Counting matching models…
Simple Wall mount Box for 2 Keystone Modules. The "round corner" version has more clearance, if it's too tight. The last picture shows how you can reduced the support material and also the pain to remove it a little bit.
Adapter 1" female thread to 1" hose barb Adapter 1" Innengewinde zu 1" Schlauchanschluss
War für einen Skoda Fabia 2, die gleichen Bremsen waren verbaut: Skoda Fabia (2000-2014), Golf Variant (1994), Polo (2004-2006), Vento (1992-1994), Audi A2 (2000-2005), Seat Cordoba 2003-2009, Seat Ibiza (2002-2010)... je nach verbauten…
Don't use TPU, PETG is fine Selbst die stärkste “Feder” eines Blinkers vom Kotflügel kann nach 24 Jahren nachgeben… Das gedruckte Teil kann einfach über den rest der “Feder” montiert werden und anschliessend ein bisschen mit einem…
Most bed leveling prints consist of individual rectangles spread across the print bed, which must be removed individually afterwards... WHY? A narrow 1.35 mm strip consisting of three 0.45 mm perimeters with a 0.4 mm nozzle should be…
Box for Glowstick / Knicklicht You can store: 2x Lights 7x Knicklicht/Glowstick 4.5mm 8x CR425 Battery's 7x CR322 Battery's ----- Between the Box and the Lid is 0.15mm “Air”, which gives a satisfying Click ;) If it's too tight or loose,…
Keyboard feet for Cherry Stream Keyboard "JK-85" The gap between the build-in support and the feet is 0.17mm... it shout be fine. There is also a version without support, if you want create your own support and the fusion File.
::::: This is designed for "Google Pixel 8" Phone with "Spigen Liquid Air" Case ::::: ::::: The 1st version is for a "Google Pixel 4a" with a cheap "TesRank Google Pixel 4a Case" ::::: You can edit the file a little bit to make it work…
This is just the Battery insert for the BetaFPV Air65 Tinywhoop Case made by melnikod !!! I shrinked just the general size (red markings) by 0.2mm, because it would not fit. The Battery recesses are now a little wider by 0.2mm (red…
!!! Rechte Kurbel hat ein Linksgwinde !!! !!! Right Crank has a left-hand thread !!! 30% Gyroid Infill is strong enough to rip the plastic apart (as you can see) UNSCREW THE RIGHT CRANK CLOCKWISE ;) It's a normal 20 tooth Bottom Bracket…
Keine Haftung Benutzung auf eiegene Gefahr ! Disclaimer Use at your own risk! ZUVIEL DRUCK KANN DIE BREMSANLAGE SCHÄDIGEN ! TOO MUCH PRESSURE MAY DAMAGE THE BRAKING SYSTEM! Teilenummer des Original Deckels " 6N1611349B " ( Skoda Fabia 5J…
Der "sicherungspin" (Olivgrün) wird eiegentlich nicht benötigt, hält auch so ohne probleme. Verbaut sind die Clips neben dem Fabia (2000-2015) auch im Octavia (2009-2013) und Roomster (2006-2015)
If you wanna print a 5 mm hole you have to print it bigger, but how much ? You could check the "fit" you need for instance with a 5 mm Drill and take these numbers into your CAD Software to model your holes. With 0.2 mm Layerheight ( 0.4…
Adapter 1 ¼" male thread to 1 ¼" male thread Adapter 1 ¼" Aussengewinde zu 1 ¼" Aussengewinde 1 1/4
ND Filter Box for “ RunCam Thumb Pro W ” I got the “ New ” version, i don't know if the older version got the same size.. so test it ^^ ----- Between the Box and the Lid is 0.15mm “Air”, which gives a satisfying Click ;) If it's too tight…
--------------- Funktion -------------------- Function ------------ Der rote Drehknopf ist mit einer M6x20 Schraube von unten locker mit der Aussenhülle verschraubt, das grüne Innenteil ist Formschlüssig mit dem roten Drehknopf verbunden…
This is a Power supply mount for a JEBO UV Sterilizer Lamp that you can buy from Aliexpress or somewhere else.. The Wall thickness is 2.25mm. A 0.4mm Nozzle has a extrusuion with of 0.45, so 5x0.45mm = 2.25mm. If your slicer wants to…
Mendel90 - X-Axis for the Sturdy Version (10mm rods) using a T8 Lead Screw instead of the normal 8mm Threaded rod. It's a complete rebuild, so addons that screws on might not fit, but all Holes and faces should be where there should be !…
-------- Druckeinstellungen -------- 0.4 mm Nozzle 0.2 mm Schichthöhe / Layerheight 0.28 mm erste Schicht / first Layer ---------- Druck / support ---------- Alle innenteile wie rechts Rot markiert brauchen kein Support Material, einzig…
Yet another Mount for the Bigtreetech SKR v1.4… The SKR Board (Black) is screwed to the Holder (Grey). The RaspberryPi (Green) is screwd to these 2 little mounts ("_raspi-halter") (Blue) The RaspberryPi can now slide in on and out on…
-------- Druckeinstellungen -------- 0.4 mm Nozzle 0.2 mm Schichthöhe / Layerheight 0.28 mm erste Schicht / first Layer ---------- Druck / support ---------- Gedacht war der Adapter für folgende Düse: 60cm Lang und flexibel, gibt's bei…
-------- Druckeinstellungen -------- 0.4 mm Nozzle 0.2 mm Schichthöhe / Layerheight 0.28 mm erste Schicht / first Layer ---------- Druck / support ---------- Alle innenteile wie rechts Rot markiert brauchen kein Support Material, einzig…
These are all currently available results.
