Counting matching models…
This is my Gridfinity-compatible Pinecil holder with storage for 5 tips and a lid. Made using this Gridfinity Add-in for Fusion 360. The bins have little grooves on the inside, so the lid snaps in place and stays on. The V24 version has…
This is a little threaded GPU Support i made in Fusion360. Adjustable from 56mm to 96mm. You can customize the height / thread length in the provided Fusion360 file.
I took Prusa's herringbone gear, converted it to be parametric using Fusion360's built-in mesh-converter, and added a hexagon around it, so you can use it like a fidged spinner I made 15mm, 12mm, 10mm, and an 8mm version. 8mm is…
This is a little Gridfinity model I have made that can hold your active soldering iron, and has a tray for a brass cleaning wool type thing. I'm using it for my Pinecil (V2), but it should also work with the TS-100, and similar…
This is my SD-Card storage solution i designed using this Gridfinity Addin for Fusion360 . It can store up to 13 SD-Cards, and 9 Micro SD-Cards. The bin has little grooves on the inside, so the lid snaps in place and stays on. V11 Update…
This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages. Note that the latch is missing the little pin on the front. Original source for the adapter plate:…
Anoter puzzle-piece my grandfather used to craft out of wood. Sadly, I don't know where this design is from, and i'm not really sure what to call it. You'll need one “O”, and two “C” parts. Solution: I made the models in Fusion360. The…
This is a modified X-Carriage for the Prusa MINI with part cooing ducts for the Revo Micro and the Stock Hotend. Remixed from solderjul . Changes listed below. Updae V26 12.11.2024: Slightly increased exit-size of middle duct cut of part…
This is my Alt-F4 Emergency button! It uses an Arduino Micro and a Cherry-MX style keyboard switch so you no longer have to press two buttons to rage-quit. If the button is held for 10 seconds, it triggers a Windows shutdown. I included…
Made this design by myself in AutoCAD, but it is of course heavily inspired by Luke 3D's popular “Hexagonal paper towel holder” The Thread isn't following any standards, i just used parameters that looked right. Print the bolt at 97% X &…
These are my Hexagonal wall panels. Made for 180mm printers like the Prusa MINI and BambuLab A1-Mini. I designed it for easy printability, simple construction, while also minimizing filament usage. Scaling them larger should not be an…
This is a remix of espr14's heatbed-cable cover thingy. I made it a bit shorter, and put some slots in the back for a zip-tie. V2 Update: It's now a bit shorter, and the top is a bit thinner. Added a big chamfer on the front to help with…
This 3D Knot Puzzle is one of the things my grandfather used to make back in his woodworking days. I know it from the German crafts-shop “OpiTec”, who sold it as a DIY-Kit. (Also known as the “Devil's knot”) Using their provided…
Update: All new and improved version here! This is a remix of Pleomin's " Detachable cooling duct - Slim version ", but a bit improved, and adjusted for the Revo-Micro This detachable cooling-system was created by boothyboothy and is…
This is a minimalistic spool roller that is also self-centering. It can hold spools up to 130mm wide. Due to the curved rollers, the spool naturally centers itself in the middle over time. It is designed to be a replacement for the Prusa…
This is a phonecase for the Xperia 1-III, meant to be printed in TPU. The green case in the pictures is Filamentum flexfill 98A. The white one is Overture highspeed TPU 95A. Both work great. The 95A one is ofcourse a bit softer. V24…
This is a little stand for the Engineer SS-02 with some holes for the spare tube UPDATE 22.02.2023: Remade the entire F360 project file using this Gridfinity Add-in for Fusion 360 . F3D & STEP files are now proper project files. The bin…
This is a direct drive conversion mod for the Elegoo Neptune 2S ONLY! This will not work on the Neptune 2, because the extruder on the 2S is right about 8.4mm taller. That's also why the filament sensor uses these janky stand-offs that…
This is a little empty tray for the left side of the Neptune 2 Remixed from: https://www.thingiverse.com/thing:5019443
In this Remixed version of E3Ds “Edition 2” mount, i added an M8x1.25mm thread to the top so you can use Prusas stock PTFE fittings. The clear benefit of the original fitting is, that they are much more durable. The Push-connector in the…
This is my best attempt at designing a mount for vinyl records, that is both, un-obtrusive, and easy to print and align. The design was precicely calculated so the top of the record perfectly rests against the wall. It consists of 2…
This is probably the most accurate Scrap Mechanic Bearing model on the internet. I designed it specifically for FDM Printing. It consists of a total of 8 printed parts, and uses a standard 608 bearing for the spinning action. See Model…
This is a very simple and robust mount to fit a pair of KOSS KSC75 directly onto the side of the Meta Quest 3. Made to be 3d-printed easily and quickly using only about 22g of PLA in total. The main “Mount” parts just fit onto the side…
This is a little mount for the Y-axys stepper motor of the Elegoo Neptune 2 it mounts with all 4 screws and is 6mm shorter than the original aluminium bracket. This is so you can mount a dampener in-between. If printed in PETG, a dampener…
This is a phoneholder that is intended to attach to one of these vent-clips for phones: https://www.amazon.de/-/en/Goldviver%C2%AE-Premium-Mobile-Accessories-Magnets/dp/B09YNVY4C6/ref=sr_1_11?crid=3V9VYNMKDXSPT I'm not using this exact…
I made this puck to make it easier to clean the printbed on my MINI. Simply fold a paper towel around it and secure it with a rubber band.
These are little 3D-printed brackets for mounting Φ10mm rods inside a cabinet. I used Φ10mm aluminium rods from a hardware store. Holds 5 spools without a problem.
This is a little Gridfinity bin that holds 6 tips for installing threaded inserts plus the pinecil / ts100 adapter. You can find a snap-on lid here: https://www.printables.com/model/266923-gridfinity-pinecil-tip-holder
After replacing the Micro-USB Port on my dad's Sennheiser Momentum Wireless 2, i realized that i accidentally melted the Volume-Button thing halfway off. So i decided to 3D-Print a replacement :)
This is an adapter for the Ergotopia Masterback to move its headrest further back. Ever since i got this chair i felt like the headrest leaning forward way too much so i designed this adapter. I printed it in PETG with 4 walls, 25%…
These are all currently available results.
![GPU Holder Max Pro 9000 [Parametric]](https://media.printables.com/media/prints/602760/images/6697680_da94602d-9c89-4674-8bb1-0f7bd3032deb_f41efe84-f920-447b-9afa-6015c269244b/20240508_125659.jpg)
![3D Knot Puzzle [Parametric]](https://media.printables.com/media/prints/594096/images/4736855_fc842d17-d52f-42fe-bad0-59d0b7938766_48f64079-6b05-4379-9fc3-1c1cce6574a4/dsc_0976.jpg)
![KOSS KSC75 Mount for Meta Quest 3 [Parametric]](https://media.printables.com/media/prints/915612/images/6992485_b6e60ffd-5eb2-45e8-a3f2-14f7067214f8_01b6ae11-af24-4303-87d8-09498f6ff2a7/20240617_210112.jpg)
![Magnietic Phoneholder [Fusion360 Parametric]](https://media.printables.com/media/prints/599801/images/4775671_11a9acf3-8ba4-4e98-8cf4-76dd5215f4e9_1e527673-1416-4dff-bcbb-d76470111418/a.png)
