Counting matching models…
i needed a simple hand cranked winch for pulling on some ropes for moving the shading net over the veggies garden. No reduction gears needed as it can easily lift a 20kg weight. It has a simple latch using gravity, 3 mounting holes to…
Designed this filament splitter to be used with a ROME for. The VCore 3.1 It fits the Orbiter V2 filament sensor and the LED is still visible, and a compact design. _Has M6 threads for the 4mmxM6 push-in fittings _Fits a very short length…
Needed a dust shoe for a Workbee Z1 fitted with a Dewalt 611 router. Found a design i liked but it did not leave enough clearance on the sides and loosing 20mm on each side of the router was a bummer.…
I'm using a 0.5mm nozzle and sometimes the walls are too thin and are not printed. Also i have some spare Futaba S3003 41mm in width and will not fit the support. As seen on the sliced models, the right one is missing some walls. Tnx for…
I needed a compact CNC dust boot for the Z1 fitted with a Dewalt 611 Only hardware needed are : 2ea M6x20 hex screws ( the M6 female threads are printed in the main body) 4ea 10x3 magnets (optional, i did not receive them yet but the boot…
I needed some indicators for the 10mm rebar temporarly sticking out of the ground Designed some simple flags with low material consumption and fast printing. the inside is more 11.3mm than 10mm as the rebar diameter is for the main body,…
The spacer fits between the hotend and the “body”, needs 2x M3 inserts, it serves as a support for guiding the cutting blade. The Dragonfly SIC screws in the “body's M3 inserts with the 2x M3 screws provided. It's a tight fit, does not…
I mounted the TV on a pivoting support to access the wardrobe behind it, so i need a support to hol the TV SFR decoder Made several iterations, i like the " SFR " lettering but not my wife……….. So i made one with a hole to limit filament…
Had this small vape dropping inside the pocket, so i made this clip-on that keeps it in reach like a pen. Added a hole for a lanyard It's a very tight fit, should be flush with the aluminium body's top, but has some "leeway" and added cut…
Needed a replacement handle for my 15 years old "L'EXPRESSO" from MAGIMIX Printed in ESUN PACF (somehow wet from manufacturer) and hollow, has some flexibility and does not break when dropped !! Print as is, vertical, no supports, 4…
Needed a wall mount for the sliding gate's spare remote. J'avais besoin d'un support pour la télécommande du portail. Brand / Marque : EVOLOGY
I ripped had to change the splinter guard but the shops are closed on weekends, so i made one The stl is 20cm long but you can stretch in the slicer or combine them. TPU is perfect for the job, and does not need to be the fancy one, any…
Simple clip to hold a 16² grounding wire on a 20mm ilr (or iro) tube. Fast printing and low material needed. I used a 0.8mm nozzle and 0.6mm height with PETG. Seems PETG holds quite well outdoors.
Needed to make some grooves in 2 meter long timber for making a door and using tenons. Printed in PETG, 0.25 layers and 4 walls. The baseplate has 98 x 56 hole spacing. Provided the STEP file so you can mod it.
These are all currently available results.
