Counting matching models…
Made a tpu bumper for the Super Drum 70. From initial tests seems good for around 1.5m drops consistently. Designed with uneven ground in mind, which is why it encompasses the bottom third of the drum. Print tpu bumper with 2 walls or…
This was for a friend and wanted to retain some of the stock parts functionality. He said it works great with the 2 additions listed above. Printed in ASA. 3mf and .step file will be provided if you wish to edit it. Not sure why the step…
Pretty much an identical print to the original TPU bumper i made, except does not require a different rear to bolt onto. Same few tests completed and shake test, held on so seems alright to me. Designed with uneven ground in mind, which…
This was made in like 15 minutes in photoshop then exported to tinkercad. I've tested it with Frontline Foam's and Spectre's M79 barrel adapters with Monkee mods threaded jet blaster barrels, and both work fine. I intentionally made the…
Trying to mimic the shower shells used for the manticore launcher. Not very good at cad so it may look terrible. Will provide step files if out wish to edit. Print nose down, can use brim and then use a de bur tool to clean up. This was…
Uses nerf drum springs instead of spring. Before you hook the top of the drum you need to push the bottom tab back into the inside of the feed lips part, will secure the spring. Also would highly recommend you attach the springs to the…
Ice Breaker - Co2 Breacher Works alright, the rear is tight fitting bit should work. I specify in the instructions i used a gen 2 spexbz. I would recommend using a narfbz, or a spexbz 3.0 or newer , due to both sides are threaded on, and…
Looked around and couldn't find any files for these series of interlocking bases from Bunnings (https://www.bunnings.com.au/montgomery-grey-interlocking-60-drawer-organiser_p0338283 or…
Uploading model i made for a mate. This was my first model I have made with cad, so it may not look the best. Split the .3mf file in slicer and print. As this was for a friend, i can write what components were used to test fit, so I'm not…
Wanted to make a 2 piece pellet smoker sift for my 20L bucket. It has a diameter of 255mm, so it maxes out my printer size. Print the pellet smoker sift top to check if it fits your bucket. For the bottom part of the sift you can either…
These are all currently available results.
