Counting matching models…
Update 9/7/25: Added a V2 version with improved grip pattern and tweaked greebling for multi-color printing. This remix has the same install instructions as the original model. Just unscrew the bottom two screws of the magwell, slightly…
Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…
Features a fully 3D printed construction, easy threaded assembly and a fidget gear mechanism. Print Settings (For Strength and Quality) Nozzle : .4mm Layer Height : .12mm Walls : 6 Infill : 30% Gyroid Ironing : On *These settings are…
Update 7/31/25: Added a closed version. I like to see the inner workings of a blaster so I designed this open jam door. No need to disassemble the blaster. Simply snap in place and secure with the original screw. Models are print oriented…
Update 10/7/25: After putting another 500 darts through the chain, I haven't had any further issues with the normal links. A potential issue of the feeding wheel contacting the links was brought to my attention so I added wide mouth…
Simple print that uses less than 10g of filament. Adds width and grip to the existing charging handle. Making it easier to grab from either side speeding up your reload time. No need to modify or disassemble the blaster. Friction fit into…
Update 9/6/25: Added V2 versions of both styles with improved grip pattern. 2 styles available. Friction fit (FF) and Hardware (HW). No support needed and models are print oriented. I recommend a .4mm nozzle or smaller due to the fine…
*FOR PROP USE ONLY * I greatly appreciate every like, download and make! Models are split by color and are oriented for easy multi-color printing. After printing is complete, super glue the edge to the head. Slide the head into the handle…
Update 11/13/25: Added scale adjusted files. These are slightly larger if you are unhappy with the original designs fitment. Includes three different versions ranging from sealed to protect your blaster from the elements to open for easy…
Introducing the Manta Collasping Stock (Manta-CS) Only requiring the included printed pins and glue to assemble. Attaches via picatinny rail and has 3 adjustment points to customize comfort or collapse for storage. 48mm space between the…
The Orca is a modular, shell ejecting, low hardware nerf blaster that uses 4mm elastic and super glue for assembly. Designed to fit the needs of just about any hobbyist or prop blaster enjoyer. Switch from a picatinny underbarrel launcher…
Update 8/15/25: Four new shorter sizes have been added (XS, S, M, L) making for a total of 5 sizes. The full size hanguard works best with the original barrel length. Update 8/14/25: A wrap around grip has been added to the files. Print…
This ammo box roller prevents the chain from catching on the corner of the box and simply snaps into place. No hardware required. All models are print oriented and shouldn't require support. I included a easy print version with…
Update 8/6/25: Fantasy themed add-ons (last photo) can be found in the remixes. Update 8/3/25: Added a small Mlok picatinny rail that can be installed in any of the mlok slots. Update 8/1/25: New Small and XS handguards available for…
Low Power Variable Optical Scope (LPVO) Perfect for your DMR style build and mounts via picatinny rail Includes 3 different aiming caps. All featuring a unique floating reticle design when printed with translucent filament (shown in the…
Update 9/5/25: Added Smiley and Stern emoji plates. Easy to print plates that friction fit into place. Blank set included so you can add your own logo or design. MPP Improved sights:…
Allows tool-less access to your Adventure Force or Dart Zone battery. Uses M3 hardware. No support required. Prints in less than 15 minutes and uses about 1g of filament. Printed in Elegoo Apple Green PLA Basic…
Update 7/31/25: Added hybrid variation of the rear sight Update 7/30/25: Added V2 and V3 of the rear sight. Front sight is slightly lowered to account for dart drop and longer range of pro blasters. Models are print oriented. Cut 6mm…
Designed to snap into one of the five attachment points built into the MPP. Includes two different styles. Models are oriented how I printed them but you may have better luck with a different orientation. These are more of a decorative…
Update 1/18/26 : Added a new front aim cap variant meant to pair with the Orca low hardware blaster https://www.printables.com/model/1557960-orca-nerf-mega-xl-launcher-optional-shell-ejection This 100% printed red dot raises your sight…
Reload With Peace of Mind Two basic versions included. Original and Shock. The original version mimics the original magazine bumper. The shock version includes cutouts that act as crumple zones(when printed in tpu) and 8mm of extra…
Model is print oriented and doesn't require support. Should fit tightly over the original boxer muzzle. I included a fitment test that I recommend printing first. If too tight or loose, adjust the scale of the compensator in your slicer.…
These quick print charm accesorries attach to any of the five points built into the Xshot Piston Pump. No need to modify the blaster. Includes a fully printable version and a version that uses real chain instead. Models are print oriented…
Me: Can I get a sweetheart storm? Mom: We have a sweetheart storm at home. The sweetheart storm at home: All jokes aside, the MPP is an excellent blaster and this shroud aims to improve it futher. Features 28 mlok slots and includes…
Update 9/4/25: Added new versions with the cheek rest built in for easier printing. Marked CR in the files. This extended battery stock secures around the original buffer tube and doubles as an anti-spin clamp. Fits the original Xshot…
Update 8/9/25: Adjusted the geometry of every base to better fit the magwell. Designed to fit: MPP Blaster Magazine Up to 15 Darts Barrel BCAR (with or without a shroud) Battery (has a cutout for charging while on the base) Charger Name…
Available in a variety of lengths and heights. Can be scale adjusted in your slicer if you are unhappy with the fitment. Be sure to adjust the scale of pins accordingly. Filament Elegoo PLA Plus (Orange and Black)…
The Manta-IS (iron sights) were designed to provide a clear sight picture and an easy printing experience. Only requires two M4x30mm screws to attach. After printing, trim three 6mm sections of filament. Use pliers to squeeze the filament…
Modeled to resemble an old fixed stock but still retains adjustability along the buffer tube. Fits the original xshot mpp battery and also has a secondary space for storage. Models are print oriented and require support. If you really…
It's my experince that 3D printed buffer tube rings, no matter how tight they were, always needed retightend after a couple of mags. Only accentuating the issue of the spinning buffertube due to the wear on the threads. This easy print…
*FOR PROP USE ONLY * Multi-color (No AMS Required) and regular versions available. Models are in print orientation. Scaled for mens small to medium hands so check measurements and adjust if necessary before printing. Kryptonite Batarang…
Update 11/13/25: V2 has been added to the files. This version includes a colored insert for customization and improved detail work. This is a remix of the v61 Fold 6 case by JernejP. that includes a camera protector and a folding stand.…
Need an easier way to take down your Beyblade stadium? These quick release locks have you covered! Simply insert and twist to lock in place. Features a raised and textured design for easy removal. Tested to fit the Hasbro stadium but may…
These are some of the basic files that helped me create all of my shroud variations. Design your own or print Shroud1 to replace the original shroud. Included is a m-lok shape that can be turned into a hole in your CAD software for m-lok…
This improved Boxer Pro sight reuses the original picatinny mount and hardware. Remove the two screws in the original sight, install the new sight/side plates and re-tighten screws. A drop of super glue can be added to the plates to keep…
At only 60mm long, the Micro-Guard is guaranteed to be the smallest modular handguard available for the piston pump. Perfect for compact builds. Featuring a variety of options ranging from modular to a built-in quad rail. There is an…
The Fat Boy BCAR Shroud features an interchangeable design. Included are 5 different shrouds that friction fit on for easy swap. Also has a built-in clamp that keeps it secure around the bcar and barrel. Uses M3 hardware but isn't…
Easy to print multi-color model. No AMS required. Just swap filament in the last 1mm of print height. There is two versions of chain avaliable. Print in place and individual links. Individual links have tighter tolerances. No support or…
Update 12/5/25: Added a new V2 version with improved extended design. Models are print oriented and do not require support. You can adjust the scale in your slicer to achieve the perfect friction fit or add a drop of super glue to keep in…
Update 9/4/15: Added chamfered versions for smoother dart feeding. This 54mm barrel reduces the fps without sacrificing accuracy with the included PCAR option. Great for games with young ones or minimized builds. Perfect length to fit…
Update 11/4/25: Added a version that fits with the Vector Pro Cova Kit without sanding. This conversion for the Max Solo transforms it into a front loading under barrel launcher that attaches via picatinny rails. Fires multiple half…
Features No hardware assembly No blaster modification No blaster disassembly Pre-Grouped prints for easier slicing Multi-Color printing (No AMS Required) Extended front end Lowered rail for better accessory placement Raised front iron…
Update 7/2/25 - Improved instructions Introducing the Manta Pup! A double barrel, rear loading half dart blaster with a retro design. Stores up to 22 darts and doubles as a shield. Only requires 4mm elastic cord and super glue to…
Designed to drain excess water when filling. Easy print. No support needed and model is print oriented. Print multiple and carry for quick reloading. I get about 20 shots out of the gelfire raid (shoots 5 at once) before the hopper is…
I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…
I greatly appreciate every like, download and make! With summer fast approaching, get ahead of those annoying flies with this Venus Fly Trap. Simply add a DIY solution of water, vinegar, sugar and a drop of dish soap to your mason jar.…
Available in three sizes. 5mm, 10mm and 15mm. 15mm is the max before the blaster doesn't catch. A complete set prints in less than 45 minutes. Printed in elegoo pla+. Full Kit Here…
HSW Display Shelf Designed to fit my remix of KYZ Design's display found here https://www.printables.com/model/1531541-hsw-large-display-stand-225x225-remix However, it uses standard HSW mounting dimensions so it's compatible other HSW…
Model is print oriented. Support and 25% infill or higher recommended. Tube Stock https://www.printables.com/model/1508851-dart-zone-vector-pro-hammer-kit More Vector Compatible Accessories…
*Your model will not have the vertical lines in the print like pictured. I printed my test in a lower resolution. Your print will be higher quality * I greatly appreciate every like, download and make! Over-sized bamboo dart that protects…
The Manta-MS (mock suppressor) was designed with easy printing and function in mind. All models are print oriented and require minimal support. Multiple versions and sizes to fit a variety of blasters. PCAR version increases accuracy by…
Easy to install. Just unscrew the two screws holding in the original collet, replace with the new and retighten screws. Available in three sizes with varying levels of barrel friction to help achieve your perfect fit. Works with the…
Update 9/20/26 : Added new extra tight (12.75mm) and extra loose (13.15mm) dart tolerances and a fitment test. Print the fitment test first to find the best option for your darts, filament and printer. Files with pre-grouped inserts have…
Several mounting options available. Print the legs and set up for table top shooting or mount to your fence for backyard blasting. Easily disassemble, fold away or swap target designs with the simple pin assembly. Sturdy print should…
Adapter that allows the use of picatinny stocks on blasters with a N-Strike stock attachment point. Recommended Print Settings Infill : 25% Gyroid Walls : 6 Nozzle : .4mm Layer Height : .15mm Support : Yes Print horizontal for cleaner…
The Same Great Display in a Smaller Package I love KYZ's display stand but found the walls were too big for my printer. There are other sizes available but I wanted to retain the ability to use the large accessories so I made some…
Designed for easy multi-color printing. Models are in print orientation. Print the glow version and secure a rechargeable LED (find at most dollar stores) onto the top of the base for a glow effect. Includes a blank logo to customize…
Multiple sizes available ranging from 1mm to 5mm. Great for those who wired in a smaller lipo. Stack together for custom sizes.
Hybrid iron sights that combine a traditional upper sight design and a lower "floating" reticle. Attaches to pictinny via the included 3D printed pins. Models are in recommended print orientation. Support on for FrontSight_Body and…
I prefer to place my hand right under the BCAR and I found that the original handle got in the way so I came up with this low profile switch. Provides more tactile feedback with its two position design compared to the original free…
I greatly appreciate every like, download and make! Easily trim mega xl darts to a more accurate and stable 84mm length. This length allows for a better fit in silly shells. Also provides the perfect length for my inline double mega xl…
Update 8/29/25: Added three different height risers (50mm, 100mm and 150mm) for the dispenser. Also tweaked the pod ring to fix a potential slicing issue. Ammo Pod and Dispenser Includes four different lid designs. Three have cutouts that…
I greatly appreciate every like, download and make! Support : No Bed Adhesion : No Nozzle : .4 Infil : 20% minimum Layer Height : .15
Imitation red dot that attaches to pictanny with the included 3D printed pins. Models are print oriented. Print Sight Body with support. Pins can be scale adjusted in your slicer if too tight or loose. Faux Floating Reticle Instructions…
Simple print that couples talon magazines together. No support needed and models are pre-oriented. Available in different styles and sizes. Standard - Magazines face the same direction. Available in 10mm, 20mm, and 30mm widths. Flipped -…
I greatly appreciate every like, download and make! Only print side A if you are planning to mount it to something flat. Print both sides and super glue together for prop use. Support : No Bed Adhesion : Brim recommended for sharp edges…
I needed a way to upgrade my SD card storage and I figured what better way than incorporating the blaster hobby? Design inspired by a Nitroshot+ dart and includes separate compartments for organizing up to 6 cards. Included in the files…
I greatly appreciate every like, download and make! Designed with a lightweight Printables theme that doesn't sacrifice the original Pulsefire comfort and performance. Models are split by color for easy multi-color printing. No AMS…
Performance (Dart Zone Springs) Low Power NPX Spring : Light prime ~110 FPS Stock NPX Spring : Stiff prime ~150 FPS High Power NPX Spring : Very stiff prime ~180 FPS.…
The Anky is a low hardware, double barrel nerf and paper plane launcher. Inspired by a younger family member who has a love for both paper airplanes and nerf blasters. In my attempt to combine these two interests, the Anky includes a top…
Designed to resemble the original but at a smaller scale for a better test of accuracy. Printing Info Top/Bottom Thickness : 2mm Infill : 15% Gyroid Walls : 3 *You can increase the settings for higher strength but it will be harder to…
Great for night games, distinguishing teams, or marking special zombies in hvz game modes. Fits 5mm glow sticks that are found at most dollar stores. Available in a variety of designs with different glow stick counts and orientations. The…
Hybrid sight that switches between reflex and holographic style layouts. Models are print oriented. "PicHybrid_Body" requires support. Print all screws with 6 walls or more. Included in the files is a reticle insert that can be used to…
A unique way to make the handguard standout and more public friendly. Unicorn version retains the front sight mount for the original iron sight. The dragon version uses the nose horn as a sight instead. Models are print oriented and will…
Update 11/2/25: New V2 barrel inserts (second photo) have been added to the files. These allow you to fit one insert into each barrel. Making for a total of 8 usable barrels as compared to V1's 4 barrels. Easy print barrel inserts…
Update 9/23/26 : An updated version of the extended barrel threaded muzzle has been added to the files. Thank you to CJ Martin for bringing the issue to my attention! Faux suppressors with varying dimensions have also been added to…
Designed for comfort and stability with a widened 95mm base and upper finger hold. Holds other torches of similar size to the blazer big shot. The file is also very easy to modify to any size you need. Support : No Bed Adhesion : No…
Update 10/26/26 : Breech load version added to the files. Models are print oriented and do not require support. No blaster disassembly or modification required. Filament Elegoo PLA Plus (Red)
Prank your friends with a classic Rick Roll. Easy multicolor print (no ams). Model is pre-oriented and no support required. Filament Swap Below are the colors as pictured and the height range of the z-axis they should be printed between.…
SoloSloth is designed to mount onto a tactical belt with similar webbing as the one pictured. Makes a great back-up blaster holster that doesn't take up much loadout space. See original model below for stringing instructions. Use 4mm…
Great for maximizing your loadout by filling empty space with dart storage. Mounts to molle webbing similar to the belt pictured above. I recommend using a flat head to help weave the molle tabs. Other Models Pictured Dart Zone Solo…
Introducing Rumble Robots! Mini battle robots that add extra fun to the Crash Derby Game with alternate pieces and moving weapons. *Rumble Robots are not functioning robots. No electronics involved * Emotional Damage "Service with a…
A remix of my Fat Boy bcar shroud that fits the Adventure Force pcar instead. Also works great with their bcar if you choose to use the optional clamp. Same instructions as the original but includes new shroud/base designs and a new front…
Quick and easy print that adds a bit of comfort to the t-pull using a trimmed mega dart. Cutting guide included in the files and you'll need a good utility or razor blade for a smooth cut. Caps should friction fit tightly over the…
This insert allows for the giant half dart storage to carry 200+ rival ammo. Print 10 handles and 10 inserts to fill giant half dart storage. After printing is complete, super glue handles into the center of each insert. Check original…
Dual HSW Nightingale Holder Designed to store and organize your mini angled talon magazines. Compatible with HSW accessories. Printing and Model Info Models are print oriented and require minimal support. I recommend printing at 25%…
I greatly appreciate every like, download and make! Designed for easy multi-color printing. No AMS required but knowledge on how to pause a print and change filament is necessary. Mount to your dishwasher with double sided tape or four…
Print multiple and stack for custom spacer sizing. Requires some disassembly to install. I run 2 spacers but there is room for more. Experiment to find what works best with your setup. It was discovered that the end cap may be solvent…
The PocketG is a slightly larger but pocketable EDC container with two independent compartments for storage. You'll need to print all files in the "Container Body" folder and your choice of one 12mm and one 15mm insert. Blank inserts are…
Great for van life, RV or off-grid battery setups. Mounts to any flat surface via two screws or double sided tape. Design includes easy access to all controls and cutouts to keep the charger cool. Models are print oriented. I recommend…
Credit card sized guide that assists with writing signatures and initials. Great for those who are visually impaired or younger students learning to write. Features textured edges for tactile identification amongst other cards and center…
HSW Dart Display Model is print oriented and doesn't require support. I printed at 25% infill. Requires one "insert-empty" found in Model Origin below. Stack together for a comprehensive display or spread around to fill empty space on…
Only requires 4mm elastic for retention. Design includes several elastic stringing options to fit different shell types. Mount to a tactical belt or build your own bandolier with 2 inch strap https://a.co/d/0bb5H35k Swap filament when…
Simple foregrip replacement that requires no additional hardware. Holds 3x half darts in the base. No support necessary and models are print oriented. To install, remove the screws holding the original grip together. Remove original grip…
*Prop use only. Model does not function in any way* This unique prop makes a great display and doubles as a search and destroy (or other game type) prop for nerf/airsoft events. Features 100% Printed Threaded Assembly Multi-Color Printing…
Cova (Collection of Vector Accessories) This kit aims to provide maximum value and customization. From compact to full size builds, the Cova Kit has you covered. Be sure to check back in the future for updates and more accessories. Update…
Features No Hardware Assembly No Blaster Modification No Blaster Disassembly Pre-Grouped and Pre-oriented Models Dual Setting Front and Rear Iron Sights Extended and Raised Top Picatinny Friction Fit Muzzle with Picatinny Rail 4 Point…
These are all currently available results.
