Counting matching models…
This is a design that allows you to create a customized Perler (aka Hama / melty beads) bead base in Fusion 360. I originally designed this in OpenSCAD but found that it took way too long to render. Fusion 360 allows you to have a…
This is a case for the Heltec Wifi LoRa 32 (V2) development board ( https://heltec.org/project/wifi-lora-32/ ). I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of…
A wrench that you can use for your Hayward CL200 Series Chlorinator, make it's much easier to remove the cap. I printed this with PLA on a printer with a 300mm x 300mm bed. I had to rotate the print 45 degrees to get it to fit the bed. I…
I bought a FYSETC PanelDue clone ( https://www.aliexpress.com/item/4000152814384.html ), and I quickly found out when I received this that "clone" is probably not a great description as it is more like "inspired from". I guess I should…
This is a replacement part for Hayward PVXH011SA. Would recommend using ASA or ABS, and since this is a tall and skinny print, would recommend printing with a brim as well as printing slowly especially as the top part is printing things…
I found that the LM8UU bearings would wobble in the factory pillow block due to their being too much play in the bearings. I created a design that will hold the bearings in place much better and gives a tighter fit and has eliminated the…
This is a model of the battery cover in the HD-Radio RC-P7 remote control. Best way to print this is on its side. You will need to use supports to support the tabs that stick out. There is room for improvement as the bottom has a slight…
The original mount that I designed worked well, but I didn't like the cooling solution that I was using. I've modified the design to allow two 5015 blower fans to be used on each side. The improved cooling makes a huge difference. You'll…
The piece that holds my KDLINKS X1 dash cam to the suction cup mount had broke and my camera fell. Designed this as a replacement part. I have included the Fusion 360 file, along with several other formats that will allow you to customize…
Here's a mount to be able to use the BIQU H2 extruder with the Eryone Thinker SE. There's an option to use this with a cable chain. This is the one I used :…
I ran across a Chimera clone for a very low price and decided to try it out. I have found that the mixing nozzle doesn't mix well for PLA filaments but does work well with translucent PETG filaments. For the times that I want to print…
I designed this to be able to use a piezo probe on the Anycubic Predator. Since the head is close to the heater cartridge, I would recommend printing this in PETG or ABS (or any other material that can withstand high heat). Update 1…
This is an adapter mount to be able to install an SKR board (such as SKR 1.3, SKR 1.4) onto the Robo3D R1. It utilizes the existing holes on the R1. You will want to get a USB cable extension that can be mounted on the side of the…
Here's a mounting block that will allow you to mount the RedLizard hotend to the stock cooling shroud of the Anycubic Kossel printer. You'll need 4 x 2.5mm screws with round head that will screw into the hotend, and you'll need to remove…
These are all currently available results.
