Counting matching models…
A simple remix of the original for up to 10mm belts. Uses 8mm panheads instead of taper screws - ignore the caps in the picture, I was lazy and they were closer. Does print useably without the supports but very clean print with them in…
Includes both 20 and 30mm spacing versions and fusion files with editable parameters to make them in any size and spacing, see below; Designed around INDX and a Voron style PTFE inlet so has 30mm spacing, in between the 20mm Voron inlet…
A relatively simple addition of an eddy probe to the front cover of SB. Allows for it to be easily added to a tap setup with a small (Y-25mm) offset. In my case it can scan the whole bed in my BLV meets trident mashup. This model was…
Modified with several changes. Mix and match to suit your needs - eg. use the servo arm for cheap 9g servos, use the OG gantry mount to mount underneath 2020 extrusion Gantry mount modified to be able to be attached to upright 2020…
Uses the same offsets as Keenzkustoms
6 LED case of OV9726 Axiscope camera. You will need the read plate from the original files
Reuploaded from my thingiverse. A simple foot designed to fit under the 2040 extrusion on the base of a BLV cube with M5 hammer nuts into the V-Channel and directly into the extrusion end. Includes holes for a rubber wheel caster with…
Inspired by the Prusa tags but made from scratch. Premade for numbers 0-9 and for PLA, PETG, ABS, ASA, PC, TPU and SUP but the .3MF file can easily be edited to whatever you want. Have 14 tools? Just change it. Hate the font? Just change…
widened the bracket holes to fit better and allow it to be directly screwed into the angle bracket (such as these https://www.aliexpress.com/item/32707599936.html). Also removed the MGN slot. My frame had lots of space so the rail just…
A simple corner camera mount that uses the built in adjustment with the Razer Kyro. Includes 52 55 and 58 degree angles (picture is a 350 trident* and 52degree mount and toolhead at 175,175) to adjust to different positions. f3d included…
My take on the B2V conversion doesn't have the electronics compartment printed and rather has the frame sitting on casters (https://www.printables.com/model/1491602-caster-for-2040blv-frame). This skirt fits between my caster feet and…
These are spacers for a 9mm (10mm works too, don't be me, buy 9mm belts) for the very cheap (about ⅓ of the others I could find when the bearings are included) laser cut stainless set by Funssor…
For use the the (very cheap) Funssor stainless steel laser cut set (https://www.aliexpress.com/item/1005007038349339.html). You'll need the unmodified motor spacer from 3DPrintingMods/AluminumG/smokescreens github. Spacers for the XY…
A simple bracket to mount the mammoth muffler inside on a 2020 frame. Cover is available here:
A simple T split valve to let air into a CPAP circuit when there is a negative pressure (used on the inlet of my CPAP setup). This version is for use on two pipes. For the Mammoth CPAP setup in the photo please see the Mammoth specific…
Includes a modified inlet bracket and inlet valve for re circulation from a CPAP flap. Also need the inlet valve here: My Mammoth is internally mounted with a bracket I've uploaded separately here: And the driver cover is available here:
For use with an upright internal mounted mammoth muffler - bracket available here:
These are all currently available results.
