Counting matching models…
Ive designed something to clamp over the existing guard on a bosch 115mm angle grinder then clamp your angle grinder to a bench to sharpen 12mm, 10mm, 8mm, 6mm, 5mm, 4mm drill bits 2x 90mm 8mm bolts & nuts required. mine are my usual CF…
Tamiya TT02 Body shell mounts, I got fed up with the wobbly originals and didnt fancy buying metal ones that will get abuse and likely bent, so designed some that can just reprint when they get broken Required 4x 8mm Countersunk posi head…
I have designed a replacement steering link for the Tamiya TT02 model 42mm length 33.5mm BCD Printed mine in CF Nylon so they last 255'c 75'c 25mm 0.3 100% infill 45 mins in CFN they may need a M3 bolt put into them fully and snapped out…
There are Many of these but ive customised this one to test at my 99% of the time print settings As I always print in PETG at 0.3 I wanted to make a quick level print test so when ive levelled my dual Z steppers i can see quickly that all…
Ive remixed this to hold my Samsung Galaxy Note8 So i imagine that being quite a large phone it will hold alot more different types of mobiles aswell ive printed mine in CF PETG (IEMAI Carbon Fiber PETG) 235'c 80'c 45mm 9hrs will post…
Mellow SHT36-V3 LDO Orbiter 2.5 mount Need 2 20mm m3 standoff 2 m3 insets shallow ones couldnt find one that supported the v3 version so I made this I wanted a velcro strap not zip ties ABS takes about 25 mins @ 300mm 7.5k I have added…
HTC VIVE PRO 2 LINK BOX WALL MOUNT I Needed to mount my Link box behind my monitor on the wall and didnt want to just stick it with DS tape so designed a nice sleeve it fits into snuggly and can be screwed to the wall Mine are my usual CF…
needed a reducer for a cooker hood duct v2 added better version Category: Kitchen & Dining
Yard Broom Head-22mm Connection simple broom head connection for wooden ones, or I use it with 22mm copper pipe instead as Im a tradesman and the flimsy poles you get with a broom these days are useless, and i've snapped a couple wooden…
Kitchen Fitters 18mm Jig For cutting infills and panels, You can buy these at silly prices, why would you with a 3D printer! Printed mine in CF/PETG to last. 235'c 80'c 45mm support everywhere and cut it out once finished. Category: Tools
Ive built myself a Customised Voron 2.4 Ive been using Elecrow screens on all my printers and computers now for sometime since i give up on Waveshare ones having had 2 fail and piss poor after sales!!!! this is my screen…
I wanted a thick wall version of this vase so it will last (my mrs likes flowers! and this vase!) printed a spiralised version already, lasted 2 uses before it leaked so ive remixed it to suite 125mm tall 130mm wide 2.5mm walls top to…
There are a few on here but i didnt want to many flimsy bits on the wall mounts so have designed my own that are a bit more chunky and robust. revised and final single 3.5hrs both together 7hrs mine are currently printing 237'c head 80'c…
Aquacomputer Ultitube 200 D5 reservoir support ring. Ive had Mine now a while, since done a drain down recently to update to a 3080ti and found the rubber one that came with it has perished a fair bit, so have designed a replacement, i…
Corsair (or other 14mm) Hardline Water cooling LED Mount pipe clips For illumination of the pipe work 5mm 12v LED required of choice colour Wiring to a molex plug 12v feed connect to PSU (or other lighting control) Category: Computer
Ive remixed this https://www.thingiverse.com/thing:1619580 thanks to original designer original is to big to print on my Ender 3, I can see others have said its to tight for their headset to, and needs scaling to fit a Pro 2. So ive done…
Vax Airstretch Attachment holder Ive designed an attachment holder that clips onto the fixed rigid upright pipe on the back of the Vacuum and then stops the attachment getting misplaced and lost (By my Mrs!!) I have included a model thats…
ElecGear M2 SSD Noctua 40mm fan mount. I bought a ICY BOX fan cooler for my m.2 a while back what a load of wank it was! So I've been mucking around for the last few months with finding a way to cool my M.2 980 pro better, having made 3-4…
3D Printing tool tidy for the Tent Ive got a huge one on my worktop outside the printer, but have always got a select few tools lyiing around in the tent, so ive designed a small tool tidy for storing them inside the tent. Will hold…
Plant Pot, Cuttings, Seeds Label Sticks, I Used to cut plastic plates up for my seed and plant labels refusing to pay the silly prices for them at garden centres and lollipop sticks dont last. there are some fancy ones here with elaborate…
here are some varying Gridfinity bins with no magnets, I found when looking theres not many without, its pretty easy to go to the site knock these up but hey save someone the bother! mine are all ABS varying print times
Elecrow 1280x800 screen bezel this is quite pacific to what its been created for, I will at somepoint I will open up the inside bezel parameter to fit its own bezel correctly so could be used more widely and post. Ive designed this as…
needs to be scaled in your slicer to 99% glue them in top side down they snap in mirrored and cloned for all wing parts
Simple Wall bracket to hang the Oculus Rift Headset and hand controllers Category: Computer
Ive made a Voron illuminated sign to hang above my printers, Print all bits mine is ABS body cover and ring and PETG Clear blue for diffuser how ive connected mine is the LED strip i have is 24v so ive a supply straight off the printer…
My Draper Tap & Die set didnt come with any storage box So again I made one! Category: Tool Holders & Boxes
Ive designed a simple MVME cooler that slots over my spare PCIE armoured slot to cool the 2 MVME m2 SSD drives beneath the MOBO heatsinks. 2 x4020 Noctua fans or equivalent needed when pc in use my SSD's would sit at 50-55'c idle now sit…
These are all currently available results.
