Counting matching models…
1st of many characters I have in the works to release to the 3d printing community. This is my interpretation of a bitcoin miner with a double shovel unearthing some bitcoin. You can print out some bitcoins to put at the base or buy some…
Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.
self designed wallholder for Demineralisation cartridge (Füllix Entsalzungspatronen Wandhalter) large opening, for easy hose fitting and slotted holes, for wall screws... use washers to support screws... Category: Household
"The owl of Minerva spreads its wings only with the falling of the dusk." — G.W.F. Hegel This model is a recreation of the classic "Owl of Minerva," the eternal symbol of wisdom, philosophy, and insight. According to Hegel, wisdom only…
This replacement indicator for the ZN50QT-A type scooter from Minreva (normally also fits Lexmoto Tommy 50 and Znen/Zhongneng models) was impossible to find/source anywhere while I was repairing one. After 20+ hours of measuring,…
This desk holder is designed for the Nano Polymer Adhesive by Vision Miner , keeping the bottle and brush secure, organized, and always within reach . The integrated brush holder prevents mess and keeps your workspace clean. A compact and…
fabric and mineral vase Description (en francais plus bas) This vase is a synthesis of my modeling and texturing work on Blender. Its distinctive feature is its highly detailed texture, made possible by displacement on Blender and…
Hello, simple insert for the game Imeprial Miners. Fits sleeved cards. PRINT INSTRUCTIONS: 3x Imnperial Miners - cards I,II,III 2x Imnperial Miners - cards IV, EVENT+ 1x Imperial Miners - diamonds, cart, machines 1x Imperial Miners -…
Print Settings Material: PETG (Recommended for heat resistance) Infill: 15% Design: Two-piece, support-free printing. Optional Gaskets: TPU (100% infill, 0.6mm / 3 layers thick) for airtight sealing. Required Hardware Screw Type: M4 (or…
The Bitaxe NerdOCTaxe bitcoin miner can be significantly over clocked however the 90mm are not up to the task of moving enough air to keep things cool. Additionally 90mm fans are way too loud, unless you want a sever room vibe in your…
Easy to print TTRPG (DnD) player character of a Dwarf Miner Skeleton. Works well with 0,2 and 0,4 nozzle.
This is the updated version of the 90 to 120 mm fans duct adaptor. A number of people asked if I could make a version of the duct with side vent to cool the voltage regulators. on the Bitaxe NerdOCTaxe bitcoin miner. The miner can be…
Custom slot loaded ESP32 holders that slide into a track module designed to hold 4, 6 and 8 ESP32s. This module is for use with the microRACK homelab setup . This was designed ot experiment with Nerdminer however it's intended for any…
This detailed scale model represents a traditional Roman temple, showcasing the defining features of classical architecture such as a raised podium, a columned portico, and a symmetrical layout. Inspired by temples like the Maison Carrée,…
Simple, tiered stand to hold crystals, gems and rocks. May need supports for the lip on the shelves, print flat on its back. Leave a like and let me know what you think of the model! Visit my page where I sell physical copies of my…
Carcasa para NerdMiner V2 hecha con CNC laser. Vídeo del montaje aquí: https://youtu.be/d1GTmmWhqo0?si=DeRxBZ10xznoTgpG
Used openscad to create the design. You can change the code for other sizes of the compartments. Hinge works by inserting a tiny piece of filament and then glue or melt into place. The transparent part of the lid is with acrylic glass /…
A fan duct for the Bitmain Antminer S21 Pro & S21 XP models with an exhaust diameter of 8 inches / 20 cm. Since these models sport two 140mm fans, the model is quite large. So there is a two part version included, both parts fit on a…
This custom-designed case is perfect for housing the Lilygo TTGO 1.14 inch TFT display, specifically designed for devices running NerdMiner. It provides a snug and secure fit, keeping your components protected while maintaining full…
This custom side panel replaces the original on the Lucky Miner LV07, allowing for the installation of the quiet yet powerful Noctua NF-A6x25 fan. This upgrade involves removing the original fan and mounting the Noctua NF-A6x25 in its…
Podstavec hranatý 40mm pro minerály, acháty (agate and minerals) S okénkem pro popisek
Mineral water holder for Qbrick box by inserting it into the original connector. Printed from PETG material, nozzle 0.4mm, layer 0.2mm, infil 15% gydroid
In the Erzgebirge, mining was practiced for centuries. In winter, when the days were short, miners would sometimes enter the mines before sunrise and not come out until after sunset. For weeks, they wouldn't see the sun. As a result,…
This is a redesigned version from the ground up, inspired by the following model by Schlimmer. https://www.thingiverse.com/thing:5771853 If you want you can also print the following additions or a better visual presentation: Fan Covers…
Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.
This custom stand is designed to stabilize the Lucky Miner, preventing it from tipping over. Its key feature is the use of vibration-damping pads ( link ) to decouple the miner from the surface, ensuring a quieter operation. By reducing…
self designed wallholder for Demineralisation cartridge (Füllix Entsalzungspatronen Wandhalter) large opening, for easy hose fitting and slotted holes, for wall screws... use washers to support screws... Category: Household
Just put some numbers on the box so you can remember the gem values easier.
Damit die komplette frische Luft durch die Grafikkarten gedrückt wird habe ich diesen Outlet Blocker kreiert
Ständer für 2 Nerdminer V2 56 kh/s mit 2.8" Bildschirm Bohrungen für M2 Gewindeeinsätze und Aussparung für Druckschalter hinten Benötigt zusätzlich 8 M2 Gewindeeinsätze zum Einschmelzen und 8 M2x20 Schrauben
My wife does her nails using the Sistaco mineral nail powder system. Her collection of colors is rapidly growing. Each color is a powder in a tiny jar where the actual label sits on the bottom. With her input, I designed these stackable…
A Playmobil scale & style coal miner figure to add to your Playmobil diorama. Reduced print speed to 80% of Max. Does need to be printed with supports for the hands & helmet.
Ständer für 3 Nerdminer T-HMI mit 2.8" Bildschirm Bohrungen für M2 Gewindeeinsätze müssen nach Bedarf gemacht werden (im Slicer oder mit Bohrmaschine) Benötigt zusätzlich M2 Gewindeeinsätze zum Einschmelzen und 8 M2x20 Schrauben nach…
Another housing for the ESP32 development board with a 240*320 pixel display. Suitable for these two boards: ESP32-2432S028R https://de.aliexpress.com/item/1005007774435209.html ESP32-2432S028 2xUSB…
Base part of the stand in various lengths. The 14 or 28 mm wide holders are simply clicked on and can be positioned at the required distances. Labels with usual and special vitamin or mineral names are inserted into the holders and can be…
the device Have a space on the inner side of the bottom part for a 200mm pc fan (i will use an noctua 200X30) and on the under side of the bottom for a filter element at this time the whole thing is still not tested, so you do al your…
Simple wedge base with mounting for a 9015 fan. Getting some airflow over the back of the board helps greatly for managing the heat load. Requires 9 M3 heat set inserts, 4.5x5.7mm size.
This is a case I worked up for the large-screen versions of NerdMiner's. The model files include a case, stand, buttons, and caps for the rear ports. It installs over the acrylic case usually supplied with the NerdMiner. The only other…
Miners house from Alsdorf (Germany). Build in the early 20th century. The model was designed für H0-scale (1:87).
Miners House from the former coalmine Anna in Alsdorf (Germany). The house was built for two families. Bergarbeiterhaus aus einer Siedlung der ehemaligen Grube Anna in Alsdorf (Rheinland). Das Haus war konzipiert für zwei Familien. Die…
Miners House from the former coalmine Anna in Alsdorf (Germany). The house was built for four families. Built in 1880 Bergarbeiterhaus aus einer Siedlung der ehemaligen Grube Anna in Alsdorf (Rheinland). Das Haus war konzipiert für vier…
Our 20 year old cockatiel loves his stone. Often he sits on the same and also likes to sleep there. It should be so. Unfortunately, it was with all the stones so that they no longer hung straight after some time. Therefore: 3D printing to…
Searched for a x4 Case there was no one so I Remixed this one that can fit x4 Nerdminer
Just Something I created to help me learn Texturing and Animating in Blender, figured I might as well share it. (Have Yet to Print)
Well. If You have some esp32 You can make a nice nerdminer cluster. You will only loose 1Wh of energy every hour but… it is worth it :) 3x esp32 and T3S3 Soldered inside +5V and GND all together. There is a slot for 2x 20x2 Magnets to…
🐜 Cartoon Miner Ant Mining has never looked this adorable! This playful cartoon-style model features a hardworking ant equipped for underground adventures. With a round body, expressive eyes, and a tiny shovel in hand, it strikes the…
Armed with a trusty pickaxe and lantern, the Miner Gnome is ready to explore the darkest tunnels in search of hidden treasures. His determined expression, detailed gear, and sturdy stance make him a perfect addition to fantasy villages,…
Ive caught the gridfinity bug, so here is a bin for my favorite high temp glue! Can accept 6x2mm magnets on the bottom if wanted. Nice and simple gridfinity print. Should do fine on almost any FDM printer with no supports. Thanks for…
Antminer S19 / Iceriver KS5 Exhaust Shroud Kit for 8" Duct and 60, 90 & 140mm Extension
Antminer S19 / Iceriver KS5 Shroud for 8" Inline fan
Cooling fans 2x120mm to one pipe of f200mm duct Print in PETG
This is a vase mode print for Minerva Deluxe. Lightweight and fast printing. The largest dimension is 198mm so will fit on most medium bed printers. It must be printed using the vase (spiral) setting at 0.8 extrusion width (on a 0.4…
A replica of the War-hammer carried by Mineralogy student Nagi on her adventures to collect rocks. Assemble around a 24" (609.6mm) long .5" (12.7mm) diameter wooden dowel for strength. Grip is split in two for ease of printing. The two…
A sturdy dwarf miner with a pickaxe resting on his shoulder, standing on rocky ground. One-piece solid figure for 3D printing. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
A dwarf with a pickaxe raised. Solid one-piece design. Model was tested in Orca Slicer for printability. Just scale it up to reach the desired size.
Version adaptée de l'originale afin de pouvoir ranger correctement les jetons en version carton. En effet, dans la version originale de l'auteur, les compartiments étaient trop petits pour tout contenir.
A support to keep the Bobcat Miner 300 upright so that you can also have the antenna on top and allow airflow.A support to keep the Bobcat Miner 300 upright so that you can also have the antenna on top and allow airflow.
Der Zahnbürstenhalter und die benötigten Vorrichtungen wurden während eines Twitch Streams entworfen, modelliert und am Ende auch geformt. Mann kann den einfachen Weg gehen und Ihn einfach drucken oder man baut sich Vorrichtungen, um den…
Full set for efficiently ducting the intake and exhaust air of a Bitmain S21Pro or S21XP and its Power Supply. Files include Universal duct fitting both sides (just flip it over), Adapters for PSU intake and exhaust Features 8 inch / 20cm…
This is an insert / organizer for Imperial Miners, including the expansion ‘Aztecs vs Weirdlings’. It all fits in the base box with no lid lift. It is designed for easy storage and quick setup for games, including easy drawing and…
4 slot solo miner caddy to keep your electronic lottery tickets organized
High flow, low profile Antminer S21+ to 8" inline fan complete ducting set
Simple desktop stand for the One Shot Miner. The miner goes by a few names depending on where you find it. For example here . Very simple model. I chose PETG but anything is probably fine. 15% infill.
A simple desktop stand for your Nerd miner/One shot Miner ESP32 with acrylic housing. This will hold a miner with the following dimensions: 1.5cm Depth x 86cm Length 2.8" Screen version 5 Rig Miner version available here:…
This stand is designed to stack up to 5 miners of the 2.8" version. The cables can be fed trough holes on either the left or right side of the unit and run out the back, keeping it tidy. Prints without supports. Do not print at…
The first Nerdminer is broken, I dropped it and the acrylic glass cracked and didn't provide any real protection. That's why I made a case myself. There are already some, but they were too simple for me. If you have already assembled your…
Simple Soapbox design with bull fender and total security reeling ;-). Print in place with supports!
A quick-to-print, simple, integrated holder for the brush included with the 100ml and 120ml bottles of Vision Miner's Nano Polymer Adhesive. Fits around the lip on the neck of the bottle. The brush holder grips the brush while also…
BOM: 1. 4 nos. FHCS M3x10 2. 4 nos. 8mm anti slip silicone bumper (optional)
Small supports for presenting models or (mineral) stones. I have included a small versions (diameter 4cm) and a large versions (diameter 6cm) and a circular ring (diameter 4cm). Height approx. 2cm.
Small supports for presenting models or (mineral) stones. I have included a small versions (diameter 4cm) and a large versions (diameter 6cm) and a circular ring (diameter 4cm). Height approx. 2cm.
"The owl of Minerva spreads its wings only with the falling of the dusk." — G.W.F. Hegel This model is a recreation of the classic "Owl of Minerva," the eternal symbol of wisdom, philosophy, and insight. According to Hegel, wisdom only…
An Ikea Skadis mount for a Nerd miner/One Shot Miner ESP32 with acrylic housing. This will hold a miner with the following dimensions: 1.5cm Depth x 86cm Length 2.8" Screen version This was made by remixing the desktop stand model below…
This is a case for your ESP32 device. Works only for 2.8" screen version You will need 4 x M3 x 12mm screws. It is designed to work with several different variants of the 2.8" screen version.
I designed this enclosure so that I can mount my Helium hotspot outside. This miner (Finestra) is an “indoor” hotspot, but I bought a 15 cable and 5.8dbi antenna. Printed in PETG (my first successful PETG project) with .4mm nozzle on a…
Lilygo T-display S3 dual holder for Ikea Skadis
This replacement indicator for the ZN50QT-A type scooter from Minreva (normally also fits Lexmoto Tommy 50 and Znen/Zhongneng models) was impossible to find/source anywhere while I was repairing one. After 20+ hours of measuring,…
This replacement indicator for the ZN50QT-A type scooter from Minreva (normally also fits Lexmoto Tommy 50 and Znen/Zhongneng models) was impossible to find/source anywhere while I was repairing one. After 20+ hours of measuring,…
Hi all, this is a vase I made to look similar to, or at least evoke, a Quartz crystal. What really make this vase interesting to me is that it manipulates the FDM process to produce effects. At 0.24mm and higher, the top layers of the…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A stylized 3D-printed figurine inspired by Professor…
