58 models
Basic dimensions are down in a drawing, you should scale the model to fit your bag and clothes rod. Print on the side, no supports needed. Add enough wall layers to achieve your required strength.
Rack mount for cheap 2.5GbE switches with 1 SFP+ port. Use one of the models from the original model to fill in the other side. This includes a backstop and block to hold the power cable. These 2 features require support, but no other…
Use to mount the charger to a surface using screws
This idea was inspired by the survival paracord bracelets that are meant to ensure the wearer always has a length of cord. I always liked the Monkey's Fist knot, and thought why not put something useful inside rather than a wooden ball?…
I printed the tractor an wheels from the tractor Model in the “Original model” section. You will need 4 additional of the small wheels for the trailer (same as the front wheel for the tractor). The original model doesn't have the wheels…
If you have trouble with the seams being weak, try printing with randomized seam locations
Assembled with 3mm bolts, freely adjustable. Confirmed works with autofocus and fixed focus versions of the OV5647.
print with the fan flange against the build plate
Check out my other remix of the hexagon shelf as well that adapts to use larger screws. https://www.printables.com/model/549302-hexagon-with-larger-screw-holes-and-drill-template
I have printed these with multiple colors in PLA by manually changing filament at the first layer of text. I have tested 2 sizes: Little (for 30-210 and 30-220) and Big (for 30-230 and 30-235) These will probably fit other bins as well. I…
Should work with many variations of amcrest cameras and maybe some from other vendors. My camera is an Amcrest IP5M-T1179EW-28MM.…
Chevy Bolt Charger remodeled the bottom holder to eliminate the need for supports or bridging
This model is optimized for 3d printing and does not require any supports. I printed this with: 0.6mm nozzle, 0.3 layer height, 2 perimeters, 0.8mm layer width. I did use a brim, but this is probably not necessary.
Designed to be a more complete, more flexible tray creator. Requires the Chamfers-for-OpenSCAD add on. https://github.com/SebiTimeWaster/Chamfers-for-OpenSCAD
The fan only include blocks for windows up to 40", my windows are wider, so I needed additional blockers. Note the print orientation, there are small flats meant to interface with the bed. I recommend using a brim and supports (as shown)…
2 versions exist. One includes an extra flange on the side for mounting
I had good success printing these (and other gridfinity parts) with 0.2mm layer height, 0.6mm nozzle, and outside parameters first (outside to inside)
Sized to use “small” size command strips. The one wing version should be good for most applications, but the 2-wing one is included for cases with high vibration or some other special purpose.
Remix of BoA's model to make some changes to fit the EK AIO cooler. How to choose original or remix: If you are using for fans on an air-cooled build, use the remix, because of the eliminated airflow cutouts. I also recommend gluing the 2…
Round label to label buttons, configurable to different cutout types and text
Case for raspberry pi 4 that can use any available switches, devices, cover plates that fit standard US outlet boxes. You can connect these switches to GPIO pins to control whatever you want. you could also use a raspberry pi camera to…
Gridfinity holder for NOGA debur tool
Gridfinity holder for Paladin Tools 1700 Solder sucker
Print on the side. may need scaling in slicer to fit your handle. Model uses a 6mm diameter for the waterer handle diameter. Designed for Harris Farms waterer bought at Tractor Supply Co. New Version Hook1fine.stl is the same dimensions,…
Allows you to screw wire racks to the wall to anchor for safety. A slot is provided to allow clearance for shelf rods.
Can be used to house electronics projects or similar. You can use any US-style switches and faceplates.
Print the base, I used a marble-look PLA. No supports required. Fill the base with BBs or similar counterweight and glue the plug in place. Print the plant rack and insert leaves from your favorite fake plant. The headphone stand portion…
Print with the angled surface against the bed. Could print without supports, but it'll come out cleaner with some minimal support.
Gridfinity holder for large Suave hairspray can
Gridfinity mount for Menda Isoprophol Alcohol pump bottle
printed in PETG
Print in Vase mode
Gridfinity bin for Pruasa/ Printables Spatula
print with front down, attaches with tapping screws or wood screws.
be careful when attaching the bracket the wood panel. Overtightening the screws will split the part.
Hex shape is provided so it can easily be held with tools. Hole ID is 10 mm Hex shape is 20mm length is 10mm simply scale the x and y to whatever hole size you want to test. Example: if you want to test a 6.75mm hole, set X and Y scaling…
Erogtron PC mount: https://www.ergotron.com/en-us/products/product-details/97-468#?color=silver Ikea Desk Base: https://www.ikea.com/us/en/p/idasen-underframe-for-table-top-dark-gray-80397916/ Oatey 2" Pipe Strap…
I printed in PETG with 5 perimeters and 0.2mm layers. I had trouble with bed adhesion with the 2 smaller surfaces, but printing with a brim solved this.
Attach to the faucet with rubber band during soaking. I have used with regular vinegar and had good results. This was designed for these faucets: Delta Faucet Ara Single Hole Bathroom Faucet Brushed Nickel, Single Handle Bathroom Faucet,…
Print on it's back, I needed some supports to keep it from rocking back and forth during printing.
I recommend using bbs and epoxy as weight, but you can use anything metal/ heavy. The epoxy holds the weight in place, if you don't use it the stand makes noise when you bump it to put the phone on.
bolts to existing ATX mounting points and indicates positions for the 2 extra mATX bolts
front panel that uses an illuminated power button, USB-C and USB A 3.0 cables
remix of openscad script to make more robust and add some features
This guide will work with BoA's model or my Remix. I suggest mocking up the radiator and mount assembly and moving in into place to determine the correct location. Mark the location with a sharpie and remove the radiator assembly. Clamp…
Used to mount cylinder to extrusion frame
it's a triangle
attach with 2 sided tape
requires 4 4mm heat set inserts to mount the 120mm fan and 4 15mm m3 standoffs between the block and the printed part. Longer standoffs would be fine, but 15mm is the minimum. attach the printed part to the standoff with 10mm m3 bolts and…
I used this to route out an existing hole in solid walnut paneling to fit this electrical box.
print with small side on bed, no supports. Designed for 45x90 extrusion
The image is a version with a logo on the back panel, but the uploaded one is blank. I added the text in the slicer, so you can have whatever text you want. print the case with the back on the bed and pause to insert the plexi panel and…
4 hole version has 8.5mm (for M8) holes spaced at 45x60 2 hole version has 7mm (for M6) holes spaced at 72mm
Gridfinity holder for Japanese woodcarving knives
Mount regulator to aluminum extrusion (45 or 60mm with 10mm slot)
requires 12mm power button like this one: https://www.aliexpress.us/item/3256802451265478.html?spm=a2g0o.order_list.order_list_main.29.63421802aS7ORf&gatewayAdapt=glo2usa make sure to get a 5V button for the illumination to work from the…
These are all currently available results.
