Counting matching models…
21-peice nested STL of Cali Cat. Loaded it, separate it, and go from there. Waste is high, print time is high, but if your goal is to nail down multi-material printing; it's worth it. Screen capture from Slic3r PE with the Prusa i3 Mk3…
A pretty large mermaid flexi... Prints well even with large layers (I test printed up to 0.3). As posted here . Category: Creatures
Wanted a vertical stand for my SS. None existed. Made one. The Maker Way. Category: Video Games
Accidentally broke the locking tabs on mine, so I laser-eyeballed the measurements based on what wasn't broken and eventually got it here, where it works. Thanks to thomhoess for the base shape, saved me some time trying to measure it out…
FDM-friendly cut-and-indexed. Category: Props
Just a weird little tank I designed while talking to some tank-y people on Discord. Category: Sculptures
Designed to interface with blocks that have a center pip, such as #6115080. I remixed this with Creator set 31054 in mind. It can be FDM printed (I did it) with an extremely tight resolution (0.05mm layer height or smaller), but obviously…
Travel Cajon with a really rich voice. Print so that the sound board (drumming surface) is solid, with as much infill as you dare (My print took nearly a full fresh spool at 60% Adaptive Cubic with 4 perimeters and 4.2mm top surfaces) .…
The dragon was missing something. So I made it! Very tight tolerances, but I assure you it does fit. In fact; it fits two different ways! Category: Animals
Needed a holder for my 18650 batteries. I have an unreal love for revolvers. So I combined my love of them with my love of cloud chasing. Don't need to print the base, but it will spin if you do~ Category: Containers
Just a nutcracker based on super old-school designs, celebrating a bit of my own German roots. I wanted it to play to the more simple classic designs with painted facial details, rather than three-dimensional ones, so the only facial…
A simple seam-testing, layer-testing, multi-material calibration disk. Has eight total parts (Four sections, four letters), for many combinations of color shifting goodness! It is a NESTED STL, so all of the parts exist in ONE file. How…
Just some alternate designs meant to keep the original design in mind with just some minor tweaks... Gaming PC - 4 slots Server - 7 slots Server Cabinet - 28 slots Server Room - 84 slots Category: Tool Holders & Boxes
Detailed face modified for 10mm glass eyes from here . The hair mesh will need to be modified after printing to fit properly, but it's depending on the eye because the eyes are handmade and do have some variation. Also made a human eared…
Sometimes things need some gofast(tm)... A supercharged V8 oughta do the trick! Category: Construction Toys
Just a quick design that I came up with screwing around in the 3D universe that lives in my computer. It is designed with using two colors in mind, but I wanted mine to be all black. "box_pip" is a print-in-place version of the box and…
I found myself in need of a choker necklace and unable to find the one I wanted. So I did what any self-respecting Maker would do; I made it. Just take the choker_plain or super_choker and throw it into any program that can throw a…
Size 12 (US, Canada, Asia) (21.4mm) non-functioning replica of the pseudo-antique* "Le Petit Protector", chambered for five shots of 5mm pin-fire. Let me reiterate; NON-FUNCTIONING. I omitted some of the design elements of the actual…
Mostly print-in-place. Prints well even with large layers (I test printed up to 0.3). You will need to glue the tails on, obviously. Category: Animals
Tutorial post here . You will need to be running a Windows-based machine for the tutorial to be of any use to you. But part of why we don't fart in an Apple store is because they don't have Windows, right? Please post anything you make…
A quick-on, quick-off tapered friction fit adapter for shooting the smaller Elite darts in the Mega Bigshock. Probably works with other "Mega" barrels as well. MUST have AR mod or this WILL NOT WORK. Part of making this easily removable…
A hubbed wheel that allows for pass-through connections (or maybe even weapon mounts) on the outside of a wheel, allowing for trikes, and even supported load platforms for the PrintABlok Space Program to transport rockets from the hanger…
Big wheels for a War Wagon I'm building in the form of a weaponized pull tractor. Works with the base wheel axle. I did use some details from the kit wheel because I wanted it to have some style continuity. But otherwise, the mesh is…
Basically the same as kmccon's, only with the correct font (The italic font threw me for an unkind loop, personally, seeing as all other "Prusa" markings on the printer were not italic), and nested for multi-material. Happy printing, and…
Decided it was time I had a MakerCoin to call my own. So I made one. Also made a blank for you to edit; makercoin_b! ("b" for "blank". I know, I'm super clever, right?) Just upload it as a remix, please, and post pictures! Category: 3D…
A cute little 3x∞ juice holder designed for 30+/-ml bottles with a diameter of 32mm (Standard size in glass bottles for juice). Print one front, one back, and however many of the center you want. Designed to have a tight fit, but they…
Time for the boats (Or other floaty things)! Has air trapped inside to offset weight on the water. Might need a little support on the ends. If your printer isn't terribly well tuned, you might need to seal it for it to be totally…
Road wheels.... You know, for those roads that aren't totally destroyed after the apocalypse. Works with the base wheel axle. Category: Construction Toys
A latching clam shell case for the Libre Computer La Frite SBC with print-in-place elements. Designed with those who didn't order the aluminium skeleton case. EDIT: Added 3MF file for custom spacing adjustments. EDIT2: This is the first…
A simple little iron-on patch with a nerdy "inside joke" that only CNC techs and Makers will understand. Print instructions You MUST secure a sheet of thin paper to the build plate for this to work. Gcode provided is set to pull filament…
VESA mount for tying a monitor to one of those generic wire racks with the ribbed legs. Designed for a friend. Uses spare shelf wedges and four 5mm zip ties. No idea who might want this, but it's just one of those weird niche things that…
Rescalled it (165mm wide), flipped it bottom down, and organized the parts via feature type. Beautiful model that I need to print some day, and everybody with a multi-material system should try. Thanks to MosaicManufacturing for releasing…
Redesigned my MakerCoin a bit. Bigger in diameter, changed the edge pattern a little bit, and now has a super cool print-in-place rolling element! I'll still use the other one, of course, when I need to print a lot really fast, but I'll…
I don't know why I have such interest in designing Maker Coins, but I do. Don't judge me! This is a little bigger than the Spinning Maker Coin, but adds another spinning element, and a keychain hook. Tolerances on the gyroscopic part are…
PrintABlok "pipe" accessory. Sorry not sorry. Enjoy~. -- UPDATE 3-12-20 -- Added updated meshes for the new connector type. Kept the old just in case. Category: Construction Toys
Fixed so they were the same size. Made it so it was easier to do multi-color. Category: Coins & Badges
Box for PrintABloks that use these 10x2mm neodymium disks instead of harder to find and more expensive 5mm spheres like the official box uses. Some tolerances added because these magnets aren't perfectly sized (I've used them before) and…
Just a few trees I designed with Yule in mind. The tallest is 100mm, the shortest is about 65mm (If I remember correctly, that is). The dual tree is a combination of the tallest and the shortest. The three tree is all three... Say that…
NOTE: An actual enclosure is not shown or included, this was designed just so that the MMU would work with one with minimal hassle. The standard Prusa-branded LACK enclosure is not MMU2-friendly due to the length of space needed behind…
A very simple chess set I designed after Pagan/Norse symbology. Pieces are all just shy of 50mm tall (Except the pawn, which is shorter), and 30mm in diameter at the base, so they should be compatible with most chess boards. The symbols I…
A friend of mine - who has some Legacy hardware - said he needed a holder for some old Zip Disks and was unable to find any on the 'Verse or otherwise. So I quickly designed these based on the specs he sent me. According to him; they…
This is a gear from a book by Patrick Rothfuss called "The Slow Regard of Silent Things"... It is broken and brazen and perfect and true. It is entirely scintillant and sweet and will not tarnish. Of course. Nothing proper and true need…
This Thing will act as a splice and a clasp for standard Lokai bracelets. If you have one that snapped (Like I did), or just want to add a clasp, this is the Thing for you! Just print, and press into place. It's pretty self-explanatory.…
Just a little wheel for manual filament advance. Press fits on a NEMA 17 shaft (15mm with a 0.5mm flat with no screwin' around. I highly suggest pausing and changing filament for the top layers just to make the pentacle pop. Blessed Be~.…
Just a simple printable card for the new design of the BBB. This version didn't come with any separators (Or nutritional foam blocks... sadface). It's the same width as the card, and a few millimeters taller. I suggest printing at 30%…
Wanted a small minimalist clock that I could print in multi-material, so I designed this. The face is nested (As all of my other multi-material STLs), and contains 13 individual parts that can be assigned differently. Designed with this…
Just a little sign to remind you, your guests, and our loving 3D Printer overlords that there is no place like G28... Has a little printed "hook" that should slide over most hanging nails and self balance/level while giving a nice little…
I noticed somebody in the Kickstarter asked for a pen-spring BB gun. After playing around with such a thing, it wasn't very easy to print on a lower speced or lesser dialed-in printer (Which was the whole idea!), so I opted for something…
Simple little bracket that bolts to the gantry using hammer nuts. It should work with any printer that uses the same kind of V-slot as the CR-10/s so long as the hotend carriage doesn't have a collision aspect on the reverse side of the…
This took some work to get it work function properly, I tell ya... Total print time for me was 8 hours, 56 minutes. The hardest part of the print for your machine will be the bearings as they are print-in-place with no support. Simply…
Simple hex-key grip to make all those Allen Keys that come with 3D printer kits/etc a lot easier to use for long periods of time. Fits up to a 3mm key. Can hold it either lengthwise for use like a regular screwdriver, or cross-wise as a…
Game board is nested for dual-extrusion. Kept the pieces separate to reduce the size of the waste block. Nice travel size. Might make a box later. If you want it bigger, just scale up. I've found that the "Noughts" print best with a brim.…
I wanted a way to bolt this wonderful mount to the frame of my CR-10, so I added tabs and M4 holes to bolt it to the frame. I also made a version without the micrometer slot for those who don't want to hang expensive equipment off a a…
A quick and easy sleeve case for the La Frite board that uses friction from the aluminum base plate for a tight friction fit. Designed to fit with or without the rubber feet. Sized with PLA's shrinkage in mind. The taller one was designed…
Doing a full Palette+/CR-10 integration and I needed this part to lock my shortened and spliced Palette tube to the chassis of my CR-10. Used in conjunction with https://www.thingiverse.com/thing:2418632 by Skulker, where I outline some…
After ripping out the primary air restriction device, I was left with an unsealed hole in the back of my Mega Bigshock. So I quickly threw together this plug. Figured I should share it. It's a tight fit when printed in ABS, easily sealed…
After putting a Motley v3 510 on my mod, I realized I really didn't like the stock collar. So I measured it out and made my own. This is the result. Scaled 1.05 larger than stock to account for some PLA shrinkage. Enjoy and feel free to…
Fastener kit for AzViper's Z Gantry Brace. Should also be semi-compatible with WickedFog's original creation. Print; 8 x "screw" 4 x "shoulderscrew" 2 x "lefthandrodend" 2 x "righthandrodend" Combine these with any of the 2020 slot…
Made a ver.2 from the ground up on account of the ver.1 having a minor issue of causing severe rectal pains in a certain group of people, who made it very clear how they felt about it in the comments. I appreciate the input and letting me…
A laser mount I designed for a cheap half-watt (Questionable if this is accurate) 405nm cutting unit I snagged on AliExpress. Still working out the bugs in making the unit as a whole work as expected, but the mount itself is good.…
What? A non-nested multi-material STL from Ky? Noooo!! Yeah, well, for whatever reason, the text and logo wouldn't nest properly, so I have to do it the "old fashioned way". Ugh. I won't make a habit of it, promise. Benefit of this is if…
Made the inner diameter on the original "frontmnt" file 15% smaller because the original size had a real tendency to disengage at tighter diaphragm settings. Now it works like a charm. Did NOT need to go that small, about 5% would have…
This is going to be a really niche fix for people who had this issue with their Eris, but a friend and client of my business has the brass bowden fitting break on one of his Eris machines. SeeMeCNC being unable (Or unwilling) to help…
The handle on my scraper broke along a crack that existed when I got it. So I made a new one. You will need to file the tang a bit to knock down some corners. I personally think this fits the hand WAY better. Held together with some spare…
I picked up these super cheap LED hat lights are a popular superstore (Which I also work at) so I could hack them into layer lights for my printer. Since the HE-280 upgrade, my old chassis-mounted lights no longer work due to the…
These are all currently available results.
