Counting matching models…
Some simple feet to raise the Ender 2 pro up about 1 inch and provide better air flow for the cooling fan. The top of the feet have a 1/8" pocket that the stock rubber pads fit into. No need to remove the stock rubber feet. The rear left…
This is a large foot which will raise the printer 1.25" to allow for fan modifications where the fan hangs down below the printer. The pad fits over the existing rubber pads with a snug fit. An optional pad can be printed from TPU or…
I had a monitor arm that I wasn't using so I decided to mount my new Sonic Pad to it. The bracket is symmetrical so print 2. Technically one is strong enough to hold it but 2 looks better. Separate versions for 100mm and 75mm hole…
This is a single piece version of my other Sonic Pad Vesa mount. It mounts the pad higher up and closer to the mount so the connections will clear the plate. This allows for a more compact mount. The bottom half of the Vesa plate will be…
The Ender 2 pro has a very loud fan for cooling the mainboard components. It is a 50mm fan set up as an intake and blows directly at the mainboard. The main issue I found was that the fan is mounted fairly close (about 2mm) to the cover…
Technically, this is a remix of the stock Creality X motor belt cover but I have no way to reference the original model as it came from a stock Ender 3 assembly in Onshape public library. The idea came from the model listed as the…
There are a lot of these designs out there but I wanted to make one that would print faster and use less plastic. This one prints in about 1 hour for both box and lid with a 0.6mm nozzle and 0.32 layer height. No supports required. There…
I was thinking of trying the spool mods that use bearings, but I don't have any bearings. I don't want to have to buy bearings. What I did have was some brad nails. This design uses 3D printed rollers and some 16ga brad nails as axles.…
When moving the extruder motor to the x axis carriage there is a hole left where it was mounted. This provides a place to tie the hot end cables down and covers the holes. The cable is oriented vertically so it does not droop down and hit…
I like to make use of what I have available, and what I have is a lot of “Smile Boxes”… I did find other designs for cardboard box reinforcing corners but they all had a rather plain design. I decided to make some that had a bit of a…
I recently bought a 2023 Kia Soul that DOES have an immobilizer key system so it is not susceptible to the recent theft issues with Kia/Hyundai vehicles. There is a sticker on the driver/passenger doors but it is barely visible. I made…
I have a few of the Thermos 18 ounce hydration bottles and the one big gripe I have with it is that the silicone grip keeps sliding up. On the newer ones I think they tried to glue it in place. These models are for printing a retaining…
These are all currently available results.
