Four Color ROME 4 to 1 Filament Entry with Sensor (for orbiter2)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for a 4 color ROME setup (see photo)
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 110
- Makes
- 0
- Views
- 1,088
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
***Update March 8, 2026 Revised error in rome.txt file. The hotend section was misplaced and now corrected by moving it ahead of the ROME section to prevent any hotend distances defined in the ROME section from potentially being overwritten.
***Update Jan 11, 2025 Revised ROME.TXT (rome.cfg) file for current ROME version which fixes a lot of the dimensional issues for configuration of toolhead and filament locations
*** Print the 4 to 1 filament entry with the 4 way bowden couplers side facing the bed. No supports necessary ***
I have a 4 color ROME setup (for more information on Helge Keck's ROME see link: https://github.com/HelgeKeck/rome ) on my vcore3.1-500 with v1 enclosure. It was remixed from this design: https://www.printables.com/model/441886-vcore3-rome-alternate-prints-with-ebb42-toolboard-
My 4 color setup also uses a filament cutter: https://www.printables.com/model/647352-filament-cutter-for-eva3-orbiter-rapido
And I also use elements of this toolhead design: https://www.printables.com/model/589678-eva-mod-for-orbiter2-rapido-beacon-ebb42-toolboard
To prevent de-spooling during color changes I use this design: https://www.printables.com/model/516380-one-way-filament-guide
I have attached a step file of the 4 way filament sensor for you to mod as you wish.
I have also attached my rome.cfg for your reference.
I added an additional mcu to my vcore3 to handle the two additional steppers. (SKR MINI E3 V3). All that was needed was these lines in my printer.cfg:
[mcu skrmini]
serial: /dev/btt-skr-mini-e3-30
This setup works amazingly well.
Hardware for the 4 to 1 filament entry: 5mm diax2mm magnet, 6mm dia carbon steel ball and a microswitch exactly like this: https://www.amazon.com/Cylewet-25Pcs-Switch-Arduino-CYT1073/dp/B073TYWX86/ref=sr_1_8? And for the filament entry self thread this exact style: https://www.amazon.com/dp/B08QMRLPC5?
For mounting info see the second link at the top of this description.