Counting matching models…
check out the other versions Here we have an easy to print and easy to store Bottle Dryer System you can choose from 3 diffrent types of dryer (the Straight Version is better for small mouth bottles and cups) 2 diffrent Holder a version…
check out the other versions The bottom of this version is flatter and straighter, making it easier to place bottles, mugs, cups, etc... on it we have 4 versions Version 1 simple it works but for me it is a bit too shaky Version 2 more…
check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…
here we have a system to build a mold in any size you need useful if you want to cast something out of resin, create a mold out of silicone, or play with kinect sand or whatever you can think of the elements have small guides to ensure a…
check out the other versions Attention the dryer will not work if the opening of the bottle or cup is smaller than 65mm for bottles and cups with a smaller opening, have a look at version 1 and version 2 a lot of people have messaged me…
check out the other versions Here we have a holder to dry your AirUp bottle The design is kept simple in the form of a water drop Version 1 is for the bottle only Version 2 is for the bottle and the straw The holders have small channels…
here we have 2 versions Fullhat is a complete model that you print with color change over layers or print in one color and paint later or leave it as is version 2 consists of 3 parts that you can print in different colors and then put…
check out the other versions The v6 version prevents heavier vessels such as glasses or cups from slipping, which could lead to them tipping over I have created 2 models with 0.1 and 0.2 tolerance. If you are not sure, print the tolerance…
Print box and lid inserts an m3 nut inside fill the box with silica, close the lid and mount it on the inside of the lid through the small hole with an m3 screw (min. 12mm)
the parts need to be glued together after printing depending on your Printer some parts need support and/or rafts the yarn for the button eye is very small and difficult to print The Spring and Based I use are Designed by 3d Printy
a modified bracket to mount the Big Tree Tech PiTFT50 on the front of the V-Minion you need 2x M6 T-Nut 2x M6x12 allen screw 1x M6x16 allen screw (M6x12 also work) 4x M3x10 countersunk screw the holder is modified so that the TFT does not…
you can stack them on the Tower Fountain no glue needed
I really like the original design but somehow the corners always fell off when I removed or put it on, so I had the idea of screwing them on
check out the other versions As usual, it is kept simple and easy but can be used in a variety of ways Dry your straws, dropper bottles, drinking bottles, cups and more The model is available in single and multi versions. Depending on the…
For those using Ellis' Print Tuning Guide to tune their flow, this could be very helpful (for me it's the best way so far) who does not know it you have 6 blocks on the printing bed, take them down to check them and suddenly you no longer…
Here we have a simple dispenser for tape rolls, the rolls of TESA 10 x 10 x 15 and all other manufacturers with the same dimensions fit Print the 3 parts, insert tesafilm, insert cutter and screw together
a modified version of the EVA 3.0 Shroud with 2 inserts !Warning! low tolerance so check your settings before printing No Support needed to be on the safe side, the parts should be fixed with superglue
Here we have version 2. This time the numbering is on the bottom These blocks are perfect for setting the optimal extrusion if you follow the instructions from Ellis Tuning Guide ← Here it is also explained how you have to set up your…
here you can build a Xmas tree bobblehead Base and Spring are designed by 3d Printy The tree should be printed at 0.15 layer height just like the star You have to look at the Christmas tree balls, they are very small and the printing has…
here we have a bowl which can easily be printed in vase mode after printing you can simply slide the filament (1.75mm) into the openings provided to get the cool 2-colored look The size can only be changed in the Z direction
the holder is placed on the original holder and screwed then simply push in the ptfe tube
before you start you need the following parts drag chain 7x7 like this LINK connecting clamp Wago 221 this one LINK melting thread m3 like this LINK (I recommend the short version) cable ties like this LINK 3mm drill INFO you have to…
check out the other versions The v5 version is similar to the v2 version but with a 60 degree angle so that the legs require less space (width). I have created 2 models with 0.1 and 0.2 tolerance. If you are not sure, print the tolerance…
The lamp has openings inside to lay an LED stripThe tolerance of the inserts is 0.1mm so check your settings
a box for pens small tools sweets or whatever you want it is simply printed in vase mode after printing you can simply slide the filament (1.75mm) into the openings provided to get the cool 2-colored look The size can only be changed in…
Attention if you want to mount the rear box with hygrometer holder you have to drill an additional hole in the lid I did this as follows: Hold the box to the lid from the inside, mark the hole position with a permanent marker and then…
a box to mount the W3230 you need: 4x m3 heat insert 4x m3x40 screw Pay attention to the size of the recess as the W3230 is available in different dimensions
The boxes can be placed in the recesses at the bottom of the S4, the original lid is then no longer needed You need for each box: 2x m3x6 countersunk head screws (longer ones will also work)
I've been using the conversion for just over a month now and everything is going great For the conversion you need: 1x 500mm MGN12C linear rail 1x m5 heat insert 4x m3 slotted nut 16x m3 Square Corner Lock Nut (10x10x10) 36x M3x8 Allen…
a practical lid that is simply put on the edge of your mug or cup with a clip the lid can be easily opened via the ball joint for drinking makes drinking outside in the garden or in the park safer, no wasps, flies or other insects can get…
all parts can be printed without support there is enough space in the base to stick in a led strip the upper and lower inlets are simply pushed into the base, the symbols and texts are glued to the inlets on the inlets there are cutouts…
When converting the V-Minion, make sure that the linear rails run exactly parallel The tool makes alignment a little easier. 6x2mm round magnets can be used to fix the tool to the rails It is enough to print the tool once This is how I…
HueForge is a brilliant idea if you want to know more about it click here In order to get the most out of your filament for the program, you need to print the transmission discs, so I had the idea of designing a storage option Just choose…
here we have a tool that you can print quickly and easily it enables you to strip cables quickly and precisely print the version you like best insert an 18mm cutter blade and put the two parts together that's it 4 cut-outs in different…
the filament guide is simply attached to the frame with the existing screws the recording is for an M10 push fitting
a fan shroud in the design of the RatRig logo I tested the Fan Shroud on the V-Minion and on the V-Core, both have an inductive probe installed. I couldn't test whether it works for others Depending on which X endstop extension you use on…
If you ever need to remove the heated bed, you no longer need to cut off the cable ties
Here we have a smart key holder for the wall 4 versions are available The holders all have a keyhole mount on the back to be attached to the wall with a screw or nail they can also be attached with double-sided tape (pay attention to the…
This back Panel is available in 3 versions You will need the following things depending on which version you choose Version 1 LED Logo with Filtersystem 1 x 120mm FAN 1 x filter 100 x100mm (here you have to decide which type of filter you…
if you prefer the design as Core XY follow the link Coasters as 3d printing plates and the storage box is a printer incredible for everyone who loves 3d printing PRINTER Print all parts in your desired color, the parts can be put…
easy and simple so that you can mount the original holder on the side of the enclosure
With the holder you can attach your ERCF to the 3030 profile You need: 4x m6 T-slot 4x m6x12 4x m3 nut 4x m3x12
V-Minion Z-Cap with attachment on the back that both sides are open useful if you have a monitor mount on the left and a led strip on the right the rear holder is adapted so that it does not collide with the carriage of the linear rail…
Smiley Lamp use a LED Stripe inside to Light it up
for easy installation in the vehicle can be mounted horizontally and vertically the holder should be printed with support holder and clip are connected with an M3 screw
.... here we have a pluggable chopstick holder easy to print without support you can print it in .1, .2 or .3 layer height to shorten the printing time even more recommended setting 4 outer walls 20% infill honeycomb 5 top layers 5 bottom…
we have a lot of these figures and before they just lie around I thought I'd do something fun what you need 1x superglue 1x Kinder Joy figure (I used the ones that are intended for cables, others will probably work too) 1x round magnet…
Gear Box Front for the ERCF v2 with modified logo
These are all currently available results.
