Counting matching models…
Overview: First of all, feel free to ask questions and leave sugestions what to add to the MMU/instructions. I built WKMU based on the working principles of AMS Lite (Didn't know that at the time). It uses 4 secondary stage extruders that…
A really simple conversion for ender5 pro with original motion system. Allows to equip it with Phaetus Rapido 2, Orbiter 2.5 and BTT Accelerometer. It is prepared for two 5015 cooling fans and one 4020 hotend fan. IMPORTANT note: There is…
you need m3 screws with the 2mm heads The offsets are: X: 37.33 Y:10.25
Just a longer version of neuroshima hex token box, now able to house both the hexagonal tokens in the big compartment and round ones in the small compartment.
Had problem after installing MercuryOne corexy motion system, the bed was too far from the nozzle. This is a simple riser for oryginal ender 5 endstop. I use MercuryOne with rapido2 hotend. HEAT INSERTS NEEDED You need M3 4mm long 5mm…
Just a remix of adafruit's press. No need to have a press to build a press :P
The PTFE tubes are fritcion fitted into the splitter. Print it with a low stringing material, any strings inside the splitter can cause jams or blockage. (I used PETG-cf)
YOU NEED A BOARD THAT SUPPORTS 2 STEPPER MOTTORS ON ONE DRIVER (LIKE BTT SKR MINI E3 V3) What you can expect after the upgrade: The structure supports the bed on the other end, so it cant flex up and down freely like it does in the…
I changed the texts in the model to english. Print in PLA. You need some multicolour system for the label and the screen. Print the main body in 0.3mm layer or whatever. Label/screen and hearts should be printed in smaller layer height,…
A simple remake of Mercury one Frontplate. The fine grill replaced with a broader cross. I made it because i had problems with printing the very fine mesh on my glass bed.
Nothing to describe. REMEMBER to allow the cool air to flow through the fan into the chamber, otherwise the fan will demagnetize. :)
What it is? The project is basically a device that can stream audio to your speakers by itself and can be controlled by any device in a network that has a browser, something like sonos devices, you can also setup multiroom using snapcast.…
These are all currently available results.
