Counting matching models…
Inspired by similar design I made this in 3D studio max using a shape and the loft modifier as it allows detailed control over scaling, rotating etc. I made this to test printing with larger nozzles and have successfully printed it in 100…
This lamp shell is made for LED lamps like Philips Hue that typically works well with frosted glass lamps. It's a work in progress as I would like to make a more stable mount for the lamp socket but as a test it works well. The filament…
more of this https://www.thingiverse.com/thing:2999932 Category: Decor
variation of my other planters this one with more and finer fins so most suited for 0.40mm nozzle unless scaled up https://www.thingiverse.com/thing:2999932 the planters in the image was stopped about 90-94mm as I didn't need them as tall…
This vase is designed to be printed in like-vase-mode but not in actual slicer vase mode. The design is an offshoot of my finned planters https://www.thingiverse.com/thing:2999932 The design is optimized to print on larger printers like…
If you want the machine model to be visible in the interface use this. open the .fff file with notepad or similar and edit the line C:\Users\USERNAME\AppData\Local\Simplify3D\S3D-Software\cr-10 frame-S5.stl so USERNAME is replaced so that…
These are my upgrades for the Creality CR-10 S5 500mm printer. The frame braces and spool holder uses M8 threaded rods and M8 nuts. The spool holder uses two 608 ball bearings The rods must be at least 72 cm long for the two braces and 15…
Adapter for the SKIL 100W multi sander, 280W orbital sander and 300 W Random Orbital Sander to a Miele vacuum hose. The tools use the X-Flow dust collection system but also come with a generic vacuum adapter. But that means using the 40…
Airbrush holder for pressure regulator with 30mm diameter. Should fit most of the inexpensive airbrush compressors
Uses two M3 bolts to hold the microphone. Category: Camera
Use either the 4x plate with the shroud or go all in with the 9pcs frame
Case for one of the inexpensive "class d" amplifiers from ebay Bluetooth 4.0 TPA3116D2 120W x 2 Wireless Audio Receiver Digital Amplifier Board. board is best secured with a drop of hot glue in each corner of the bottom half of the case.…
Uses 2x 25mm long M4 hex bolts and 4x 20mm long M3 hex bolts with matching lock nuts
continuation of this theme https://www.thingiverse.com/thing:2999932 Category: Decor
variation of my other planters this one with more and finer fins so most suited for 0.40mm nozzle unless scaled up https://www.thingiverse.com/thing:2999932 Category: Decor
I made a more open case for my RPI based off 0110-M-P's much used design. I made more room for your fingers to get the SD card out. This one screws together with M3 bolts and comes in two heights to allow for a slim fit or a 15 mm…
variation of my other planters this one with more and finer fins so most suited for 0.40mm nozzle unless scaled up https://www.thingiverse.com/thing:2999932 Category: Decor
Latop holder made for a lenovo 17" laptop to be mounted vertically under a desk
These are all currently available results.
