31 models
No magnets: With magnets: Print in place. No supports required. I recommend PLA and 0.2 layer height. For the magnet version: Use 5x1mm with the thin cover, 6x3mm with the thick cover. UPDATE : You can print the magnet version in two…
This print requires eight 6x3mm magnets. The smaller version only needs four magnets. (The picture shows the prototype. I noticed that at this size more magnets are better) You must have excellent bed adhesion for this print or it is…
I was looking for a way to reduce vibrations on the Neptune 3 Plus and by looking at designs for other printers, I came up with this version. As I did not come up with this entirely myself, I have tagged this as a remix of another design…
Print in place. No supports required. I recommend PLA and 0.2 layer height. Use 5x1mm magnets for the thin cover, 6x3mm for the thick Cover. Need another magnet size? Leave a comment. Update: There is a latch version now. If it doesn't…
I got my inspiration from JustBaselmans thinking “Huh, what if I could turn that with a crank?" This was an educational project to me as I'm still learning the ins and outs of Onshape. It's not elegant, it's far from perfect, but I made…
It's a square box with an inner size of 12.4cm which is ideal for tissues by “dm”. You need another size? Leave it in the comments and I'll provide it ASAP. But the model should be scaleable to some degree (the lid might become a bit…
No supports needed. PETG recommended but PLA works fine. There are two versions. All parts are compatible with each other except for container B. It only works with holder B. Use the beach cup holder with or without the container or use…
Print in place. No supports required. I recommend PLA and 0.2 layer height. For the magnet version: Use 5x1mm with the thin cover, 6x3mm with the thick cover. Remix of my dice book: Dice Book
My beta testers really liked the toy, but the grid didn't have a chance. Next step: Glue it to the stand. Printable without supports. The tube is open on one side so you can easily put in the treats. The other side is closed for better…
I have way too many fountain pens. I like to have them on the desk and now I have a way to safe some space. There are different versions you can print.
I have seen various couch snack bars online, but none fit my need. This is why I built this modular version, which uses IKEA metal containers to keep it food-safe. All parts are connected by using dovetails. These are the IKEA products I…
A friend told me about cash organizers so I got some inspiration on TikTok and Thingiverse and created my own version of this idea. You've got no clue what I'm talking about? You can look it up under budgeteering (= fancy word for…
Just a simple little palette with a brush holder for small painting projects. Stackable for easy use and storage.
Update 5th March 2023: I messed up the hinge's tolerances at first. I re-organised the files and added more information to ensure that you won't have problems with that. (and I know that ‘tolerance’ is probably not the right word here……
I designed this box for my IT classes in school. I chose this size as there can be up to 30 students in my class. You can put the USB caps into the drawer for safe-keeping. I've also uploaded a version without numbers.
Printed in Eryone TPU which has a 95A Shore hardness. It should work even better with a slightly softer TPU. Printed without supports.
I needed a replacement part for my flip chart so I designed one which works well for 3d printers.
I wanted something useful for my spell cards by Gale Force 9. This is the result. You can add as many spell card holders as you need for your cards and see all the relevant information on first glance. Print in place. Use 3 perimeters.…
Multi-colour as well as single-colour print A typical tower consists of 54 pieces. You can print the pieces in single-colour or multi-colour. I recommend printing the pieces with 50-60% infill so they are easier to play with. After…
Build your own little lantern for a tealight. Fits any common LED tealight (3.8cm). Print four side panels of your choice. There is also a blank version you can use for your own ideas. Settings for the panels start with white filament;…
Mix and match your own combinations of trays and boxes of different sizes. Parts of one organiser : shell (vase mode) insert (vase mode) opaque layer magnet holder 5mm (or smaller) neodym sphere magnets (square: 8 magnets; rectangular: 12…
This model is based on Brent's Treasure Chest . I needed a version that had stronger hinges and could be printed without supports , so I created my own version from the ground up. I printed it with a 0.6 nozzle at a 0.25 layer height and…
I wanted something functional but easy to store away. It uses about 20g of filament. Just bend the middle part up, click it into place and use it as a book end for small and medium-sized books. It's sturdier than it looks. I recommend 0.2…
Plant a tree in your Bulbasaur planter. Just glue the tree to the planter (but it still holds without glue - don't move it too much then). You can find the planter here:…
This is a recreation of the game Wall Go from Netflix's game show The Devil’s Plan . I haven't seen the episode yet, but a friend wanted to play the game, and it looked to be a lot of fun. After some research, I decided to make a version…
I took the photo in a way so you can easily ignore the names on the bottles. Those are the ones for 2023! I wanted a display for my new inks and this is the result. Prints without supports but you should make sure that the print sticks to…
Print with or without the lid. Glue the lid parts together. The top part of the lid prints almost perfectly without supports but you can add some to make sure it works for your printer.
This design uses 5mm neodym sphere magnets in all four corners. Create a photo stand or display the photos on the fridge. Print the upper and lower frame separately, put the magnets in and just slide the pieces into each other when…
Arrange the tray the way you need it. New inlays incoming soon :)
Sometimes I love to transport some joghurt and then put some nuts and dried fruits in it. This box helps you to keep both separated until you eat. Or you can just transport other things in the box. The boxes are sized to different…
One quick and easy way to teach kids the basics of the binary system is by using cards they can flip over. It's something that is recommended in our curriculum but instead of paper cards I wanted to use my 3d printer and give every…
These are all currently available results.
![Beach Cup Holder [no supports]](https://media.printables.com/media/prints/954464/images/7294852_c56c22a2-9f0a-4948-b1a5-4c26bbe7b936_f5e491f0-2e7a-4a8c-8928-97ab4cefa5d0/img-20240728-wa0058.jpg)
