P
Printablesmbiersack
Duct to Window Adapter - 4" to 50mmx300mm
Adapter to vent 4" (100mm) diameter ducting through my window. rectangle side is about 50mmx300mm Category: Tools
- Downloads
- 297
- Likes
- 34
- Rating
- 0
All models
Counting matching models…
P
Printablesmbiersack
Yeti/Ozart Trail / Insulated Mug Handle v2
I needed a simple handle for a friends generic yeti style mug but I didn't like how ( https://www.thingiverse.com/thing:918308 ) needed supports and it ruined the finish on the handle. So I whipped this up in Fusion360 in 15 minutes and…
- Downloads
- 187
- Likes
- 35
- Rating
- 5
P
Printablesmbiersack
Model Paint Storage Tray
The Vallejo model paint kit I bought did not come with a decent storage solution so I decided to try to make one. This was my very first 3D model from scratch and in the end I came up with 3 variations of the design I imagined. The first…
- Downloads
- 182
- Likes
- 34
- Rating
- 5
P
Printablesmbiersack
Plexiglass Mount
Mount for 2mm plexiglass. Plexi wedges into the clip and then use a screw to attach it to whatever Category: Household
- Downloads
- 110
- Likes
- 21
- Rating
- 0
P
Printablesmbiersack
Button Cell to AA Battery Adapter - CR2450 CR2477
Adapter to replace button cells batteries with AA or something similar. I used wire wrapped around the outside and some scrap nickel strip through the middle. I soldiered on a AA battery holder and now my wireless sensors have tons of…
- Downloads
- 86
- Likes
- 28
- Rating
- 5
P
Printablesmbiersack
Ebike battery shelf
Shelf to hold my battery on my ebike. uses Velcro straps to keep it in place. Also made a tray to keep the battery from sloshing around side to side. Category: Electronics
- Downloads
- 74
- Likes
- 24
- Rating
- 0
P
Printablesmbiersack
Curling Broom Push Adapter
adapter to turn curling brooms into a push stick. Category: Sport & Outdoors
- Downloads
- 72
- Likes
- 9
- Rating
- 0
P
Printablesmbiersack
Hinged Plexiglass Holder
A friend needed a hinged holder for a 0.1" sheet of plexiglass. I decided to challenge myself to design a complete holder that could be printed all at once and without the need for supports. Print Settings Printer Brand: Monoprice…
- Downloads
- 51
- Likes
- 16
- Rating
- 0
P
Printablesmbiersack
Chromecast with Google TV Remote Holder - x4 and x5
Needed to organize all the remotes for our Curling Club tvs. I used 3M Command Strips to fix them to the wall Category: Electronics
- Downloads
- 45
- Likes
- 4
- Rating
- 0
P
Printablesmbiersack
Stanchion Clip
replacement clip for a Proline belt with rotating lock. Category: Parts
- Downloads
- 44
- Likes
- 1
- Rating
- 0
P
Printablesmbiersack
Creamer Dispenser
A simple dispenser for the individual coffee creamer cups. I guess this could also dispense all kinds of other things as well... Let me know if you find another use for it. Print Settings Printer: Monoprice Maker Select Plus Rafts: No…
- Downloads
- 39
- Likes
- 9
- Rating
- 0
P
Printablesmbiersack
Anker Battery Belt Clip
This is a belt clip that you can velcro to a battery pack, or anything. I needed something quick to allow me to use my Anker Powercore+ 26800mah battery with my HTC Vive Wireless adapter . This holds on very well to my belt or even…
- Downloads
- 38
- Likes
- 3
- Rating
- 0
P
Printablesmbiersack
Anker Battery Belt Holder
Here is my 2nd attempt at a belt clip for my Anker Powercore+ 26800mah battery when I use it with my HTC Vive Pro Wireless Adapter. This time the clip holds the battery all by itself, no more velcro. I reused the belt clip portion from my…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
Printablesmbiersack
HID 900 Mounting Plate
Replacement backplate for the HID 900 card reader. Standard flush mount. Category: Electronics
- Downloads
- 31
- Likes
- 4
- Rating
- 0
P
Printablesmbiersack
HID 920 Mounting Plate
Standard flush mounting plate for the HID 920 card reader. Category: Electronics
- Downloads
- 30
- Likes
- 2
- Rating
- 0
P
Printablesmbiersack
Stanchion Clip - Round
Replacement end for Proline stanchion belt Category: Tools
- Downloads
- 28
- Likes
- 1
- Rating
- 0
P
Printablesmbiersack
Light Post Cap - 5/8" (16mm)
My dad needed some replacement caps for an outdoor light post. 5/8" (16mm) inside diameter. Category: Outdoor & Garden
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
Printablesmbiersack
Sterilite basket Rails
Rails to hang Sterilite baskets under my cupboards and shelves. Comes in 3 height options. Category: Kitchen & Dining
- Downloads
- 24
- Likes
- 7
- Rating
- 0
P
Printablesmbiersack
Floor Drain Cover - 120mm
Simple cover for the floor drain in my garage. 120mm in diameter and designed to support a car driving over it. Been in use for 2 years with no wear. Category: Replacement Parts
- Downloads
- 22
- Likes
- 6
- Rating
- 0
P
Printablesmbiersack
Bakery Shelf
Needed to fill a space below some cupboards. Designed this 2 level shelf to hold bread, bakery, etc. I used 1/4' wood sheets. Category: Kitchen & Dining
- Downloads
- 18
- Likes
- 7
- Rating
- 0
P
Printablesmbiersack
Cubicle Sign Mount
A coworker needed a simple mount for hanging a sign on the side of a cubicle without poking holes or damaging the cube wall. This mount wedges into the gap between the panels and provides a spot to double-sided tape/glue a sign to. Please…
- Downloads
- 17
- Likes
- 6
- Rating
- 0
P
Printablesmbiersack
Plate and Mug Holder
After attending the first few years of an awesome local Beer and Bacon festival, I noticed that since there was always more people than tables, I was constantly juggling my beer mug, food plate, napkins, phone, etc. I designed this plate…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
Printablesmbiersack
Portable Charging station
Faceplate for my homemade charging station for drone batteries. Supports 24v PSU for at home charging and internal battery for field charging. Uses a ISDT P10 for primary charging, also has a DROK variable PSU for misc. power needs and a…
- Downloads
- 11
- Likes
- 5
- Rating
- 0
P
Printablesmbiersack
Aeon Labs Minimote Wall Mount
Just a simple remix of Brantan's Minimote wall mount. http://www.thingiverse.com/thing:1277518 Print Settings Printer: Monoprice Maker Select Plus Rafts: No Supports: No Resolution: .2 Infill: 20% Notes: Using Hatchbox PLA at 195 degrees…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
Printablesmbiersack
Spacer for Plantronics W440
A friend asked me to prototype a spacer for the USB charging dock for his Plantronics W440 headset . His request was for a simple block with a recessed screw hole that he could then use double sided tape to attach the charging dock. I…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesmbiersack
Cylinder / Tube mount
Mounts for either 1" pipe or 12.9" (327mm) diameter post. We used them to mount 4" square boxes for security cameras and WiFi access point. Has slots to use zip ties or pipe clamps. Category: Tools
- Downloads
- 6
- Likes
- 3
- Rating
- 0
P
Printablesmbiersack
KMC Valve Actuator Bracket
Replacement coupler/bracket for a KMC Valve Actuator. Category: Replacement Parts
- Downloads
- 6
- Likes
- 1
- Rating
- 0
These are all currently available results.