Counting matching models…
This is a remix of Hartk's PG7 mount with some clearance added to fit alongside Minsekt's Y endstop relocation mount . Hardware (affiliate links): Microswitches: https://amzn.to/42ESw9v PG7 cable glands: https://amzn.to/3LL98FD If you…
This is a bowden/PTFE tube coupler that fits an ECAS04 on each end. I've printed mine with PETG, but it should also work fine with other filaments like PLA, ABS or even TPU. I'd recommend cutting a chamfer inside each bowden/PTFE tubes…
This is a mount for the WS7040 fan and its driver PCB. It is meant to fit on an aluminum extrusion. Tested to fit a Voron 2.4 but could probably fit several other printers as well. I've tested it to fit at the back of a Voron 2.4's gantry…
This is a remix of https://www.printables.com/model/348581-voron-stealthburner-lgx-lite-mellow-sb2040 to replace the 5015 fan with a CPAP hose for part cooling. This model only includes parts for the Stealthburner's face. You can get the…
"Breeze" is a simple auxiliary fan system for the Voron 2.4 printer. You can mount up to four 5015 fans on the gantry (two on the left and two on the right). This allows to increase part cooling capabilities, which is useful especially if…
This part can hold an ECAS04 fitting to attach a bowden tube to a dry box. The provided STLs have an angle of 0º and 45º. You can customize the angle and other dimensions by modifying provided Fusion 360 file (Look for the model's…
This is a remix of the purge bucket from the "Nozzle Scrubber with a Little Bucket for Voron 2.4" model by FunFunBoy. I liked the original model but found it a bit too small. So I created a larger one and also added a tilt. This allows…
Fits Microjig dovetail clamps. To print without support, lay it on the front section at an angle (see attached screenshot). I'd recommend printing with PETG at 25% infill for strength. If you like what I'm doing… …consider buying me a ☕…
This is an adapter to fit extended gliders on the back feet of a Stokke Tripp Trapp chair. The locking mechanism was inspired from the great design by JonsBronnu ( https://www.thingiverse.com/thing:1429208 ). The main difference is that…
This is a simple mount to attach a Eufy babycam to a tripod. You just need to glue a 1/4"-20 nut in the bottom hole. I printed mine with 20mm layer height and PETG. Should work with PLA as well. If you like what I'm doing… …consider…
This is a remix of these two excellent designs: Original design: https://www.printables.com/model/161906-voron-18trident24-hepa-filter-ex Remixed design (the one I ended up using for my own setup to fit my HEPA filters):…
This is a brace to repair a rib of a Treasure Garden umbrella that's broken at the joint with another rib. The are 5 holes: 4 holes to secure the two broken pieces together, and one through -hole to attach the repaired rib with the other…
This is a replacement inner rod for the D&D Technologies LokkLatch Deluxe gate latch. Print then cut to length as needed based on the size of your fence post. Recommendations: Material: PETG, ABS, ASA, or PC for weatherproofness. Use a…
Protectors for Stanley chisels 150 Series (1/2", 3/4", and 1-1/4"). Inspired from the protectors that come with the Sweetheart series. I recommend printing in PETG for flexibility and strength. Link to the chisels (affiliate link):…
These are all currently available results.
![Voron 1.8/Trident/2.4 HEPA Filter Exhaust [Remixed fitment with 3 filament input holes]](https://media.printables.com/media/prints/426876/images/3532794_4cd38264-6965-4d17-8da1-91bd6c75d816/pxl_20230316_173042702.jpg)
