Counting matching models…
From the factory, the rubber grommets are insufficient to keep the PTFE (Bowden) tubes in place; they begin to slide further inside the dryer and eventually cause under-extrusion issues while printing due to tightness in the line. This…
Introducing…….AIRBOOGIE!!!! This is a remote control swamp boat/airboat, designed around a boogie board. After an initial test run I have made the following changes to the design : Additional clearance for the propeller on the cowl…
https://github.com/krickatthedisco/10-Spool-Tophat-for-Voron-2.4 BOM: https://docs.google.com/spreadsheets/d/1bkKnmu6Y5YQMKTWtyxwqEnmTFSpr5iOI21mws95jtqQ/edit?usp=sharing Use code:TOPHAT for 5% off your extrusions at Zyltech.com Updated…
Print the base in ABS or ASA so it doesn't creep over time, or don't it might be fine in PLA/PETG it's only a little RC sitting on it. Print the top piece in TPU if you want a bit of grip, use foaming TPU if you want it to be extra soft…
Print at 0.12 layer height Layers 1 thru 3 white Layers 4 thru 6 black
https://github.com/krickatthedisco/lentic Clone the repo and follow the provided instructions to run this on your machine. Should work on Windows, Mac, Linux, anything with Python and a browser. Please feel free to provide…
Recommend printing at 100% infill
Use 2x M3 x 30mm SHCS and M3 nuts Hole spacing is 21.5mm, this worked for my prop spinner but may need to be adjusted for others. Fusion file is included for easy remixing.
This was created using a tool called Lentic: https://github.com/krickatthedisco/lentic/releases Lentic was developed using Cursor, but the images used to make this artwork are simply posterized screenshots from Twitch. Must be printed at…
Use this forstall on your wagon to keep the monsters at bay, make sure the frequency is set to the correct Kurtz!
Needed a separate spot for a small 3S to power my motor cooling fan, figure it could be useful to others. Requires 8x M3 heat set inserts and M3 x 12 SHCS I found one velcro strap to be sufficient for my needs, but made slots for up to…
These are all currently available results.
