Filament splitter for ORBITER V2 Sensor for ROME
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Designed a filament splitter, to feed 2 filaments with a ROME or 2 ERCF. It fits on the filament sensor for the ORBITER
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 56
- Makes
- 0
- Views
- 704
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Designed this filament splitter to be used with a ROME for. The VCore 3.1
It fits the Orbiter V2 filament sensor and the LED is still visible, and a compact design.
_Has M6 threads for the 4mmxM6 push-in fittings
_Fits a very short length of tube inserted in the sensor, around 10mm, cut to your needs and what fits.
_Needs some M3 (3x6 &. 3x8) self tapping screws, and 2 holes drilled in the sensor's body to hold it in place.
Printed vertical with supports, in ASA or ABS, 0.4mm nozzle, 0.15 layer height and 5 perimeters with 50% gyroid infill.