30 models
• Fits CW1 and CW2 X-carriages • Works with Voron TAP (use CW2 Carriage) • For LDO and HARTK Afterburner Toolhead PCBs • All screws mentioned are SHCS • There is a tight fit between Orbiter thumbscrew and Stealthburner main body. Feel…
Added cutout on knomi Stealthburner to make room for orbiter2 lever and tension knob.
Orbiter2 mount for voron 2.4 r2 ab < BOM > 1. Brass insert(M3, OD 5mm, Length 4mm) 17ea 2. M3x16mm bolt 2ea (Hex sockethead cap screw) 3. M3x10mm bolt 2ea (Hex sockethead cap screw) 4. M3x8mm bolt 9ea (Hex sockethead cap screw) 5. Instant…
No print support! https://www.phaetus.com/en-us/products/dxc-extruder The motor is not included as it's meant to be a drop in replacement for the Creality K1 extruder. Needs to be 12t gear (the common motor for Sherpa and Orbiter uses…
This remix allows to mount the EBB36 on the new Ender3 NG 1.2 toolhead with the Orbiter2.0. This design by MapleLeafMakers has a nice strain relief for the can cable (this was also extended for a better hold), and can be secured to the…
Just a simple model made from scratch, Includes 2x 18mm Stand offs Includes 1.5mm ‘nubbins’ to prevent shorting. Requires - 6x Brass inserts (including standoffs) or 2 if using without. - 2x M3x6 Countersunk/FHCS Screws - 2x M3x6 BH/SHCS…
***Update Jan 23, 2024*** Added horns to mount Beacon Rev H ***Update 09/26/23*** Revised bottom horns cleaned up the model slightly This is my mod of the EVA3 mount for orbiter2 and rapido, to add support for a Beacon and ebb42…
I use a ERCF with my voron and having a filament cutter makes swaps a lot easier. In the process of switching to XOL waiting on parts I wanted to be able to use orbiter on my SB for now. Unable to find support for Orbiter and filamatrix I…
See original model for more detail. This is an alpha untested design (although the original is fully tested). Be sure to print the models in the orientation as I have saved them in. I include the step file for those who wish to make…
***Update March 8, 2026 Revised error in rome.txt file. The hotend section was misplaced and now corrected by moving it ahead of the ROME section to prevent any hotend distances defined in the ROME section from potentially being…
https://github.com/kevinakasam/FrankEnstein-Duct/tree/main/Frank2.0_Beta Use a V6 hotend (non-volcano) with the Frank2.0 ecosystem. Only tested using the linear rail mount. Mounts for the sherpa mini and orbiter 2 are included. Klackender…
orbiter2 or sherpa mini sensor dragon burner
Horizontal chain mount for ebb36+Orbiter2.0
Orbiter2.0 SB model adapted for ERCF toolhead sensor, entry sensor & cutter There are only toolhead sensor version and toolhead&entry sensors version, of which the dual sensor version is 1mm higher and refers to the double step design of…
The original mount using the m3 square nut can now be used as a heat set insert. I've been using it for a month and haven't had any problems! The original model requires 35mm bolts. However, the heatset insert requires a bolt of about…
This is a remix that I made for the SV08 to mount a mini Stealthburner v2. It uses the Revo hot end and Orbiter 2. This remixed carriage allows you to use the factory belts and attaches like the original did. I made it one piece instead…
Just a simple RatRig Logo spinner for Orbiter2. The STL is for a 8x3mm magnet. I have included the Fusion360 project where the Magnet diameter, Outer perimiter diameter and extrusion height is parameterized. Print is ASA, ABS or similar…
This mod allows you to install the archetype on the cnc carriage siboor
Printed in ABS 40% infill 5 walls with active support
I've noticed the pcb mount for the 36mm boards has been deprecated and the orbiter v2.5 I'm using has a weird angle, causing the cable anchor to be tilted slightly. I've added new holes to center the mount on the toolhead, straighten it…
【大鱼UM告别远程挤出机改Orbiter2伽利略近程挤出机】 https://www.bilibili.com/video/BV164hTe4EXt/?share_source=copy_web&vd_source=4e12c27cdbe143ce298169c15797a622
Sometimes the orbiter is a little bit close to the hotend, allowing parts to interfere (e.g. toolboard wires...). You probably don't need this, but I did, twice, so now I'm saving it here. Based on Chirpy's dragonburner CAD at…
This is a print head I modeled up to mount an Orbiter v2 extruder Rapido2 hotend Btt Ebb42 PCB Klicky probe to my Seckit Sk-Go3. It uses lots of M2 and M3 bolts and corresponding heatset inserts. Every M2 bolt in the BOM uses an M2 4mm…
Quick remix to work with beacon and support for standard limit switch position.
This remix is gonna be niche - nothing wrong with the model re:printed 3D made originally, and there are other variants for standard klicky probe. In my case, I have metal v0.1 AB Gantry joints and a sintered v0.1 mgn9c that I wanted to…
Orbiter 2 and ebb36 can be applied with almost no changes to afterburner parts. << History >> - 02/06/2025: Added pg7 connector mount. Added orbiter2 back corver. - 02/04/2025: model upload. Modeling for mounting BTT ebb36 , LP12…
See in modification. As original models you will need to sand parts to fit them together. At least it was my case with PETG-CF10.
nitehawk36 backplate for orbiter2.5 and stealthchanger dragonburner backplate - no colision with optic sensor
***Update March 8, 2026 Revised error in rome.txt file. The hotend section was misplaced and now corrected by moving it ahead of the ROME section to prevent any hotend distances defined in the ROME section from potentially being…
EN This is a toolhead for Creality Ender 3 / Pro 3D printer using Orbiter 2.0 + BLtouch + 5015 blower + 3010 fan + NF Smart CR10 hotend + LED light. The toolhead is mounted using screws and heat-set threaded inserts M3 and M4 (ATTENTION -…
