Counting matching models…
I created this box for my DREMEL accessory as a compact organizer that can be handy along. If you noticed the top and bottom, its because I have used a carbon fiber textured build plate, though you can use your preferred build plates…
This is a remix version of the Si1verEag1e's 1.9 Crawler Tire Inserts specifically design for the JConcepts Raptures. Though Si1verEag1e have a 120mm x 40mm I have made adjustments in the inner ring diameter from 48.26mm to 55mm to…
I created this design for the INGCO P20S Lithium battery charger 2.0A (FCLI2001/FCL12001E). The charger needs to be screwed in the base before mounting in the wall. You need to unscrew 4x M10 Torx tapping screw from the bottom of the…
This case is a remix from @xvilla_2875915 FNIRSI LCR-P1 Transistor and Capacitor tester parametric rugged case. Nothing special in the print parameters of this design for the remix is the added logo and details of the tester information…
I have created this as I cannot find any suitable bit holder for the INGCO powertool and this is a combination of the 2 designs from BlainLeVilain and richard.bernard This is the combination of this 2 designs, DEWALT - Side Clip Hex Bit s…
This is a Truck and Trailer park simulation button I created for my sim racing button for ETS2 and ATS. This knob fits potentiometer with 6mm shafts. Printed in Bambu Lab PETG-HF filament with the settings below. Nozzle = 0.4mm Layer…
MOZA CSV2 RSV2 Wheel Logo inspired from the design of Dexter Cobb. I have created a blank plate for anyone who wants a custom logo for their MOZA CSV2 RSV2 Steering Wheel. This also applicable to older versions of CS and RS as long as…
This is a remix design from Kostyantyn Polischuk @KostyantynPol_996395 of the FNIRSI SWM-10 portable spot welding machine rugged case. What I improved on this design is the logo and detailed information of the FNIRSI SWM-10 . (as seen in…
This is design is a combination of a remix from the Rugged Box (Parametric) by @Whity and inspired from Drill Bit Storage Case by Wakeupgeoff Remixed information of the 2 objects: Drill Bit Storage Case Inspired from the design however I…
This bit holder for multiboard is a remix from @ mmuellerphoto which I have modified to use a bolt locked and a flushed snap. You can used this moderate weight-bearing flush snap and a Locking T-Bolt from Multiboard parts.
This remix from @Jerod derived from Traxxas Radio Wall Mount. I have removed the thicker part and extend to roughly 30mm to accommodate mid and high end level of SANWA transmitters specifically MT44 and M17.
Dog Tag for Small Dogs (55mm x 30mm). I created this dog tag for my Shi'tsu
This is a custom dummy lights inspired from the POORIGIN set created by Jerry Scaler with the labeled Toyota TRD logo. This is my first printed in my AMS lite. Printed in Bambu Lab PETG-HF filament with the settings below with AMS Nozzle…
I have created this label for for the Multibin Drawers as the Plain Labels are too thin for me particularly when creating a colored text label. I have used default walls and infills but I set to 0.16mm with ironing
For all those out there who are ATS and ETS2 fans, here is my attempt in creating a steering wheel cap for the Union Pacific 18" steering wheel. Printed in Bambu Lab PETG-HF in the parameters below Nozzle = 0.4mm Layer height = 0.16mm…
My first attempt in creating a tire inserts specifically made for JConcepts Rapture 1.9 in Autodesk Fusion. (Free Version). Printed in Bambu Lab A1 Mini printer with TPU95A HF filament with the settings below: Top Shell Layers = 0 Bottom…
This is the Park Tool PCS 9.3 Tray remix from @fidoriel created to fit for the Bambu Lab A1 Mini build plate. (180mm x 180mm) and I have added logo in the print profile. Basically the dimension is now 170 x 170 to be able to print…
l design the inserts for the iNGCO DBCS0031 Countersink Set. The parametric rugged box is remixed from @TheSameNameTwice . The inserts for the countersink bits I have created in Fusion 360 and the parametric rugged box I have remixed in…
This 40x40 Aluminum end cap is remixed from FireFly ( @FireFly_2931055 ) I have widened and extended the extrusion to make a snug fit in the profile. Since this is intended to print in TPU the extrusions are wider so there should be no…
I created this design for my ParkTool SBS-1.2 Socket and Bit Set rugged box case. The size is made specifically to be able to print the box in A1 mini or any printer with smaller capacity. The original box the came with the ParkTool…
I have created the bolt locker with cap based on the design of SilverTripple for the column lock of the Dremel Workstation 220. This will makes the adjustment of the vise tool less. Printed in Bambu Lab PETG-HF filament with the settings…
World of Trucks Emblem of EuroTruck Simulator 2 and American Truck for my MOZA wheel brand emblem casing. I printed in a Bambu Lab A1 mini using eSUN PLA+ filament
This is my first trial of designing a radio control transmitter wall mount accessory specifically for mid and high-end level transmitter such as MT44 and M17 with wider dial panel and base. Printed in Bambu Lab PETG-HF filament with the…
I have created this case for the DLink DWR-U2000 Mobile WiFi to have the device have a bit of protective shell.
This creation is inspired from the 2 designs from @danam1750 ( A1 Mini Z-Axis Filament Feeder / Connector )and @Dust_Ash ( A1 Manual Filament Change - Rear Module ). I created this design to combine the bridge of the AMS lite and the…
This is a remix from the designer @laughing_monkey I have modified the wrench organizer that will fit other wrenches and drivers as well. wall loops = 4 infill = 18% Recommended to print the model in the orientation in the print profile
This creation is the development of my previous design A1-Mini-RearMountAMS+External-Rear-Bridge-Feeder . In which due to my unsatisfaction of the filament flow process performance. Don't get me wrong the inspiration is good but it is not…
I created this replacement thumbscrew for the Park Tool PCS 9.3. The thumbscrew to secure the folding legs of the PCS-9.3 is lousy, The threading loose in normal usage. All you need is an M6 35mm hex head bolt and flange nut. The filler…
These are all currently available results.
