Counting matching models…
I was asked to make a cat phone holder for a friend, Lucky BS3 cat design are better than anything I could make. If you don't have a printer, no probably. you can buy it here https://www.ebay.ca/itm/123864860853 Category: Mobile Phone
Remake , I cut off the bottom by 1 mm so it would lay flat for easier printing the original has a textured bottom. Print Settings Printer Brand: RepRap Printer: 1071979 Rafts: Doesn't Matter Supports: Yes Resolution: 0.3 Infill: 18 Notes:…
DIY cd rom stepper motor linear rail First off, a huge shout out and thanks to Mr Darwin for his great idea on using mouldable epoxy for the lead screw bolt. Please have a look at his YouTube channel for lots of great idea's and his…
Stackable screw sorter/storage box. The Small cup goes on the bottom then smallest to biggest screens bottom to top, Fill the biggest screen ( top one) place lid and shake to sort by screw size, It also acts as a storage bin as well once…
I remixed for a corner on a shield I made, sadly my computer isn't fast enough and some detail on the original model was lost when scaling and cutting. But with the stone paint I used, it doesn't matter much, The 4 inch Flat if you plan…
Please see Head mount and Sled mount V2 version for longer and lower head adjustments and easier access to screws. The original one was to tight to allow adjustment without having to take the head off, I basically redrew to make it easier…
Simple cone led reflector's for a little project I am working on, however I'm sure you can find a creative way to use in your own projects , Best print out of ABS so you can use a little bit of acetone on a shop rag to smooth out the…
A hb-69 like lens hood for Nikon 18-55 VR 2. Category: Camera
Adjustable router mortise jig, Use 1/2 inch threaded rods with 1/2-13 bolts. Use epoxy to glue both nuts on head stock clamp base, and the nut on router board adj. Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports:…
Replacement release clip for Velbon tripods D700 but I'm sure it will fit other Velbon models as well Category: Hobby
Replacement Headlight strap to hard hat clips Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: No Supports: Yes Resolution: 0.2 Infill: 50 Notes: Print with something flexible like Tualman PCTPE or TPU 3 Shells 50% infill…
Lid for a Oster blender Category: Kitchen & Dining
t 10,LED or Bulb socket. I also included STL for the mushroom lamp it has a top cap a base plate and a 9V battery clip that slides into the bottom plate Post-Printing Once printed solder wires to clips and push thought the holes. secure…
Still VERY VERY much a work in progress I uploaded only so you can bring your ideas to the project, The idea is to use heavy fishing line as belts and use pulley's system to help double the strength of weak of the cd-rom motors. I have…
2 arbor with 8tpi with inserted 1/2 inch #13 threaded rod for extra strength. PRINT AT 100% infill I am in no way responsible for your safety, uses with your own judgment. Print threads down insert the threaded rod from bottom up on the…
There are 4 possible versions you could make. 1:) lid and box 1 with the odd spiral top shape smooth without wood grain pattern. 2:) with a wood grain pattern 3:) Wave top Smooth pattern, 4:) Wave top with wood grain pattern. Box…
Double stacked 20 mm pulley to 8 mm or 5\16 rod or threaded rod for GT2 timing belts with 4/40 nut trap I also included a single layer 20mm pulley. Category: 3D Printer Parts
Same as other version with a center 8mm hole so a stainless steel rod can be inserted to provide more strength and rigidity. PLEASE print at 100% infill with maximum heat to insure proper plastic bonding. I am in no way responsible for…
Fresnel lens flash extender 95mmx135mm Fresnel lens Fits SB-600 and Neewer 750II Please let me know what flash you use and how it fits so I can adjust accordingly. Print Settings Printer Brand: RepRap Printer: Prusa I3 Resolution:…
Arts and craft butterfly, use either caller wire, or pipe cleaner to tie together. or Glue together . Go nuts try anything post if you come up with something interesting you made with it .Enjoy Print Settings Printer Brand: RepRap…
Quick release mount for Optex T-560 tripod Category: Camera
For printing clear filament to any translucent color with a Fat chisel Sharpie marker. I also provided a Prusa I3 frame mount that allows swiveling. If you plan to use with other makes of printers, I can work with you to get a hinge pin…
Remix of the EQ-1 headphone, a watertight earmuff to be used with 55mm 32ohms speakers. Print as you see fit, I printed this set out of Taulman Bridge 3 shells 35% infill with 3 tops and 3 bottom, It is important you use 3 bottoms for the…
******* An updated ver will be added in next few days ******* Changes will be made to top part only, with thicker motor mount and added hinged mount for a 40mm motor cooling fan with block supports. Direct Drive Chimera or Cyclops mount…
simple wall mount for Acer mini laptop Category: Computer
Nema17 Vertical Heavy duty adjustable motor mount. Instructions 3 shell thickness, 16 % infill Category: 3D Printer Parts
Pocket magnifying glass for a 30mm acrylic or glass lens. i was designed to be printing with a 0.4 nozzle, with 0.2mm fit clearance. it was a little lose on my printers but should be fine for others. This one was printed in ABS and the…
E3d Part cooling with single or dual radial fan. Mounting bracket to the back of the E3d chimera. Category: 3D Printer Extruders
V2 has more side wall strength guards , and a second bottom plate with longer tension wall was added. Category: 3D Printer Parts
20 toothGT2 self-centering to 5 mm shaft coupler. Category: 3D Printer Parts
Canada Post DUAL thickness gauge, to help determine the shipping cost to Canada and the USA, The small opening is for stander letters of 5 mm or less The second opening is for a 20mm(2 cm) Both openings are 180mm wide, Category: Other
Simple yet effective no screw fan deflector for a 30mm fan. If your having problems printing ABS there is a chance the hotend cooling fan is blowing air down towards your print causing it to warp by cooling it too fast, This fan clip on…
A model of the bakelite box used by Mr Carlson in his nixie tube frequency counter tutorial Use the EZM Electronic studio 1HZ to 75MHz counter kit, You will need to mount the power on and option push buttons on the underside of the board…
WORK in Progress, there is no back battery door yet, im still working on the design. Files to make a laser-cut outer shell for my joule thief boards, Found here, https://www.etsy.com/ca/listing/926095152 you can use either 3mm wood or…
Yet another wire spool, 3 part snap fit . Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: No Resolution: Any Infill: Any Category: DIY
Gel holder for Mini Maglite and Duracell 350 led , Design to help with light painting photography, made to be used with gels of 45mmx75mm. Everything is snap fitting no glue is needed. Category: Camera
An addon for the K40 90-degree exhaust duct, https://www.thingiverse.com/thing:2397199 the original design is nice, but the base is to small and to thin to hold on un the channels of the K40, once you printed the 90-degree, you simply fit…
For a Beaver 3300 bandsaw but may fit yours, outer rime is 31.2mm This version has a second deeper lip to help it stay in place alone with some holes to help with dust collection. Category: Machine Tools
Replacement adaptor, for a King Canada Mini dust collector for a 2 inch Pipe. No supports needed for ABS , angle slops are 70%. Print Settings Supports: No Resolution: 0.32 Infill: 50 Filament: Econofil ABS Category: DIY
Throat plate for a Rockwell Beaver 3300 14inch bandsaw. Category: Machine Tools
3d printable box for my joule thief boards found here https://www.etsy.com/ca/listing/926095152 Print flat side down, 1 Bottom, 1 top, and button, and glue two halves together after the board is inserted, you will also need to set the led…
I have not fully print all the parts but i have printed individual parts and they fit well together, i recommend using your smallest nozzle you own, I have tested with 0.25,0.35 and 0.4 all with good results . please ref to the original…
Same as original with only difference is it uses 624ZZ bearings. I am not the Designer of this cold end I simply cut out the space to fit bearings I had on hand, However it does work rather well. original and other build parts found here…
Only use for lost pla casting, if you wish to use with your lathe, please use my remix with the 1/2 threaded rod inset, found in my things. important must print at 100% infill , I am in no way responsible for the use of this arbor, use…
Floppy disk drive stepper motor mounting plate, for those of us that recycle our old computer part in new useful things. Category: DIY
Prusa I3 heatbed wire guide To have your wire spring back when heatbed move to the back. fits 8mm and 5/16 threaded rods. Category: 3D Printer Parts
Add-on marble with a copperhead bb's pellet for the Cyclone triple track, http://www.thingiverse.com/thing:1340784 Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: No Supports: No Resolution: 0.2 or 0.1 Infill: none Notes:…
Higher carriage bed belt compensation for lm8uu bearing shoe. its higher and slightly beefier then most are. http://www.thingiverse.com/thing:94256 Category: 3D Printer Parts
10X8 spot grid for creating a grayscale mask to even out cure time for DLP projector. Please visit Garage science on Youtube, to find out how to use his greyscale mask generator program along with a wealth of useful information on DLP…
Borg micropot 10 turn pot mount and click indexing tab. there are two knobs, one for 7ohms per click and the other for 10 ohms per click, or it can be used with out indexing tab Category: Electronics
For those of you that wants to focus a subject in very low light or even in the dark for Speedlight photography. Made fit a Neewer remote triggers (AKA Poor mans pocket wizards ) My idea was brought to reality with the help of Aaron who…
A simple flashlight hook mount for Canadian tire dual led flashlight. Print and super glue both half's together. Category: Household
As we all know FEP gets lose and sloppy over time, this is a extender made for when FEP gets worn you can add to V2 of my flexvat to re tighten the drum head without taking it apart. Category: 3D Printer Parts
Flexible chin strap attachment for watertight EQ-1 headphones, to make sure they stay nice and snug when in turbulent waters. also helps to keep on ears firmly. Printed with Taulman Bridge. Category: Audio
These are all currently available results.
