Counting matching models…
Gunners! Thanks to https://www.printables.com/@TurboPL_2127373 for noticing the error with the original. I made v2 with less color swaps then the original Filament changes to achieve the desired result. Standard coaster size and 7mm…
The Scousers! I mean The Reds! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 4.6 Yellow…
Update: added a holder. 1/6/2025 The Peacocks! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Yellow…
Recommend outdoor material if planning on using outside. I sized this to be what I found online as a standard gnome size and can be printed on a normal sized printer. PLA would work for shaded outdoor areas but why take the chance print…
"Los Blancos" "Los Merengues" "Los Vikingos" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till…
The Magpies! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5.2 Silver 5.4 - 5.6 Light Blue…
The Red Devils! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a…
Updated 12/31/2025 Added 2 styles of holders. Vertical and flat. I printed the vertical and painted some areas black for the soccer ball. The flat version should be fine with the coasters loosely fitting inside. The Lilywhites! or Spurs!…
Remixed to work with the SV06 Plus, used the same head. removed some thickness to get the full X axis back. Tested and works great. Be mindful of the screw length. I did not have M3 x 23 mm screws nor countersunk ones. I had cap heads…
Just a fantastic model by Rikrdoga. I remixed this for a pencil topper. Support will be needed for the face but they are minimal, put a support blocker inside, not needed there. You could try no supports, I have not. This can be printed…
The Citizens! The Sky Blues! Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque,…
The Blues! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I…
Slim Plastic Utensil Dispenser Collection Remixed the original to be a slim solution and with a variety to choose. Single, Double, Triple and Opposing Double. Removed the labels and made the faces the label. This holds 35 spoons and forks…
Fußball-Club Bayern München e. V. coaster or plaque. "Der FCB" "Die Bayern" "Stern des Südens" "Die Roten" "FC Hollywood" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can…
The Hammers! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Yellow till 5.2 White 5.4 - 6 Teal 6.2 -…
for the developer in the family. remixed from this as well https://cults3d.com/en/3d-model/various/hacker-inside
"Barça" or "Blaugrana" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 4.6mm Yellow 4.8 -…
The Citizens! The Sky Blues! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up…
The Tricky Trees! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Red till 5.6 White for the rest
Slice how you want to get the colors you desire. I printed these the way they are oriented with supports on the bottom, .25mm layers but you can slice as you wish, its your time. I printed both regular and silk versions in the photos, I…
Compact All-In-One Plastic Utensil dispenser Remixed the original to be an all in one solution and compact. Removed the labels and made the faces the label as well as recessing the labels into the top. This holds 30 spoons and forks…
The model borrowed elements from this model on Printables, the illusion idea and 1 part was used to remix the portal in my illusion. https://www.printables.com/model/414209-botanical-portal-desk-toy The UFO abduction illusion toy This is…
Wolves! or The Wanderers! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5.6 Orange 5.8 -…
The Villians! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Teal till 3.8 White 4.0 - 5.6 Yellow 5.8…
All the MLS teams as color swap coasters, these are colorful but you can do this without a multicolor printer. PolyTerra recommended, it covers wells. Silks work well too. These can also be sized up for plaques. be mindful of the Z…
The Blues! Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at…
"Lille" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Red till 6mm Blue 6.2 - 6.4 White 6.6 - end
Designed this for .1mm layers, you can use my color bender for assistance with the shading. I included 2 sizes but it can be scaled just be mindful of the Z height. I would keep that at 100% Filaments I used IIIDMAX Black PLA+ Repapper…
The Villains'! A new logo / crest for 2023 and beyond Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque…
The Saints! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5 Light Blue 5.2 - 5.4 Gold 5.6…
EPL! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 6.6 then Blue
This will require supports but I made it easy for you. I added a half circle at the bottom where the opening is, this is by design, its not needed for the model but it does block tree supports with touching buildplate option from filling…
Remixed the original into a bust. I made the base her very large feet that she is embarrassed about, and part of her remaining body, it pops into the bust and is very secure. You may have to deburr and or sand to get it to fit, just a bit…
This will require supports but I made it easy for you. I added a half circle at the bottom where the opening is, this is by design, its not needed for the model but it does block tree supports with touching buildplate option from filling…
Remixed to be able to make it spin and other small fixes or tweaks. It spins well. 2 versions, small is more for a kids hand, large for adults. I use Gloop to put it all together but you can use any glue that works with the material you…
The Red Devils! Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep…
The Toffees! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 4.6 Blue for the rest
Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Red till 5.6mm Blue 5.8 - 6.2 White 6.4 - end
A star wars themed steak knife cutlery holder for up to 8 steak knives. Print with .2mm layers and supports are needed, tree or organic work fine. I have a lot of yellow PLA I got on clearance so pardon the color.
RepRack for NSF shelving low profile Remixed version of "RepRack" filament storage system. Uses 1/2" EMT conduit as the Rack rails of the system. Requires screws to install the clamps that retain the rack rails or use these press on…
I added an arrow to both sides of the cradle and embedded a .2mm depth line in one side of the rocker, makes it easy to center. Get the other pieces from the original Pic in the makes.
“Sang et Or” Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Yellow till 5.4mm Red 5.6 - 5.8 Black 6.0 -…
The Eagles! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 4 Grey 4.2 - 4.8 Red 5.0 - 5.8…
"Le Téfécé" or "Les Violets" or "Les Pitchouns" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Red till…
Easy no support space capsule. Made for small kids as it does not have sharp edges. Designed for the LMShow 2022 Holiday Print Drive at 100% scale its 3 inches tall and 2.5 inch diameter
2 remixes in one bobblehead toy. 2 bases and 2 heads v1 head is more forward looking and v2 is looking up slightly, both print without supports. The bases print without supports too. I included the assembly tool and a modified spring. You…
The Bees! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. This was a difficult one but the result is…
The Cottagers! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5.2 Red 5.4 - 6.2 Black 6.4 - 7
Designed this to be easy to print. .2mm layers and no supports. Don't go too fast there are some overhangs 2 sizes available, small for kids hands. I also put a few drops of Dupont Non-Stick dry film lubricant in-between the sections…
The Cherries! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. White till 5.8 Red 6.0 - 6.4 Black 6.6 - 7
"Les Aiglons" or "Le Gym" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Red till 5.4mm Gold 5.4 - 6…
A print in place (blades only) collapsible Festivus pole-saber. Stands about 38 inches tall when extended and just taller than 8 inches when collapsed. Suggest .2mm layers and if you want to the pole a different color, print the blade(s)…
"Les Merlus" or "Le FCL" or "Les tangos et noirs" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Black…
The Foxes! Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at…
I liked the heart shaped box with the roses, made a few for relatives. Also have a friend that suffers from chronic pain and I made this for her. Its a fusion of a few models on Thingiverse. I made the inserts with resin but can be done…
"Les Phocéens" or "Les Olympiens" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Light Blue or Teal is…
The Foxes! Convex version, letters are raised and top layer. There is a concave version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I…
I made the .44 Magnum revolver and people thought it was real. BuildersMark suggested this and it made sense So I jumped on it right away. This is what I came up with and it should work for most prop guns with a hole in the barrel. No…
A fun out of this world pencil topper that spins. You can also make it multicolor with filament changes at layers. Print with .2mm layers. no supports needed. fits a standard Dixon Ticonderoga number 2 pencil. I hope you enjoy this model.…
"Les Phocéens" or "Les Olympiens" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Black is the highest…
Layered filament change print. 2 sizes but can be scaled, just keep the Z at the same height. Filaments used IIIDMAX black PLA+ - backer and eyes and outlines Reprapper silk white PLA - eyes Kyuubi silk sapphire blue PLA - earrings Iemai…
remixed to use the eraser. .2mm layers, no supports needed. may have to break it free but not much effort to do so. I also put a drop of dupont non-stick dry film lubricant after breaking it free, makes it spin well. Also it easier to put…
Gives it a more spacey feel You can resize if you want. I would keep Z height the same though. I hope you enjoy this model DWTC
"Rouges et blancs" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque White is the highest surface here.…
small desktop palette 2 brush holders 4 colors 2 mixing areas a water hole
The Seagulls! One of the most boring crests in sports. Concave version, letters are sunken. There is a convex version too. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can…
Remix of Simple Twist Open Mushroom (generic) by 3DPrinty Made the bottom to mimic Devil's Tower like in the movie. Print with .2mm layers for the top, I printed the base with .4mm layers with a .6mm nozzle. Top is Pearly Silver from…
a coaster with the old logo that still has football club. change colors where you like but I did this with .3mm layers and changed at 4.2 and 6.3 I hope you enjoy this model DWTC
The Seagulls! One of the most boring crests in sports. Convex version, letters are raised and top layer. Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a…
Are you looking for the perfect mate and trying to save the world at the same time. These are for you! Hope you enjoy them! DWTC
I found this on thingiverse and it sort of worked. I improved it. Print with PETG or better. https://www.thingiverse.com/thing:4717820 I have this running on one of my Ender 3 Pro's, I also have the Micro Swiss version. Will be running…
A fun out of this world pencil topper that spins. You can also make it multicolor with filament changes at layers. used 2 different UFO's and morphed them together. Print with .2mm layers. no supports needed. fits a standard Dixon…
Design for the contest tissue box cover for the square boxes. No supports needed. Print with the any layer size really. I printed it with .4mm layers using a 6mm nozzle, and 4 bottom which it the top. Print top down on the bed. Go slow on…
Inspired by watching makerdeck A star wars death star dradle added a split file so you can print without supports, just glue together. I printed with Ranki Rosewood pla with .2mm and 10% infill. Spins great 2/24/2023 - added V2. There is…
remixed to use the eraser. .2mm layers, no supports needed. may have to break it free but not much effort to do so. I also put a drop of dupont non-stick dry film lubricant after breaking it free, makes it spin well. fits a standard Dixon…
Inspired by my death star dradle. If you work remote and have a lot of meetings, you need this. you will find yourself playing with this more than you should or want, its an addictive little spinner. Top is split into 2 files. there is a…
couldn't find a nickname Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque White till 6.4mm Blue 6.6 - end
3d Print for Blow Pop, Tootsie Pop, and Dum Dums to introduce 3d printing in a fun way to kids for Halloween. Inspired by Builder'sMark not sure its worth a filament change or not. MMU painting would work fine. I did the first color…
"La Paillade" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Grey till 5.2mm Orange 5.4 - 5.8 Blue 6.0…
"Le SCO" or "Les Scoïstes" or "Le Noirs et Blancs" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Gold…
"Rouges et blancs" I messed up the first color on this one but you get the idea. It was late and I was tired, blue black whatever! Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm…
I really liked what W3Dmaker did and had to turn it into a pendant. Can also be a magnet. I use the 20mm square magnets. Wear it out then come home and put it on the fridge, ready for the next outing. Can be scaled but be mindful of the Z…
desk or shelf art for your attorney friends or Twitter jail friends. Recommend .12 layer height on an Ender or .15 on a Prusa. I followed the originals recommendations.
3d Print for Blow Pop, Tootsie Pop, and Dum Dums remixed from this one https://www.thingiverse.com/thing:1827098 I recommend supports.
I liked the idea and made it different. Added my own ufo and alien head, recessed the eyes and no outline for the face since black tpu is used as a base. need to get some glow tpu to make this really pop. used black, orange (translucent…
I remixed this from 2 others on Printables. And included a Fixumdude pot of gold. Hell O'Kitty rules the friendship underworld. Print with .2mm layers Layered for many colors or you can skip some, its up to you. White to 5 Green 5.2 - 5.6…
"ESTAC" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Black till 5.2mm Gold 5.4 - 5.8 White 6.0 - 6.4…
"Les rouges et blancs" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque. Red till 6mm Black 6.2 - end
Pezliz Rocks IRL and now in 3d printing. Careful of the horn hand you could break it. I was ill when all the festivities happened on her birthday, This is my way of making up for it. Printed with .2 layers, change where you want, there is…
"Les Lanciers" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Claret Red till 5.8mm White 6.0 - 6.4…
Modified the original to work with any printer for a top mount solution. 2 versions available depending on your needs Holds the wide Hobbyking spools Forgot to add the bearing dowels earlier, they have been added, sorry. Recommend 3…
"L'ours" Filament changes to achieve the desired result. Standard coaster size and 7mm thick. Printed with .2mm layers. Can be scaled up for a plaque, I would keep Z at 7mm even for a plaque Red till 5.8mm Black 6.0 -6.4 White 6.6 - end
print some of these and you might lose your car for a few days and end up Jennifer Gardner or a years supply of pudding. slice at .2mm layers swap color at 7.6 or 7.8mm
I wanted more than just the flip lid that came with the Empire version. I added the sith holocron imprint. Printed the first one and then said to myself flip it around and use the top of the imprint as an indicator where to push the lid,…
I created this to assist with flat layered models, this will allow you to layer the colors appropriately without too much guess work. I sliced with .1mm layers, with a change at 1.1mm The wheel holds 24 swatches of your choice. Each…
A nice visualizer for any printer. Nothing fancy here, I printed at .2mm you need the magnets from the original and should assemble the same way too. Glue the logo to the trim. I had this as 1 piece but it had issues printing so I split…
its a coaster do you need a description? If you do you probably shouldn't be 3D printing… picture is the logo version, coaster version the P is recessed.
Made this for the contest. It fits many bowls even the frozen ramen bowls, single people know those. Also fits in your pocket or purse. Made with TPU for reasons of many I hope you enjoy this model DWTC
I like things that spin so I created this for fun but it also has a few functions. Stream tool 1 - can't figure out what color to print? Let the wheel decide. Have your viewers choose 6 colors, load them on the wheel and spin! You can…
“The Logo” Pure Reality Other Than Opposing People And Suffering The Anxiety Scale it as you wish, this is a large one. be mindful of Z height.
These are all currently available results.
