Counting matching models…
I liked the design of the iPhone Dock which is a remix of, however, when I opened the provided model files I saw it wouldn't be easy to modify the size to fit my Samsung S24 Ultra. Instead of simply messing with the original model I…
Insert to fit between the Flipper Zero and the silicone case to cover the GPIO pins when not in use.
Front cover for Yaesu FT-991/A The scaled stl file is a slightly snug fit the not scaled version is better with foam draft excluder tape to make it a nice snug fit. Fusion 360 file included . if you re-mix it please post as such. Have fun…
I wanted to create a housing for the Peerless by Tymphany PLS-P830984 Speaker to use it next to my Yaesu FT991A. The Yaesu SP10 for 100 bucks seems to be very bad so I researched and bought that speaker. Its an easy box, definitely much…
Ham Operator Sign 0.2mm layer, 2 walls, 15% infill
Having Eufy e330 24/7 cameras takes a toll on the HB3 as the HDD creates a lot of heat constantly writing. Both HDD and HB3 slowly died over a year due to the heat - HDD first and then HB3. My setup is located in the garage, therefore…
My mop bucket broke, would not spin. determined the gear cracked. Didn't want to pay $40 for a new mop bucket. Also didn't want to wait 3 weeks to get a new gear from China. So I decided to learn how to create gears on Fusion 360…and here…
A friend asked if I could design/make an Autism awareness ornament. Depending on your printers tolerance puzzle pieces should press fit, no glue required.
A friend of mine asked me to print the Flipper Zero - Wi-Fi Dev Board Case by CodyTolene, which looks great. He also asked for a cover for the pins. It wasn't until I finished a pin cover design that I read through the case's description…
SD card cover for Flipper Zero with the silicone case. V2 is lower to make the cover stay flat and is rounded to the corners. I recommend using ironing to the top surface. Petg, 1.6, 15 infill
I kept pulling my Flipper from my pocket and the Pogo Pins would get snagged. This is a cover for the Pogo Pins and fits over each pin and eliminates it getting snagged. You must be using the silicone cover for this to work. I printer in…
I purchased a used Yaesu FT-991 from a heavily involved member of our ham radio club that sadly became a silent key last March (2023). The radio was missing the MULTI knob and I said no big deal, I got a 3D printer, I can always make a…
A TPU case for a bit of protection from accidental drops, bangs and so on. // Edit - > 5/30/2024 Changed pictures after re-printing with new parameters listed in the comments for the "TPU case for the UV-S9 Plus"…
Yaesu 991A Microphone holder, mounts to the side of the radio in the two per-existing mount holes, requires 2 M4-0.7 x 10MM screws. 991a-mic-bracket.stl: the mounting bracket with the microphone holder attached bracket.stl: the bracket as…
Given the original files were irretrievably archived by Autodesk during their Fusion 360 downgrade, this will be the last version. THE V5 FILES ARE CURRENT AND HAVE CORRECTED DIMENSIONS The "Fancy" version has some nice chamfers and…
A bracket for the Eufy HomeBase 3 (S380). The bracket provides a wall clearance of approx. 5 cm so that the HomeBase's built-in antennas have sufficient space. There are ventilation slots at the bottom and rear and sufficient space for…
This is a remix from https://www.printables.com/model/196956-gundam-runner-holderorganiser Just added A-I letter for each channel and place in front Runner Holder. I did mine in silk 4 color pla + . Printed with 4 perimeters 5 infill at…
This are feet for the Yaesu FT-991A transceiver. I needed I slightly higher angle then the holder which came with the radio could provide Update: I realized I forgot to mirror one of the feet in the pair file. This mistake is corrected in…
This Castor Support allows owners of the P.I.T. mini toolbox to add ½" castors to the bottom toolbox. The castors can be purchased off Amazon P/N JL-05SR https://amzn.to/4em5wGq Two supports required for the application. I used the double…
My Google Home Hub Max sits in my kitchen next to my sink, where it occasionally is exposed to water on the base. I created this hub stand that lifts it from the counter and tips it forward slightly. I'm new to designing but eventually I…
Using the TH-D72A antenna spacer as a concept this bushing was created in Fusion360 for the Kenwood TH-74A with a Diamond SRH320A tri-band antenna. The bushing fills the empty space around the Diamond antenna and likely provides a level…
As a safety captain, I sometimes feel as though the individuals in the shop are not fully aware of the dangerous capabilities of the heavy machinery we operate to make our components. Have you had this same issue? Well look no further…
The sequre s99 s60 and s20 needed some type of grip. I only have the s99 I'm hoping it fits the s60 and s20 they look the same. Can someone please confirm the s60 or s20. THANK YOU I printed it in PETG at 1.5 mm at 5 infill and 3…
This soldering iron tip protection will allow you to safely store and carry the soldering iron around. I only have the s99 I'm hoping it fits the s60 and s20 they look the same. Can someone please confirm the s60 or s20. THANK YOU I…
This is a 185mm leg extension for Core One users. For the Ikea lacktable : https://www.ikea.com/us/en/p/lack-side-table-black-brown-80104268/ Give you 1 ½ inch of clearance to add a light if you like. Printed in PLA , 15% infill, 3.0…
Microphone holder for the Yaesu MD-1 desk Mic. May also fit on other Yeasu microphone models.
Kensgrove Home Decorator Collection 72 or 64 inch ceiling fan from Home Depot. Came with giant remote control but no wall bracket. Remixed a close match for this perfect fit. I printed it standing up with rafts.
Holder for Kenwood TH-D74 handheld ham radio designed to attach to a RAM mount to allow mounting on handlebars, dashboard, windshield, etc. Requires a RAM diamond base like this one: https://www.rammount.com/part/RAP-B-238U And, of…
stl-ft2d_knob Replacement knob for Yaesu FT2D My knob broke so I decided to try to replicate it. Turned out pretty good. Turns out its pretty common for these knobs to break off. Here is the link to the source code if you want to modify…
I recommend printing with a .2mm nozzle at .14mm layer height. The best sheet magnets I have found to use with this model is Marietta Magnetics brand 30mil (with adhesive).
This knob model is almost identical, to the original, as you can see in one of the photos. This knob is designed for the YAESU FRG-9600 UHF/VHF radio receiver. In the ’80s, it was one of the best receivers in its category, and it still…
This is a wall mount for the Wii controllers for the epic mickey games. A Mickey paintbrush and oswald's clicker Mickey paintbrush and oswald's clicker mount. This is the setting I used. 2.0mm layer high Sunlu Petg Supports YES 15% infill…
This is a clip on pad for the tuning dial of a Yaesu FT-450D. It was designed it during the 2020 ARRL Phone Sweepstakes to help with tuning around. This will fit radio dials that are 35mm in diameter. I used PETG for outdoor use but you…
These are all currently available results.
