Counting matching models…
A small container with external dimensions of only 80mm high (3.15") and a diameter of 25mm (1") (varies by model) this container offers an internal space of 76x20mm (3"x0.78"). The models can be combined with each other, they can also be…
All you need to assemble the C-clamp is an M3 screw to attach the base to the screw, this will create the thread when you first mount it. I recommend using at least 4 walls and at least 20% infill to get a fairly strong clamp.
This is a powerbank that uses the 1H961_U V6 charging board. I created 4 versions in which more cells are used starting from 3, 6, 9 and 20 recycled batteries from vapes. As hardware, apart from the charging board, you also need 12 pcs M3…
Portable cigar case, between 1 and 4 pieces. I made the cases for 3 cigar sizes, the first and smallest is for Toscanello (that's what I smoke most often :D ), the others are for Moduro and Robusto, but due to the size I'm sure more types…
This Drag Chain model is not entirely created by me, I have had it for some time but I can't remember where I got it from. I think I made enough changes to call it original but if someone recognizes the original model can share the link…
Hanger and clothes holder with hooks that you can attach to a vertical surface such as a wall, the side of a closet or any kind of panel. Each hook has 3 ways in which you can attach clothes or hangers. I printed the model out of PLA with…
Replacement for a broken mosquito or bug PVC net catch. I suggest to print this part from ABS or ASA for additional UV resistance.
This is a model that allows attaching the BTT Octopus (and Pro) motherboard as well as cooling the drivers. Since I switched from TMC 2209 to TMC 5160 Pro HV and use 56V, I found that the cooling with a single fan is not adequate for such…
After upgrading from CB1 to CM4 I decided to make a file server out of my old CB1. I found a case model but due to where I want to put it I need the case to be as covered as possible. As a file server CB1 does not need additional cooling…
Safety glasses holder for 18mm shelf. For different shelfs just scale the model, some hints. for 21mm shelvs scale at 117% for 20mm shelvs scale at 111% for 19mm shelvs scale at 105% for 17mm shelvs scale at 94% for 16mm shelvs scale at…
I have a project in which I try to increase the flow rate of plastic on an Elegoo Neptune 4 Pro and I couldn't find the heat block anywhere in the step or stl format, so I measured the block bought as a spare. I hope it is useful to you.…
A simple universal drill holder, it is made to fit the larger models but can hold the small ones good and safe. I printed mine in PETG with 3 walls and 15% gyroid infill, 4 top and bottom and no supports. The screws I used to mount the…
I needed a more resistant door stopper that I could attach to the floor, not finding any model that would satisfy my requirements, I made it myself. The dimpled version is for 10 mm silicone dots. I hope you like it and happy printing!
Replacement webcam monitor holder for cheap chinese webcam. You have to reuse the original horizontal screw. The bottom and top part are held together with 2 M4 screws (max 25mm). Hope it helps!
adapter for small bits that has a hole on both ends and helps the bit stick to the magnet
This is a small case that holds 2 Mosfet 25A modules, it has a space underneath to be able to route wires! All the holes are for M3 screws that cut their own threads the first time they are threaded.
Small tap holder for M3 M4 M5 M6, use 2 small pieces of 1.75mm for hinges.
A simple keyholder with 3 pegs and screw hole on the back to hang on the wall. You can print with no support.
I needed a way to blow out the fumes from the soldering iron so I quickly modeled this. This model was designed so that you could also attach a camera using a screw (size /4-20). I used the 36mm model but I created several models for…
This is a bit holder that attaches to the drill using the included screws. This bit holder is designed for the Steinhaus ONE 18V PRO-ONE-CDH2 drill with a 4AH battery. The magnets are not absolutely necessary but can help secure the bits,…
I've made several filament sensors found on the internet that are based on a creality endstop and they all have the same problems, more precisely THEY put a drag on the filament or it doesn't trigger properly so I decided to make my own…
These are all currently available results.
