Counting matching models…
Magnetically-attached poop chute. 6x2mm magnets by default Configurable – for width/height and type of the magnets, see OnShape model below Option to mount with a screw that already exists under the poop hole Prints without supports (on…
V2 improvements: Added version with hole for bowden fitting Sturdier screw mount locations V3 improvements: Extended filament guide to ease filament insertion Improved rigidity Onshape model:…
https://cad.onshape.com/documents/d8e59fd26c8f20bd6613be02/w/b96cb695bd654f0bc3794355/e/61c20b9f8ed3bdf2d238030d It turns out not everyone has Autodesk to customize Whity's version, so I made one in Onshape clean-room style just by…
15 to 65 mm3. USAGE Open 3mf file Select PLA/PETG or ABS in “Project >” section of filaments menu. Adjust Temperature in the filament settings to a desired one. Print it. :) Observe height H in mm where defects start to appear. Your max…
Made for ever popular #11 blade, but should fit most. Print with 1.2 mm wall thickness. Adjust scale or #r parameter in the CAD model to change fit tightness. Onshape model:…
Prints vertically on the exhaust side without supports.
New: Remotes_Plus_Phone_Holder_V1 [ OnShape Model ] Holds 3x remotes + phone Extra mounting point at the bottom Remotes_Holder_V3 [ OnShape Model ] + Chamfer to support top bevel printing + Better transition between basket and top
OnShape: https://cad.onshape.com/documents/97ab80d55d952d4a6d011678/w/60e0435bb421551d89d9fd5d/e/ca63a6071255589e906f9789?renderMode=0&uiState=6a48552b3c4a31ee1ceb48de
Suspension feet to isolate Qidi Q1 Pro vibrations to the desk. Don't require removing of the stock ones, just slip over. Print from TPU (tested with Saint Smart 95A) with 3 walls and 20% infill.
Compact rear spool holder for QIDI Q1 Pro with bowden fitting or PTFE tube mount. Ribbed for reduced spool friction. V2 now with holes to stow PTFE tube when not in use!
Creates wide high-speed flow. Good for busting spiderwebs and drying car. Onshape:…
Optimized for 5/32" paracord. Tested for 100lbs load when printed in PETG. Use all perimeters or 100% infill.
Mount for MiniPC to Rubbermaid Fasttrack upright rail or other 1-1/4" rails (Closetmaid, Blue Hawk, Project Source, etc) . STL is for 2x M3 bots 42mm apart (fits this one ), but Onshape model can be trivially adapted for any bolt pattern.
Suggested use: 70mm – best off the groomed trails 60mm – for deep powder, groomed once, without the crust layer at the top 50mm – when hard crust has formed but stock baskets still go through Mount with a zip tie through 2 holes in the…
Print from TPU with 2 or 3 walls and relatively sparse infill so it stays pliable.
Just a box, 100mm on each side, embossed for strength.
These are all currently available results.
![[Now with Handle!] OnBox // Parametric Box in Onshape // V1.5](https://media.printables.com/media/prints/ff85d1b8-2ba0-42ca-b596-011391f943d5/images/13274560_a59cf4e2-86de-4cf8-974e-5751226a6c2f_2226757c-4c62-4dc1-b966-0e6d0b617574/screenshot-2026-07-03-at-52627-pm.png)
