Counting matching models…
*** Assembly Videos At bottom of this page*** Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually…
Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non printed parts list is below along with easy step by step assembly videos. Help is available, usually within 24hrs. You can contact me thru private…
BlackCrow RC 1:8 scale car tandem axle trailer hauler. Has functional tongue jack, folding ramps and toolbox. The axles articulate and conform to uneven ground. This model was designed and redesigned to make printing and assembly easy…
Assembly Videos at bottom 1:8 scale Off road camper This model was designed and redesigned to make printing and assembly easy and rewarding. No supports needed. Camper has independent suspension. The front box has storage in top…
Morrigan Rock Bouncer 1:8 Scale: __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
Big Chill Pontoon boat 1:8 Scale ---------------------------------------------------------------------------------------------------------------- Are you new to Black Crow Prints? All the STL files are here free on Printables.com. A non…
************************************************************************************************** These transmissions are intended for use with “Thumper” and “Morrigan” 1:8 scale models. Thumper -…
Optional parts for Thumper (Click on files to see visual 3D files) Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing. STL files have a Prefix letter. All parts for each set are marked with the same prefix…
SandPiper 1:8 Scale Baja race buggy - 2WD Rear Engine __________________________________________________________________________________________________________________ Are you new to Black Crow Prints? All the STL files are here free on…
These are optional tops for Thumper 4x4 Rock Crawler. The original model is here https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc/files…
You have option!! Four option on the pintle hitch alone Pintle hitch . Connects with 3mm eye bolt. Works better and cost less. https://amzn.to/3W2ogoN (US Amazon Affiliate link) Strongest Pintle- Uses a 3mm Eye Bolt cut to to allow the…
1:8 Scale tandem axle trailer for Glade Runner Glade Runner model here- https://www.printables.com/model/551978-glade-runner-rc-airboat-18-scale-by-black-crow…
!!!!!! It has come to my attention that not all 40T gears are the same. Some have a much bigger shoulder and are much thicker. I got mine on Amazon. link below. The wrong 40T has an option of a shaft up to 15mm, The cheaper version only…
Outboard Motor for Big Chill Pontoon Boat. Big Chill pontoon boat found here - https://www.printables.com/model/797773-big-chill-rc-pontoon-boat-by-black-crow Note #1 The standard parts for Big Chill are Numbered 01-05. The parts without…
***Don't forget to leave a like if you value this listing.*** Requested and Retired parts- NOT A MODEL! Just random parts people requested and a few retired parts that might still be useful. (Links are Amazon affiliate) Remember to block…
************************************************************************************************* Dec 10-2023 Thumper axles have been updated for strength. The assembly videos for the old axles are still available in the description of…
1:8 Scale tandem axle trailer for Big Chill Pontoon Boat Big Chill pontoon boat here: https://www.printables.com/model/797773-big-chill-rc-pontoon-boat-by-black-crow…
Rex - 352 Peterbilt Day Cab Front Read Carefully! - Rex is a modular truck system. This post is for the front section - More option to come - All the STL files you need to build the rollback truck is here free on printable.com. The…
This mod only works with the [Cheater B540C transmission] included here. [B] is the gear ratio [540] is the motor mount, [C] stands for Clearance. If you are serious about crawling a Thumper model, this transmission and frame setup…
Rex - Rollback Rear Section - 1:8 scale 6x6 Read Carefully! - Rex is a modular truck system - This post is for the rollback section. More option to come - All the STL files you need to build the rollback truck is here free on…
nozzle: 0.4 parts: M2 x 4mm ( visual gas cap) M2 x 8mm M2 x 25mm
Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels.…
Convert non functional headlights to functional headlights This is a headlight mod for the Thumper model found here- https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc This build was designed for…
M3 Ball Joint Tie Rods 35mm to 150mm Printed in place. ball breaks free and can turn in either direction. Screw goes in the recessed end. Use nut as a spacer.
Your GoPro can be mounted in 14 positions. Four outboard and three inboard on each side. Above roll bar, Below roll bar plus the GoPro can be mounted High or low on the mount. You can sit behind the driver's wheel or hang on the side.…
!!!!! Please read before building. This is a metal geared axle and transmission conversion for the popular 3Dsets Landy, Rancher and Bamboo. Axle ratios are 3:1 to 4:1 the original 3Dsets axles are only 1.8:1. The axles and transmission…
Steering Servo Shim If using on 3Dsets Sandy or Bug you might want to upgrade the steering horn too. See this upgrade. https://www.printables.com/model/321649-3dsets-bug-steering-fix
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
KingSong S18 EUC stand. The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong…
Big Chill Twin Engine Build *** Developer Page *** !!! This Build does not meet the same easy to build and dependability standards of other Black Crow models. This is for people that like to push the limits !!! This is a modification to…
Snow Skies for SandPiper Video below by- Holly RC and Printing - Holger Averes. SandPiper sand rail here https://www.printables.com/model/933688-sandpiper-18-scale-baja-race-buggy-2wd-rear-engine The ski mounts have a cavity in the back…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 - best if turned to 80 degrees on plate. Strongly suggest using a strong PLA: Prusa…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
If you are like me you love the 3dsets Bug but hate the easy to break steering. There are other fixes here on the site and I have tried them. Here is one that works using parts that you likely already have. The steering servos that I buy…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
3Dsets style links. Lets you adjust your suspension on 3Dsets cars. Ball not included. 35mm to 180mm. ________________________________________________________________________________________________________________ Black Crow Axles on…
Have you ever had that print that fails because it is too tall and unstable? Add this to the print table, move and turn so it touches the print to stabilize it. Simply remove support after printing. I have used these for several years and…
KingSong S18 wire protector infill 90% might need longer M2 screws 18mm designed to use #6 x ¾ screw and nut
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
Read Carefully! Read Carefully! Read Carefully! Read Carefully! Updated May 26-2025 Important!! If you downloaded the front axle upper and lower diff before May 10- 2025 The triangle is on the wrong side. The parts will work you just need…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. NOT printable on MK3 I3 , or Ender3 -Large model Strongly suggest using a strong PLA: Prusa Blend, CC3D…
Sherman Kickstand and filler plates. !!! WILL NOT FIT MAX OR NEWER!!! This only fits the original Sherman. Clean your bed or use wide painters tape for visual texture - The print bed side is the side that you see! Use double sided tape in…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
The brand you know now available to print yourself. I suggest printing walls two layers thick at 0.6 or three layers thick at 0.4. printable on MK3 I3 Strongly suggest using a strong PLA: Prusa Blend, CC3D Max, Inland Plus. Hardware: two…
These are all currently available results.
