P
Printablesbeerman
Car Seat Phone stand
Rollcage prints without supports but maybe use a brim.
- Downloads
- 2,823
- Likes
- 428
- Rating
- 4.87
All models
Counting matching models…
P
Printablesbeerman
Shore Trooper Helmet V2 (Sean Fields) Split to fit 200x200 build plate
This is the V2 version of SeanKFields Shore Trooper helmet. All credit for this model goes to him I merely chopped the files to fit my bed. The original files (including the armour) can be downloaded directly from…
- Downloads
- 697
- Likes
- 169
- Rating
- 5
P
Printablesbeerman
Led Hexagonal Panels
I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it cleanly but adds a way to cable tie to the wires out of the way. I also moved holes to where I need them. I've have added…
- Downloads
- 323
- Likes
- 114
- Rating
- 0
P
Printablesbeerman
Ugreen 4 port USB 3.0 hub under desk mount
Ugreen 4 port USB 3.0 hub under desk mount. Fits perfectly around the usb hub and mounts to the desk. I bought the 1 metre cable hub so I can run it down to my PC…
- Downloads
- 251
- Likes
- 45
- Rating
- 5
P
Printablesbeerman
Sean Fields Tank Trooper (Split to fit 200x200mm build plate)
Tank trooper helmet by Sean Fields, not my design, I've just split it in meshmixer to fit my printer. Only the first 6 files required splitting. Original files can be downloaded from shoretrooper.co.uk Happy Star Wars day :) UPDATE: Made…
- Downloads
- 228
- Likes
- 96
- Rating
- 0
P
Printablesbeerman
5 inch LCD for Raspberry Pi case
Raspberry Pi 5 inch lcd case Fits the Raspberry pi 5 inch HDMI display-B with capacitive touch LCD screen found here - https://www.aliexpress.com/item/1005002550189338.html Edit: Reprinted with a carbon effect on the front. Category:…
- Downloads
- 224
- Likes
- 18
- Rating
- 0
P
Printablesbeerman
7 Inch HDMI LCD monitor case
Case for a KD070V02 7 inch LCD monitor I got on AliExpress. 2 versions for the front. One uses M3 threaded inserts and the other you just screw directly into the plastic using M3 screws. https://www.aliexpress.com/item/1005006428560580.html
- Downloads
- 210
- Likes
- 23
- Rating
- 0
P
Printablesbeerman
Artillery Sidewinder X1 Webcam Mount
A mount for a webcam for a Sidewinder X1, although it should also fit the X2 I used an m6 bolt to attach the camera. Last pic shows bed fully extended Added an extended version for those that are using pei sheets with the tab at the front…
- Downloads
- 192
- Likes
- 24
- Rating
- 4.5
P
Printablesbeerman
Power Supply Cover (5v)
Cover for 5v 20amp power supply (model S-100-5). May fit others but that's what I had. Wasn't happy with the open AC connections so designed this to make it a bit safer. Held on by an M4 screw and the clip that fits around a screw on the…
- Downloads
- 180
- Likes
- 16
- Rating
- 5
P
Printablesbeerman
PIR Motion Sensor - WEMOS D1 Mini + HC-SR501 - Philips Hue
After making one of Qrome's awesome print monitors I noticed how similar in size the OLED module and a PIR sensor I had to hand were. So instead of reinventing the wheel and creating a new body for the motion sensor I remixed Qrome's…
- Downloads
- 164
- Likes
- 17
- Rating
- 5
P
Printablesbeerman
Google Pixel 8 Charging Stand
The stand is meant for use with a case as it is slightly wider and has the charge hole slightly forward to accommodate the thickness of the case. I use a Spigen Thin Fit case but may work with others. Two versions, one has a slot that…
- Downloads
- 152
- Likes
- 17
- Rating
- 0
P
Printablesbeerman
Tobii EyeX Stand
Remixed one of the links into a stand. Original here: http://www.thingiverse.com/thing:2266941 Category: Video Games
- Downloads
- 148
- Likes
- 12
- Rating
- 0
P
Printablesbeerman
Silicon Valley Gavin Belson Signature Edition logo
I made a Pied Piper logo and someone mentioned I should have printed the Gavin Belson Signature Edition logo so here it is. The one with the tab fits directly into a Lenovo Thinkstation/Thinkserver Please post a make if you make one. I…
- Downloads
- 134
- Likes
- 20
- Rating
- 5
P
Printablesbeerman
Ender 3 Wyze Cam Mount
I remixed https://www.thingiverse.com/thing:3513349 to make it a bit more compact moves the camera directly next to the bed instead of it sticking out another 5cm.
- Downloads
- 133
- Likes
- 22
- Rating
- 4.5
P
Printablesbeerman
Sunlu S1 Fan Mod - 4010 fan
I wanted to add a temp regulated fan to my sunlu s1 so remixed this model I've removed the buck convertor as I already had a 24v fan, I used a KSD 9700 normally open 40degrees switch and wired it directly to the power input. I had some…
- Downloads
- 133
- Likes
- 30
- Rating
- 5
P
Printablesbeerman
Chromecast Remote case
Filled in the bottom, chamfered the bottom edge so it's a bit more ergonomic.
- Downloads
- 131
- Likes
- 13
- Rating
- 5
P
Printablesbeerman
Stormtrooper keyring
Storm trooper keyring. Print black and pause the printer at layer 11 (if printing at 0.2mm) and change to white filament. Update, thickened up the key ring loop Category: Keychains
- Downloads
- 128
- Likes
- 14
- Rating
- 5
P
Printablesbeerman
Wemos D1 Mini Relay Case
I remixed the wemos case by rickvillela to incorporate a different relay as mine seems offset from the board so I had to add a bit of length. Mine is an aliexpress bought relay. I added terminal protection and a cover for where you need…
- Downloads
- 96
- Likes
- 14
- Rating
- 5
P
Printablesbeerman
Deej Case Volume Mixer
Remix of a Deej case to make it more compact
- Downloads
- 83
- Likes
- 17
- Rating
- 4.67
P
Printablesbeerman
Tevo Tarantula 2mm, 2.5mm, 3mm, 4mm, 5mm or 6mm Glass Bed Corner clips
Corner clips for the Tevo Tarantula with 2mm, 2.5mm, 3mm, 4mm, 5mm or 6mm thick glass. They will probably fit other printers but can't test. My main purpose with this design was to get rid of those ugly paper clips. The left side clips…
- Downloads
- 81
- Likes
- 8
- Rating
- 5
P
Printablesbeerman
The Rock Biro Pen Topper
The Rock that fits over a biro pen.
- Downloads
- 78
- Likes
- 10
- Rating
- 0
P
Printablesbeerman
Philips Hue Gen 1 LED strip clip
A simple clip for a Philips Hue Gen 1 LED strip. Category: Electronics
- Downloads
- 72
- Likes
- 10
- Rating
- 5
P
Printablesbeerman
Sidewinder X1 Raspberry Pi 3b Mount
Cleanly attach a raspberry pi 3b to a sidewinder X1. Case is my design, bracket to attach it to the sidewinder is from: https://www.thingiverse.com/thing:4332284
- Downloads
- 68
- Likes
- 5
- Rating
- 5
P
Printablesbeerman
CR1632 to CR2032 adaptor
Needed a cr2032 battery but only had a cr1632 so I made this. Category: Electronics
- Downloads
- 60
- Likes
- 7
- Rating
- 5
P
Printablesbeerman
Tevo Spider E3D 30mm Fan Cover
A remix of my other fan guard http://www.thingiverse.com/thing:2309184 Instead of the Tevo logo I've used the spider. Go to Thingiview and spin it around, it looks better from the other side. For some reason whenever I import a file it…
- Downloads
- 52
- Likes
- 6
- Rating
- 0
P
Printablesbeerman
Xiaomi Yi Home (ants cam) Stand - Printer cam
I needed a taller holder for the ants cam as the standard one is too short for monitoring prints so created this. This is my first design so if you want to remix it and make it better go ahead. I printed at 60mm/s in a 0.3 layer height.…
- Downloads
- 52
- Likes
- 7
- Rating
- 0
P
Printablesbeerman
5v Power Supply Bracket
Power supply used: https://www.amazon.co.uk/Switching-Power-Supply-adapter-Transformer/dp/B07Q2WQ8DS/ref=sr_1_9 Power supply model: S-100-5
- Downloads
- 50
- Likes
- 9
- Rating
- 0
P
Printablesbeerman
Xbox controller Wall Mount
Remixed as the original had quite a chunky profile. The arms have been given an extra 2mm as the original ones were a bit flimsy. Works with the headset adaptor and fits the edge of an Ikea lack table perfectly (although it can go…
- Downloads
- 46
- Likes
- 9
- Rating
- 5
P
Printablesbeerman
12V Temperature controller box
Built this as part of Ikea Byas fan mod: https://imgur.com/gallery/rEQp0Dr Houses the controller with a hole at the back for fan wires and one on the side for the temperature sensor.
- Downloads
- 46
- Likes
- 4
- Rating
- 0
P
Printablesbeerman
Xbox Headset Ikea Lack Table Hook
A hook for hooking things, although it's main purpose for me is for my Xbox One headset. I have a Turtle Beach Recon 40x headset and this was measured for that although I'm pretty sure it'll fit the standard headset. One design is branded…
- Downloads
- 45
- Likes
- 3
- Rating
- 0
P
Printablesbeerman
Tevo Tarantula Limit Switch Bracket for MGH12
Remixed to move the end stop 2mm higher so it works with the mgn12 rails, the original only just catches the limit switch. Category: 3D Printer Parts
- Downloads
- 44
- Likes
- 10
- Rating
- 0
P
Printablesbeerman
Temperature, Humidity, Moisture Sensor with OLED
Temp, humidity, soil moisture sensor with an OLED display in a tiny package. It also logs the data to thingspeak.com for some nice graphs. Required parts: DHT11 Temperature/humidity sensor Capacitive Soil moisture sensor Wemos D1 mini…
- Downloads
- 43
- Likes
- 5
- Rating
- 0
P
Printablesbeerman
Creative Inspire T3030 Computer Speaker Stand
These old creative speakers are supposed to attach to a wall and do no stand up due to their curved base. This stand attaches to the slot in the back to stand them up. EDIT: Learned from a reddit post they are called the Creative Inspire…
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
Printablesbeerman
Intex Pool Right Angle Filter Cap
A friend wanted a right angle filter cap to create a jet going around the pool rather than into the middle. It's one of those 15 foot above ground circle pools made by Intex. Print with a custom support on the indented rim, unless you…
- Downloads
- 39
- Likes
- 5
- Rating
- 0
P
Printablesbeerman
Xiaomi Yi Home (ants cam) Go Pro mount - Printer cam
I wasn't happy with the my old solution for a printer cam. https://www.thingiverse.com/thing:2296449 It was pointed down more as a first layer cam so when I printed larger objects I couldn't see what was happening past around the 60mm…
- Downloads
- 35
- Likes
- 4
- Rating
- 0
P
Printablesbeerman
Tacklife Digital Caliper case insert
Didn't like the way the set of calipers was sliding around the box so made this, ironically by using my new set of calipers. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Resolution: 0.2 Infill: 20%…
- Downloads
- 32
- Likes
- 2
- Rating
- 0
P
Printablesbeerman
Silicon Valley Pied Piper logo for Lenovo Thinkstation/Thinkserver V2
I was watching the show the the dimensions looked a bit off when compared to my first effort so I grabbed the logo and put it through fusion 360 to create this. The one with the tab fits a Lenovo Thinkstation/Thinkserver Category: Computer
- Downloads
- 31
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
Scout Trooper eye pieces (to mould perspex)
I find this the easiest method of creating the eyes for all the helmets I've done. These had a lot of extra plastic that didn't need to be printed for the purpose of moulding the eye perspex so I used mesh mixer to crudely chop them. You…
- Downloads
- 29
- Likes
- 21
- Rating
- 0
P
Printablesbeerman
Death Trooper Rebreather Inserts
I was going to add some lights to this but then thought I've already have some day glow green filament I could use instead. Maybe I'll get around to the lights. I haven't glued them, they are just press fitted in for now. These are for…
- Downloads
- 27
- Likes
- 5
- Rating
- 0
P
Printablesbeerman
Dell E5570 HDD Caddy
This laptop came with no HDD and no caddy so had to make one. It fits perfectly and even lines up with one of the bottom panel screws for extra security. I based my design on Taco_man's e5510 caddy so have copied the license he used, I…
- Downloads
- 24
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
Tevo Power Supply Brackets with Fan
Rear bracket remixed from boompy's great rear bracket design. His one half covered the new power supply's integrated fan so decided to make this one with a nice tarantula on it. The tarantula was shamelessly taken from this:…
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
Smaller casing for a Samsung PM883 SSD
Needed a smaller drive so I could fit an SSD and an M.2 in my laptop. I've added the M.2 riser for a dell e5570 and the holder I remixed (https://www.thingiverse.com/thing:5161985) in case anyone else needs them (very specific use case I…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
Printablesbeerman
Limit Switch Cover - repair item
The metal tab of my limit switch broke so made this cover that flexes like the metal tab. Category: 3D Printer Accessories
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
Belt Tensioner Pulley Go Pro mount for Tevo Tarantula
A remix of the backplate from Banholms belt tensioner pulley that integrates a go pro mount. Great for timelapses. This is for the standard bed only as the large bed will pass over that spot. Category: 3D Printer Parts
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
Printablesbeerman
Oneplus 5T Stand (Standard / Spigen case)
After remixing https://www.thingiverse.com/thing:1991137 into this: https://www.thingiverse.com/thing:2748380 I got rid of my Pixel 2. I bought a Oneplus 5T and I needed a new stand so remixed it again. As with the pixel 2 I bought a…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
Magigoo top mount (120ml bottle)
Quick and simple design for mounting your Magigoo 120ml bottle on top of your printer. I suggest printing two for extra grip. Category: 3D Printer Accessories
- Downloads
- 11
- Likes
- 0
- Rating
- 0
P
Printablesbeerman
Tevo TarantulaX axis Dual Z Oldham compatible rear bracket
Remixed the rear bracket as the original hangs over the aluminium meaning you can't add an oldham coupler if you are running a dual z setup. This is essentially the same bracket with a 5mm section chopped off the bottom I use this oldham…
- Downloads
- 11
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
MKS LCD Case bracket for 18mm board
MKS LCD case bracket meant for this case design: https://www.thingiverse.com/thing:1974974 . I printed the case then didn't have any mount so the lcd was just loose so designed this bracket. It will also work with this:…
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
Printablesbeerman
Tevo Branded HotBed MosFET Case
A remix of Blanik's mosfet case with the Tevo branding. http://www.thingiverse.com/thing:2258495 Update: I've added a lid with a 60mm x 10mm fan but haven't tested as I intend to use without a fan. The other design is minimalistic and…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
Printablesbeerman
X motor mount with Integrated Limit switch upper
I wanted to use Banholm's design for the X motor mount but after printing it I noticed it wouldn't work as the limit switch upper was in the way. Originally remixed from this, you'll need to download that for the other half:…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
Printablesbeerman
Pixel 2 stand for use with Spigen case
I've been using the Nexus 5x variant I'm remixing from for about 6 months and upgraded my phone and needed a new stand. I added 1.8mm to the width and thinned the back by 1mm to accommodate for the case. The case I use is a Spigen rugged…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesbeerman
Tevo Titan Top Mount Support
I noticed the X axis couldn't travel past the Titan extruder as it caught on the x stepper motor so had to move it on top of the frame. The bracket included with the Titan is for a piece of 4020. This bolts it to the top of the frame and…
- Downloads
- 7
- Likes
- 0
- Rating
- 0
P
Printablesbeerman
Cable Chain Mount for Aluminium y Carriage (Perry Posthoorn)
Remixed it for people who like me have the small holes on the right side. Only needs the one part, the original requires 2. Print with supports. Update: Added one for the bigger hole on the right. I haven't tested this as mine is on the…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
These are all currently available results.