Hexagonal Infill Wall Panels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
These are my Hexagonal wall panels. Made for 180mm printers like the Prusa MINI and BambuLab A1-Mini. I designed it for easy printability, simple construction, while also minimizing filament usage. Scaling them larger should not be an issue but i have not tested that.
Printing instructions:
Frame:
0.4mm nozzle, no special settings. Arachne walls recommended. Mouse-ear brims can help with adheasion. I used Overture matte black PLA
Inserts:
- 0 top & bottom layers
- 10-15% infill
- 250% line width for infill (0.4mm nozzle)
You can try a 0.6 or 0.8 nozzle to get extra thick infill patterns.
The 3mf files have OrcaSlicer settings for my Prusa MINI.
I used PolyTerra Rainbow PLA
How to build:
The insert simply snaps into the frame. It only goe
For the black backdrop i used an old T-Shirt.
Stuff the empty place with some wool.
To attach multiple panels together, use the connector parts:
Do this for all connecting edges.
The geometry of the frame is identical on all sides, so orientation does not matter.
To hang them onto a wall i simply used nails. Strong double-sided tape may work for you aswell but it did not for me sadly.
F3Z and STEP files included