Counting matching models…
A simple rectangular container with lid. Is Customizable with Customizer In OpenSCAD Looks like a tolerance variable of 0.2 is a tight fit, and 0.3 is a loose fit.
This is a simple zip tie anchor Print instructions Category: Parts Instructions Print as needed. Thread zip tie threw hole Stick double sided foam tape to the bottom and attach where needed. I found this tricky to print. If you use…
I needed two m3 tslot nuts. Didn't want to wait a month for stuff from china. Takes a standard m3 nut In openscad Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3 MK2S Supports: Yes Resolution:…
A half case for the 18650 battery shield v3. This is to protect the electronics from abuse. Uses 4* 6mm cap head screws. Print instructions Category: DIY
Designed as a simple jewellery box insert or tray. To replace the one that was stolen by thieves! :( openscad source is included in case someone wants it as a base for something else.
Simple power socket cover. Needed a way to keep fingers away from mains for a IEC C14 socket All screws are M3, and isolated in plastic well away from any power.
A simple mount for a power supply on tslot type machines. Mostly parametric, variables at top of scad. Tslot screw is 8mm M5 Button head Socket Cap, power supply screw is M4 Socket Cap Hex Head Included stl is for 2020 tslot, can be…
A simple leg. Designed for a corner tslot type system Height and tslot size is adjustable in the scad. Print instructions Category: 3D Printer Parts
This is a modification of the Original Prusa i3 MK2 power supply mount to fit generic power supplies from china. Original source from https://github.com/prusa3d/Original-Prusa-i3/blob/MK2/Printed-Parts/scad/PSU-cover-NODRILL.scad The…
Simple outside tslot corners. In openscad The size of the tslot can be adjusted. I have included examples for 1515 and 2020 Print instructions Category: 3D Printer Parts
I found I needed a rat bait station as the rats in the area are out of control. So I designed one in openscad. The model is pre cutup into printable sized chunks. Printing: I printed with a 0.4 nozzle and 0.35mm layers. The tee requires…
A simple curved pull knob. This stl is a small 20mm diameter, 10mm high with embedded m3 nut. Openscad code is included so you can customize to you needs.
A few mounting clips to clip a common 12 power supply to the inside of the mendelmax frame under the carriage NB this protrudes 10mm under the Mendelmax. You need to raise your mendelmax on feet of some type. I used…
A simple tripod based on tslot. Print for your sized tslot. (tslot size can be adjusted in openscad) 1 base 3 hip 3 foot 3 knob 1 spacer (optional) uses M3x6 and M4x25 bolts and nuts to suit. Is a work in progress... Print instructions…
A simple power pannel for the Mendelmax. To mount a very common power switch and power plug from a old PC power supply Print instructions Category: 3D Printer Parts Instructions Print, file switch hole a little to fit (deliberately very…
The hypercube extruder cable support is for a 16mm cable, I wanted a 8mm variant So I hacked it with openscad to fill the original 16mm gap and replace it with an 8mm.+ some rounding of edges The original hypercube extruder cable support…
I wanted to modify the hypercube printer bed supports. But no scad files. Recreated in openscad, made parametric Modify offset value to lower the position of bed mount arm. NB make sure to leave room for the head of your tslot bolt. A…
I wanted to be able to tenson my Y belt without haveing to pull the machine apart to replace parts. I found two things that where close and basicaly combined them. Since this part was orriginaly a dxf that was extruded and I have no way…
A aluminium reinforced Mendelmax Y Motor mount, this uses a 58mm long bit of of 40x40x3 Aluminium 90 Angle to add a bit of strength, also acts as a heat sink. Print instructions Category: 3D Printer Parts Instructions Print with support.…
This is a simple mount for the 12v to 24v converter supplied with Trinitylabs Y axis upgrade kit. NB 50cm fan pictured is not part of the upgrade kit. I added this after numerous warnings that it gets very warm. Print instructions…
Fairly acurate model of a 4pi reprap controller. Now centered. Print instructions Category: 3D Printer Parts Instructions Positional information and sizes extracted from the eagle brd file. The fuse is optional, selectable in the scad file
Lumen PNP V4 x-cable-chain-support split into 3 parts for printing. The original part is 655mm long, sadly for most of us this is to large to print as one part. I split it into 3 parts with joining tab, so it is printable on a smaller…
This is a remix of the hypercube Z Shaft Clamp v1.1 and v1.2 I have recreated the original in openscad and then extended it. Having one of the bolts behind the smooth rod bugged me greatly, so this version you can use the holes left or…
A simple mount for a lm2596 DC-DC adjustable step-down Voltage regulator for a Watsonbot https://www.thingiverse.com/thing:739024 I didn't like to drive things directly from the batteries (2* protected 18650) so I've limited the voltage…
Updated Z_Carriage for MPSCARA. Additional clamping screw holes added.
These are all currently available results.
