Gnome with pickaxe standing on a rock - hollowed
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€16.90 – €20.65 net (excluding VAT)
For file: PI3MK3MK3S gnome_with_pickaxe .2L 202G 21H.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €18.77 excluding VAT (range midpoint).
- Weight reported by the author
- 202 g
- Print time reported by the author
- 21 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Hollowed fillable remix from 2 models, the gnome and rock 4 solid. Will look good in a rock garden? minimal supports.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 100
- Makes
- 1
- Views
- 544
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
This will require supports but I made it easy for you. I added a half circle at the bottom where the opening is, this is by design, its not needed for the model but it does block tree supports with touching buildplate option from filling the inside cavity, some will enter but are easily removed, or you can leave them inside, its up to you. The ones that enter are needed to make the print work.
I added the rock to make the model more upright from the original.
Plus it gives it a cool look, like he is tired from the work on the rock.
Recommend outdoor material if planning on using outside. I sized this to be what I found online as a standard gnome size and can be printed on a normal sized printer.
PLA would work for shaded outdoor areas but why take the chance print in ASA, PETG, or ABS I suppose.
I printed this in Iemai rainbow PETG with a .4mm nozzle at .2mm layers with a .2 initial layer, 3 walls and 5 top and bottom 15% infill with 15% overlap . Makes a strong print.
I recommend filling with sand, or BB's. Less chance of the dog running off with it or it getting blown around the yard.
Scaling - you could scale this, make sure to scale them both, I don't recommend that.