Counting matching models…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
Just a bike. Print Settings Rafts: No Supports: No Notes: The smaller, the slower :) Category: Hobby
This is a prefilter for the Xtool f1 Ultra. You need 8x 10x2 Magnets (10x3 will fit too) and a piece of exhaust hood filter or similar. Fit the magnets in he holes on the base and the top then push the base into position. Cut the filter…
Upgraded to can toolhead and liked this cover. Had to remix it for the PG7. Print the backplate and the logo (accent color). The logo parts should pushfit the slots in the backplate. Print the grill from here:…
The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X…
Baseplate for the Xtool F1 Ultra. BOM: 45x 6x3 Magnets 4x 8mm M4 FHCS Screws There are 3 Versions: Big with the lip on the back. Big without the lip on the back. Small for Bambu Printers (shortened at the back). If you are able to print…
Print two. Screw them down with 4 screws.
I used this 10" ringlight from Amazon: https://www.amazon.de/dp/B07Q3471S2?psc=1&ref=ppx_yo2ov_dt_b_product_details With the riglight you will also get an adapter. Disassemble the adapter and use the screw and the nut for this mount. You…
Use two m3 4x5 heatsets.
Just a underdesk drawer. It fits the buildvolume of a cr-10. There are 3 versions. Use 4 screws to mount it on the underside of your desk.
It's a wall mountable buildplateholder. You need 4 screws to mount it on the wall. The nine slots are 4.2 mm wide. Glasplates should also fit. You will need a lot of filament :) *01.23.2023 Added a variation with 4 slots which are 3mm wide.
I know you can attach the magnet directly to the sensor but i didn't like that so i designed this mount. You need 3 6x3 magnets or a screw.
Rear skirt version for the Voron v0.2 r1 with two keystone inserts.
Morebot Scout top adaptor for a wifi antenna. 09.22.2023: Second version with HEX shape to prevent the turning of the connector.
Inlays for Stanley 1-93-981 sorting solution. https://www.amazon.de/dp/B008DHZXY0?psc=1&ref=ppx_yo2ov_dt_b_product_details Naming: layers_size_subdivision.stl I'm adding more in the future.
V1: I printed the parts with PCCF but ABS should be fine. My print settings (feel free to use your own!): 3 walls, 35% infill, no supports Air Funnel First print the file "airfunnel_vx.stl", place the M2 heat insert and use the holes left…
Clip the sensor in and use some double sided tape to fix it to the wall. I printet this dualcolor on the Bambu X1. Just fill the waterdrops in the Bambuslicer.
Modified the toolholder do store the tools.
This is a magnetplate to screw on the mount. You need 4xM4 ~10mm Screws and 8x6x3 Magnets.
A place for the filamentdescription and the end of the bowden tube :) Use hotglue to mount. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Yes Supports: No Resolution: 0.2 Filament: 3DJake PLA Category: 3D Printer Accessories
Just labels for this filamentsample storage: https://www.printables.com/de/model/286887-filament-sample-expandable-wall-mount used with this samples: https://www.printables.com/de/model/27814-filament-swatch-sample Print with the text on…
These are all currently available results.
