Counting matching models…
Just a simple remix which removes a little from the top and bottom to allow for easy vase mode printing and turns it into a great plant pot! I have found that printing with a 0.8mm or 1.0mm wall at 0.2mm layers gives a really solid feel…
I do not use Cura and so I created a PrusaSlicer profile for the Elegoo Neptune 4 Pro (should also work with the non-Pro). This not perfect and there are still some things that need tweaking but it works well for me with the included PETG…
This is an easily printable bearing (more like a bushing) with the size and shape of a standard 6801 ball bearing. It has two separate pieces that when printed are captured together but can still rotate. This works for a stand-in while…
This is a simple system of pieces that use 6mm x 3mm magnets to snap together for mocking up and routing exhaust or other pipe routing. This base design is set up to represent 1.5" outside diameter pipe, approximately 38mm. The splitter…
This is a remix the the great design by "StrandedOrg" with a few changed features. I removed the circular recess on the bottom for easier printing and split the top part so no supports are needed. The top can be aligned with the included…
I remixed a design from thingiverse by “wgaonar” ( https://www.thingiverse.com/thing:4043526 ) to have longer sides and M4 screws that thread directly into the printed part to eliminate the nuts. The wider sides prevent the wheels from…
This is a simple system of pieces that use 18mm x 3mm magnets to snap together for mocking up and routing exhaust or other pipe routing. This base design is set up to represent 1.75" outside diameter pipe, approximately 44.45mm. In the…
Elegant display stand for the MakerBot Saber-Toothed Cat skull. There are .stl and .step files for both the base and the bar which are printed as separate pieces and just fit together without glue or anything. I have also included a copy…
I added 4 center lines to help indicate the clocking position from one piece to the next, all the lines are 90deg apart. The lines are just a small feature and these will still work with the original version without issue. I also added…
This is a simple system of pieces that use 15mm x 3mm magnets to snap together for mocking up and prototype routing exhaust or other pipe routing. This base design is set up to represent 2" outside diameter pipe, approximately 50.8mm. In…
This is an organizer or holder in the shape of 7 hexagons, three are shorter than the others, tallest is 100mm. Each cell is 50mm across (about 2") and the whole part will easily fit on just about all printers. Walls and bottom is…
This is a very spikey succulent planter pot, perfect for your spikey plants! It is oval and covered in spikes as it slightly gets wider towards the top. The blue one in the pictures is “full size” and the yellow is 75% scale. In order for…
If 3d printers existed in the gothic era, they would print this vase. Printed in translucent red it reminds me vampires… This is a very spikey vase, there is also a slight change in its overall diameter along the height. Each row has 16…
This is just a single round gear which was made from the original files and can be used as an alternate end piece. No additional requirements for printing, prints fine with basic 0.20mm layers on a 0.40mm nozzle. All credit to the…
As the human hand reaches down a supportive hand reaches up. I was inspired by “The Creation of Adam” painting by Michelangelo. To me it looks like the 3d printing god is reaching out of the bed to hold a human hand. What do you see? The…
This model is done by request for mocking up a 3 way y-fitting which goes from 3x 1.75" inlets to a single 2.5" outlet. It also has pockets for 18mm x 3mm magnets on both the inlet and outlet. The inlet pattern is just a compact 120deg…
These are all currently available results.
