Counting matching models…
Small parts organizer: tilt-out bin version. A medium sized bin that tilts out of its shell to allow access to small parts. Print instructions I printed in both PLA and PETG. No support needed. Print the two pieces and pop them together.…
Updated the hole size and made the back feet more firm. Also named all components in the .3mf file to make things easier. This is the kind of toy I would fidget with when I was a kid. A little Transformers Micro-cassette. While it does…
I have made a box with a simple flush lid. It twists close. It's a little large (112mm diameter by 100mm tall) but scales down to 50% quite well. Enjoy. Update: I originally designed this model using SketchUp, which does not natively…
Floss organizer card/bobbin. Print instructions This design is inspired by the real product that I was too lazy to buy more of when I needed them. I designed it in SketchUp. No real print instructions; I think it would be a good little…
I have created this printable maggot model for use as fishing bait or just for good old-fashioned pranks. Printable with filament or resin. A flexible material is probably best to use. The printed model is about 22.5mm long by 8.9mm tall…
This is a replacement dimmer knob for one that was broken. Print instructions Print with a brim. No support needed otherwise. I printed at .15mm resoution.
These emoji tokens use special gcode and dont use much filament. Enjoy. A single extruder is used to make an embedded, multi-color design that exists only on one layer of filament. Update: turns out I didn't merge the kiss emoji…
Tick-tock, tick-tock, tick-tock. What lies between the beats of time? Rythme. Satisfying to build, watch and listen. I was having a lot of trouble seeing the proper angles for designing a deadbeat escapement from scratch, so I started to…
New and Improved Locking Mechanism A print-in-place treasure chest/lock-box. No assembly is required, just print and go. I suggest printing at 0.30mm layer height rather than 0.20mm since 0.3 gives a nice grainy look to the box and…
A few of the eye designs found in the Naruto series. Print instructions Switch from red to black at 1.7mm. Glue a small 7mm magnet on the back side to complete.
Micro-cassette and accessory holders inspired by the Soundwave and Blaster Transformers toyline. I needed some way to organize my collection of original Transformers micro-cassette robots. I made these micro-cassette holders inspired by…
Here's a treasure chest I've been working on. Only it's a bank. It's print in place with no assembly required. Just print and go. Print at 0.3mm for a faster print. Designed for PLA but PETG works just fine. It took me a few iterations of…
I use to think that floating holes were not possible to print without support. Oh how wrong I was. Print instructions After reading the comments of With_Maltodextrin and most importantly, watching this video:…
I think I still have scraps of my very first roll of filament. I remember it was natural PLA because that's the only color I could afford at the time. Now I have plenty of filament on my shelf but I still consider it a waste to not use…
Maybe you don't like boxes and would prefer to keep your stuff in a jar. Well here's a medium sized jar for all your jar based needs. Print instructions A squat jar, medium in size. Large enough to fit your hand into but be careful, the…
Here's a little dinosaur that holds six Micro SD cards. Print instructions Instead of starting from scratch, I decided to remix my Stego-Storage USB holder. This time it's much smaller, a Micro-SD holder, and more like a Dimetrodon than a…
This is a revision of an old design I made; this one is a little smaller and prints as one piece. Has 10 standard USB sockets. Print instructions Support is needed everywhere. Use tweezers to take out the little bits of support found in…
Update: widend the holes for the AAA battery tray. Here is my entry to the battery box competition. It's a box. For batteries. I've been printing it at full-size on draft mode (0.3mm layer height) with no supports. Enjoy!
I have a few pieces of test equipment in my lab that utilize the common BNC type connector. The problem is that the connectors, when unused, are commonly left unprotected. Enter 3D printing. This little cap slips on and then twists to…
Here's a triceratops I made. Print instructions Needs support everywhere.
This is a large (full print-bed) box made for small tools or whatever you like. It has a working latch and a nameplate holder to keep you informed of the contents. No support is needed and it prints pre-assembled. Updated latch hinge to…
Join the crew and set sail for adventure. Print instructions Switch the filament out from white to yellow at 1.55mm and switch from yellow to red at 2.45mm. Then switch out the red for the black at 3.20mm. I've included gcode with the…
This bee themed board game is a version of the classic game Mancala . Play Details: There are 48 bees in total. The goal is to capture more bees than your opponent. Depending on your choice of rules, the winner is either the one with the…
Here is a prop of the Hearthstone mana token known as “The Coin”. It lights up wirelessly via inductive LEDs. I ran out of time due to the contest time frame, but I think it has come out pretty good so far. I'm including three of the coin…
This is a hanger and hook for a house gutter downspout so that a rain-chain can be hung from it. Print off this model and drop it into the downspout from above to give your rain-chain a proper attachment point.
This print uses special gcode that merges color changes along the x/y path. Don't slice yourself, just use the gcode and make the manual color changes when prompted by the printer. The color changes are in this order: Thread color, Spool…
A full-size print-in-place box for all your small part/tool storage needs. Working latch and a nameplate holder. There is also an optional basket that rests inside the box. Print instructions This is a print-in-place design with no…
Here is an over engineered carousel organizer; with over 60 parts. Don't be intimidated though, everything prints without support and no glue or extra hardware is needed for assembly. It's a pretty rugged design, inspired by old carousel…
I thought what I'd do was, I'd pretend I was one of those 3D printers. Print instructions 7mm magnet recess on the back side. Gcode has the stop and switch height already set (1.85).
Using a 5 volt inductive ring, this little mana token can represent your energy level. It lights up wirelessly! Just drop the LED into the print, glue on the lens/gem (optional) and you're ready to go. This model holds a single 4.3mmx5mm…
I received a request to remix my Micro SDimetrodon model to fit some more media types. Well here it is, the Mediasaur. Rawr! It is the same size as the Micro SDimetrodon but now has three USB sockets, one micro SD socket and a standard SD…
This is a working prototype but still a work in progress…I underestimated how much time this project would take and overestimated the free time I would have to work on it ;) My addition to the XRP platform is a set of clip-on bumpers that…
Sometimes when bathing my little dog, its convenient to have the shower head held close by at a low level. I bought a nice shower stool but it has no place for accessories. I made this showerhead mount for the stool. I started by making…
This functional USB 2.0 Extension and organizer utilizes wireless induction power to light up multiple LEDS. The whole thing is motorized and can be powered by a phone, power-bank or computer. You can access the stationary thumb-drive to…
A little over a year ago I tried out FlashForge's AI generator with a photo of my chunky gentleman tri-color corgi, Seamus. The result was okay, but not fully printable. It took some real time to clean the model up manually and this is…
These are all currently available results.
