Counting matching models…
This cable chain ( SPINE ) supports the extruder ribbon cable on the Sovol SV06 3d printer and stops it from sagging on taller prints. There are three special pieces for the ends of the spine. Refer to the pictures for correct placement,…
This is version 2 of my original SV06/SV06+ heatbed cable support design. This variation is a one-piece cable support and it's super easy to install. No tools are needed, and you do not have to remove any parts. Once mounted, insert the…
A simple, easy-to-print, retro-style 35mm film holder for DSLR scanning or negative viewing. The included registration posts make it easy to align when gluing and assembling. Please post your make. Enjoy File "35mm_Film_Holder_NG.stl" has…
This is a very easy-to-print, easy-to-install SNAP-ON back cover for the SOVOL SV06 3d printer. To install, simply disconnect the ribbon cable from the LCD controller board, snap the cover in place, re-connect the ribbon cable, and you're…
This small upgrade solves the problem of the torque effect on the linear block bearing and the quick shifting of the heatbed when homing the Y-axis. I didn't like the idea of the linear block bearing under the bed being used as a stop for…
A simple heat bed cable strain relief for the SOVOL SV06 3d printer. The 3D-printed piece fits around the cable and inside the existing cable cover. use a zip-tie to clamp the cable in place. Make sure to put the tie head on top so it…
This heat bed cable strain relief raises the cable up to a 30° angle coming out from the heat bed and minimizes/eliminates cable contact with the rear frame cover. The most common cause of heat bed cable failure is solder joints breaking…
A simple but effective lather bowl with spiral ridges and brush rest. Very easy to print without supports. There are three sizes, a medium (approx. 110mm internal diameter), with the brush rest not as deep. The large version is…
The professionally designed travel/storage case for the Henson AL13 safety razor is a sleek and innovative solution for safely transporting and storing your razor and blades. Designed with precision and attention to detail, this…
A simple spool holder for the SV06. I designed this spool holder specifically for the SV06 3D printer, but it might work on others. This spool holder mounts over the existing spool holder. To install, temporarily remove the tube from the…
This is a very easy-to-print, very easy-to-install filament guide for the SOVOL SV06. No tools are required for installation. To install, temporarily remove the spool holder tube and slide the filament guide over the spool holder arm.…
***IMPORTANT*** Some users have experienced difficulties snapping the fan in place. Please measure the fan duct to confirm your printing results have the recommended measurements before installing the fan. If your measurements are not…
Display your safety razor in style with this modern and organic stand. It has a sleek design that adds sophistication to your grooming space. The simple yet elegant design keeps your grooming area neat and uncluttered and ensures that…
The TriDE Safety Razor seamlessly combines the ease of 3D printing with the time-tested, tried, and true principles of a traditional safety razor design. Designed for simplicity, it exemplifies the following key points: Effortless 3D…
This is a three-piece safety razor for use with double-edge blades. Post-processing requires breaking away the included supports on the blade guards and on the cap. Additional supports are not necessary. The STLs for this design are…
Please note: For structural integrity, print the head cap on its side. Supports are not needed. If you have trouble with it not sticking to the bed, use a raft. This is a two-piece safety razor for use with double-edge blades.…
As requested. A modified version of my lather bowl design without a brush rest. Please post your makes. Enjoy 11/28/2020 Update: Added STL file "Lather_Bowl_V4a.stl". This version does not have the in-turned rim. Print Settings Printer…
This is an easy-to-print, high-strength, high-precision, print-in-place vertical hinge. Specifically designed for 2020 extrusion mounting, this versatile hinge can be used in a wide range of applications. These hinges are printed in a…
This is version 2 of my original shaving brush stand. The main difference is the incorporated razor holder/channel. The razor holder can accommodate most razors with handles up to 12mm in diameter, and most shaving brushes regardless of…
This is a simple print-in-place storage case for DE blades. The case has a built-in hinge and snaps close with pressure tabs. The honeycomb design provides airflow which helps the blade dry faster if stored wet, or right after shaving.…
This fully 3D-printed safety razor uses a halved DE blade and has a smaller head profile making it easier to maneuver. The oversized gap between the safety bar and blade support makes it easy to rinse and provides better audible feedback.…
This is a simple, easy-to-print base stand for the RALENO PLV-S116 LED light. The stand gives clearance to the knobs on the back of the LED light, and with the smaller size, makes it very easy to pick up the LED light and make adjustments…
These 3 sets of base plates will convert your vintage Fat Handle Gillette Tech safety razor into a Semi-Adjustable razor. The plate sets come in either an open comb, safety bar, or a combination of the two. Each set includes 3 base plates…
-CDisplay your Henson safety razor in style with this sleek and modern, yet minimalist razor stand. The stand cradles the Henson's razor handle perfectly and securely and features a wide base for added stability. Its open channel holds…
This shaving scuttle is a variation of my Lather Bowl Design https://www.thingiverse.com/thing:3392930 . It was designed to be printed without supports. The stopper can be printed with TPU. Please post your makes. Happy Printing. 12/04/20…
This is a simple, easy-to-use shaving brush stand that doesn't require supports for printing. Use it to dry or display your shaving brushes. Please post your makes. Enjoy Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max…
This Smart Spool Holder is for the QIDI X-Smart 3 and other QIDI 3D Printers that share the same factory spool holder. It is very easy to print and very easy to install. This upgrade uses the existing spool holder and does not require any…
This is a very simple but useful stand/holder for straight razors. It can hold up to eight straight razors and spins on its base for easy access. It's a very easy print and there is no need for printing support. Please post your makes.…
Please note: For structural integrity, print the head on its side. Supports are not needed. This is a two-piece SE razor that uses Feather Pro blades. It's easy to print, but it does benefit from a well-calibrated printer. Two razor…
Now you can track the number of shaves per blade, or properly dispose of used blades with this two-in-one shaving accessory. This blade bank and blade use counter was inspired by the popular vintage radio ( 1956 RCA Victor AM vacuum tube…
A simple, easy-to-print letterpress quoin and key. Two sizes included. For best results, print in the original orientation with seams placed away from teeth, at least three shells, 100% solid infill, and no supports. A friendly reminder:…
This is version 2 of my fan duct design for The FOKOOS Odin-5 f3. It is an upgrade to my original design and has several improvements based on comments from FOKOOS users. It is slimmer with better airflow, has more clearance at the…
Art-Deco-Style blade bank with blade holder. This blade bank has a removable cover and therefore can be reused. This design prints best at 0.1 layer height, and can be printed without supports, but does benefit from a well-calibrated…
This Ever-Ready 400 shaving brush handle will fit a 20mm knot. For added weight, print at 100% infill. Please post your makes. Enjoy 11/29/2020 Update: Added file "ever_ready_400_brush_handle_26mm_knot.stl" for a 26mm knot. Height is the…
This is a GEM style SE razor appropriately named "Triceratops". Andreas from https://razors.click named it Triceratops for its protruding blade. This lightweight razor is very easy to maneuver, and its somewhat aggressive level provides a…
This is an upgrade I designed for the Anycubic 4MAX 3D Printer. It adds a better viewing angle, and you can insert/remove the SD Card without opening the door. The 4MAX is an awesome 3D printer, but I was having interference issues with…
Just a small upgrade to the already great Fokoos Odin-5 F3. This fan duct improves cooling by blowing cool air from both sides of the hot end for even better prints. If you make one, please post your make. Enjoy Print Settings Printer:…
The Ascent OC is a safety razor with a high-flex blade design that accommodates the simple but proven method of adjusting the shaving efficiency by simply turning the handle, which reduces the blade's flex and, in turn, increases the…
A very easy to mount Bracket for the Arduino Mega board. The bracket mounts with T-Nuts to 2020 extrusion beam. The board slides onto bracket and is held in place by a retaining clip. You can also mount bracket with board installed using…
Replacement scales for George Wostenholm I.XL straight razor and others. If you only need blank scales, just mirror the blank scale in your slicer. For best results, print in resin. Please post your makes. Enjoy Print Settings Printer:…
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This is a GEM style SE razor…
Inspired by several Brackets on Thingiverse, I decided to design my own. These brackets might be a bit overkill, but I really wanted something heavy duty and with good stability. I also eliminated the inside corner brackets at the top of…
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This SE safety razor uses GEM style…
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. *For structural integrity, print the…
PLEASE NOTE: GEM-style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This SE safety razor design was…
A remix of a great remix by ImaginationCreation3D ( https://www.thingiverse.com/thing:2666741 ). I Shortened the threaded base to 73mm to allow free spin on my Ender 2 with the stock spool holder fully tightened. The nut was extended to…
A simple storage solution for your straight razor collection. Ideal for long-term storage and/or for keeping in a cool dry place away from humidity. This three-part print makes it easy to print without supports. A friendly reminder:…
These 3 organic base plates will convert your vintage Fat Handle Gillette Tech safety razor into a Semi-Adjustable razor. Each base plate is marked with one, two, or three dots indicating the efficiency level ( 1 dot = mild, 2 dots =…
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This SE safety razor is a Vintage…
PLEASE NOTE: GEM style blades are specifically made for shaving. They are identical to the common single-edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. This SE safety razor is an Enders…
This is a Made-Rite 203 shaving brush I recreated a while back. I find this design to be quite unique actually. Once I got my caliper going, I realized that this handle design was breaking all the rules of symmetry, and for good reason.…
This Shave Soap Display Stand is a minimalist accessory that allows you to display those odd-shaped shaving soaps for your SOTD photos with ease. You can adjust the knob to accommodate different shapes and sizes, as well as adjust the…
Just a simple spool holder for the Anycubic 4MAX. This spool moves the filament roll forward giving full clearance on the back side. The tube is hollow and tapered, so, no supports are needed. Use the spacer between spool holder and 2020…
A very simple offset handle with a flat side for use when manually honing Rolls Razor blades. To use and maintain the proper blade angle, simply use a small piece of electrical tape and tape the handle with the flat side against the back…
This easy-to-print faceted shaving brush handle will fit a 26mm knot. For added weight, print at 100% infill. Please post your makes. Enjoy Hole dimension: 26.2mm Diameter by 13mm Depth
This razor is designed for RESIN PRINTING ONLY. The razor uses GEM style blades and can be printed directly on the build plate without supports. To install the blade, carefully insert the corners of the blade edge in the blade-guard, then…
The purpose of this compression mounted stop is to restrict the Z travel at its minimum and maximum. At some point or another, we all have crashed the hot-end onto the bed or worse, the glass. After lessons learned, I now have these stops…
A simple, easy-to-print adapter the allows the use of GEM blades with vintage SE safety razors that require original wedge, or hollow ground blades. This is a very quick print, and I recommend that both versions are printed so you can…
A simple, easy-to-print lid for the TABAC shaving soap - ceramic bowl. The lid has an integrated shaving brush stand and a small recessed area to keep your dice (if you use a dice as a counter). The original lid has small tabs that keep…
PLEASE NOTE: GEM-style blades are specifically made for shaving. They are identical to the common single-edge cutter blade you'll find at the hardware store. Hardware store blades are NOT for shaving. The GemTR v1 is a variation of my…
These are all currently available results.
