in the correct locations so it…
So I upgraded my ANET A4 to a 32-bit SKR v1.3 , 0.9 degree steppers, optical endstops and changed the original power-supply to 24v, and was wondering what to do with the extra parts so I decided to make a Core XY. So here is what you…
Got my Pineberry M.2 HatDrive Bottom today and couldn't find a case for it and my Raspberry Pi 5 so I hacked this one together. It holds without screws, but it's pretty thin, so don't expect to be able to pull it in and out too many times…
So I wanted a stand that took up less space on my counter, couldn't find one, so I modified one by elfie2002. His design used very little filament so it was perfect. I have only printed the non-lite version with no supports in PETG, so if…
I've seen this concept as a cardboard and tinfoil craft before, just thought it might be nice as a 3D-Printed version. I made it from scratch in TinkerCAD. https://www.tinkercad.com/things/i5AELgmv15r-die-hard-ornament/ I have included…
This is a 3D-printable stand for the original Nintendo Wii with a dedicated slot to hold a WD 2TB My Passport Portable Hard Drive (WDBWML0020BGY-WESN). It’s a remix of the design linked below, but updated with: A hard drive parking…
This project is a remix of Zack Freedman's Chromance. Key enhancements include: Optimized Part Design: All parts are designed to be support-free, featuring built-in supports suitable for a 0.6 nozzle. Supports can be easily removed with…
Remixed for an ANET A4 that has 25mm effector offset (but 50mm between diagonal rods) and with BLTouch v3 support from kirill91's great design (which was 40mm between the rods). This allows the stock carriage slides to be used. You don't…
I have downloaded various other versions of this model and some things were wrong namely the size and height of the pot and the length of the reset button. This model has those corrected so cases can be made to fit this model more…
This is the missing lower piece to a 70m Nexus fan mod for the OG Xbox. It goes at the bottom and fills in the 2 holes, then the other mount holds the fan over it. The 70mm Nexus fan mod is here:…
A redesign of a vertical drawbot so that there is no need for side weights. Currently I use the Makelangelo software and firmware by www.marginallyclever.com on an Arduino Mega 2560 R3 and RAMPS 1.4 Controller with an LCD 2004 screen. My…
I liked Johnnier02's design, but wanted to be able to use my phone in its Otterbox case, I also wanted to be able to print it without supports. Things modified from the original: Wider. Front Lip shorter and deeper. No cord holes going…
This cartridge design by jaystonian more closely matches a ColecoVision cartridge, so I modified it to hold the wonderful PiColeco by A. Ottaviani. ( https://github.com/aotta/PiCOLECO ) It has a Pico reset button where the "o" in Coleco…
A mock-up of a SD35VC0 (SD to IDE Adapter), done with calipers so enclosure designs could be made off of it. It's not for printing, it's for designing an enclosure like in the example photos. Made in TinkerCAD.…
I was looking for a stand for my phone, a Samsung Galaxy Note 9 that could hold my old Samsung EP-PG900IBE square charger that I had laying around and I found david4974's old S6 one and used TinkerCAD to modify it. I exploded it into…
The one from 2024 by Uski was too big for my 210, so this is a modified version. It took a few tries to get it right, and since the size of the printed power button hole can vary depending on your printer, I’ve included 4 versions with…
Westinghouse H816L5 Clock Spotify Conversion Basically, If you own a 1960s Westinghouse H816L5 and want to install a RPI4 in it without chopping it up too much to use Spotify, this is for you. Or if you need to reprint a missing piece,…
Atari CX-10 Joystick Button Alignment Jig After countless tries at aligning the new domes for my vintage Atari joysticks I gave up on eyeballing them and designed this simple two-piece jig. It lines up all five triangle-dome buttons the…
This is a remix of InsaneDruid's Sega Saturn Rhea/Phoebe Cover, but made for a micro SD "Micro SD Card Extension Cable PinQiongZhe" in a Sega Saturn VA0 model MK-8000. https://www.amazon.com/dp/B0D116KQZZ Print the main file of your…
This part is a bed-light lens for a 1976-1982 Plymouth Arrow pickup that is no longer in production and so I made it with calipers from a damaged original in TinkerCAD ( https://www.tinkercad.com/things/2m4Mkd3qS7e-imasen-1189-200 ). It…
Game Gear HiSpeedido LCD Bracket — Shifted (2-part) + Centered (legacy) Remix of: nad_22 — "GameGear Hispeedido LCD Mounting Bracket" Target screen: Older VGA-variant HiSpeedido LCD for Sega Game Gear (see photos) Why this remix? nad_22’s…
I purchased a Turbo Grafx 16 RGB adapter from eBay and none of the cases looked how I wanted them too, so I remixed this together. Needs supports for the overhangs. You should modify the slicer to user just 1 perimeter for the first layer…
ALPS Switch Conversion Plate for Atari CX-10 Convert your Atari CX-10 joystick into an Alps-switch joystick! Choose between two plates: What’s Included CX10_Alps_High.stl — raises switches for instant clicks , but more sloppy (will press…
These are all currently available results.
